This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Informatics Based Design of Bio-Lubricant with Nano Friction Modifiers and Evaluation of Its Tribological Properties
Technical Paper
2018-28-0100
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Statistical and computational intelligence techniques were employed for informatics based design of nano friction modifiers added bio-lubricant. Systematic data were generated through laboratory experiments, using design of experiment, to study the effect of addition of multi-wall carbon nanotubes as friction modifiers in castor oil on frictional properties. The experimental data were used to develop data driven models using statistical techniques, artificial neural network and fuzzy inference systems. The simulation studies which were based on the model predictions were used to design the nano-lubricant with multi-walled carbon nanotubes as the friction modifiers. The optimum combination of nanotube concentration and load, found from the model predictions, were experimentally validated. To understand the lubrication mechanisms, the surfaces of the pin which were tested with the optimum concentration of nanotube added castor oil were characterized with scanning electron microscope and energy dispersive systems, which showed the adherence of friction modifiers on the steel surface.
Authors
Citation
Bhaumik, S., Datta PhD, S., Pathak PhD, S., and Suresh, N., "Informatics Based Design of Bio-Lubricant with Nano Friction Modifiers and Evaluation of Its Tribological Properties," SAE Technical Paper 2018-28-0100, 2018, https://doi.org/10.4271/2018-28-0100.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 |
Also In
References
- Bartz , W.J. Lubricants and the Environment Tribology International 31 35 47 1998 10.1016/S0301-679X(98)00006-1
- Rudnick , L.R. Synthetics, Mineral Oils, and Bio-Based Lubricants, Chemistry and Technology Florida CRC Press 2013 9781439855379
- Yu , H.L. , Xu , B.S. , Shi , P.J. , Wang , H.M. et al. Tribological Behaviors of Surface-Coated Serpentine Ultrafine Powders as Lubricant Additive Tribology International 43 677 685 2010 10.1016/j.triboint.2009.10.006
- Choi , Y. , Lee , C. , Hwang , Y. , Park , M. et al. Tribological behavior of copper nanoparticles as friction modifiers in oil Curr. Applied Physics 9 124 127 2009 10.1016/j.cap.2008.12.050
- Zhou , J. , Wu , Z. , Zhang , Z. , Liu , W. et al. Study on an Antiwear and Extreme Pressure Additive of Surface Coated LaF3 Nanoparticles in Liquid Paraffin Wear 249 333 337 2001 10.1016/S0043-1648(00)00547-0
- Zhang , B.S. , Xu , B.S. , Yi , X. , and Gao , F. CU Nano Particles Effect on the Tribological Properties of Hydro Silicate Powders as Lubricant Additive for Steel-Steel Contacts Trib. Int. 44 878 886 2011
- Tarasov , S. , Kolubaev , A. , Belyaev , S. , Lerner , M. et al. Study of Friction Reduction by Nano Copper Friction Modifiers to Motor Oil Wear 252 63 69 2001 10.1016/S0043-1648(01)00860-2
- Wu , Y. , Tsui , W.C. , and Liu , T.C. Experimental Analysis of Tribological Properties of Lubricating Oils with Nanoparticle Friction Modifiers Wear 262 819 825 2007
- Padgurska , J. , Rukuiza , R. , Prosycevas , I. , and Kreivaitis , R. Tribological Properties of Lubricant Friction Modifiers of Fe, Cu and Co Nanoparticles Tribology International 60 224 232 2013 10.1016/j.triboint.2012.10.024
- Mohamed , K.A.A. , Xianju , H. , Mai , L. , Qingping , C. et al. Improving the Tribological Characteristics of Piston Ring Assembly in Automotive Engines Using Al 2 O 3 and TiO 2 Nanomaterials as Nano-Lubricant Friction Modifiers Tribology International 103 540 554 2013 10.1016/j.triboint.2016.08.011
- Kimura , Y. , Wakabayashi , T. , Okada , K. , Wada , T. et al. Boron Nitride as a Lubricant Additive Wear 232 199 206 1999 10.1016/S0043-1648(99)00146-5
- Pawlak , Z. , Kaldonski , T. , Pai , R. , and Bayraktar , E. A Comparative Study on the Tribological Behaviour of Hexagonal Boron Nitride (H-Bn) as Lubricating Micro-Particles-an Additive in Porous Sliding Bearings for a Car Clutch Wear 267 1198 1202 2009 10.1016/j.wear.2008.11.020
- Demas , N.G. , Timofeeva , E.V. , Routbort , J.L. , and Fenske , G.R. Tribological Effects of BN and MoS 2 Nanoparticles Added to Poly-Alpha Olefin Oil in Piston Skirt/Cylinder Liner Tests Tribology Letters 47 91 102 2012 10.1007/s11249-012-9965-0
- Bhaumik , S. and Pathak , S.D. Analysis of Anti-Wear Properties of CuO Nano Particles as Friction Modifiers in Mineral Oil (460cSt Viscosity) Using Pin on Disc Tribometer Tribol Ind. 37 196 203 2015
- Bhaumik , S. , Prabhu , S. , and Singh , K.J. Analysis of Tribological Behavior of Carbon Nano Tube Based Industrial Mineral Oil 250cSt Viscosity Adv. Trib. 341365 2014 10.1155/2014/341365
- Wu , H. , Wang , L. , Dong , G. , Yang , S. et al. Lubrication Effectiveness Investigation on the Friendly Capped MoS2, Nanoparticles Lubrication Science 29 115 129 2017 10.1002/ls.1360
- Otero , J.E. , Ochoa , E.G. , Tanarro , C. , Morgado , P.L. et al. Artificial Neural Network Approach to Predict the Lubricated Friction Coefficient Lubrication Science 26 141 162 2014 10.1002/ls.1238
- Senthil Kumar , M.S. , Mohana , S.N. , Sampath , P.S. , and Vivek , U. Tribological Analysis of Nano Clay/Epoxy/Glass Fiber by Using Taguchi’s Technique Materials and Design 70 1 9 2015 10.1016/j.matdes.2014.12.033
- Pattanaik , A. , Satpathy , M.P. , and Mishra , S.C. Dry Sliding Wear Behavior of Epoxy Fly Ash Composite with Taguchi Optimization Engineering Science and Technology, an International Journal 19 710 716 2016 0.1016/j.jestch.2015.11.010
- Piddy , K.L. and Keller , P.E. Artificial Neural Network: An Introduction US SPIE Press 2005 9780819459879
- Ross , T.J. Fuzzy Logic with Engineering Application US Wiley 2004 10.1002/9781119994374
- Datta , S. Materials Design Using Computational Intelligence Techniques Florida CRC Press 2017 9781482238327
- Datta , S. and Chattopadhyay , P.P. Soft Computing Techniques in Advancement of Structural Metals International Materials Review 58 475 504 2013 10.1179/1743280413Y.0000000021
- Sinha , A. , Datta , S. , Chakraborty , P.C. , and Chattopadhyay , P.P. Understanding the Shape Memory Behavior in Ti-(~49 at. %) Ni Alloy by Nano Indentation Measurement Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 44 1722 1729 2013 10.1007/s11661-012-1516-7
- Kundu , M. , Ganguly , S. , Datta , S. , and Chattopadhyay , P.P. Simulating Time Temperature Transformation Diagram of Steel Using Artificial Neural Network Mater. Manuf. Proc. 24 169 173 2009
- Dey , S. , Sultana , N. , Salim , K.M. , Dey , P. , and Datta , S. Computational Intelligence Based Design of Age-Hardenable Aluminium Alloys for Different Temperature Regimes Mater. Des 292 522 534 2016 10.1016/j.matdes.2015.12.076
- Ganguly , S. and Datta , S. Imprecise Knowledge and Fuzzy Modeling in Materials Domain Datta S. , Davim J.P. Computational Approaches to Materials Design: Theoretical and Practical Aspects IGI Global 2016 10.4018/978-1-5225-0290-6
- Dey , S. , Datta , S. , Chattopadhyay , P.P. , and Sil , J. Modeling the Properties of TRIP Steel Using AFIS: A Distributed Approach Comp. Mater. Sci. 43 501 511 2008 10.1016/j.commatsci. 2007.12.009
- Datta , S. , Mahfouf , M. , Zhang , Q. , Chattopadhyay , P.P. , and Sultana , N. Imprecise Knowledge Based Design and Development of Titanium Alloys for Prosthetic Applications J Mech. Behav. Biomed. Mater. 53 350 365 2015 10.1016/j.jmbbm.2015.08.039
- Prabhu , S. , Uma , M. , and Vinayagam , B.K. Surface Roughness Prediction Using Taguchi-Fuzzy Logic-Neural Network Analysis for CNT Nanofluids Based Grinding Process Neural Comput. Appl. 26 41 55 2015 10.1007/s00521-014-1696-8
- Thottackkad , M.V. , Perikinalil , R.K. , and Kumarapillai , P.N. Experimental Evaluation on the Tribological Properties of Coconut Oil by Addition of CuO Nanoparticles Int. J Precis. Eng. Man. 13 111 116 2012 10.1007/s12541-012-0015-5
- Bhadeshia , H.K.D.H. Neural Networks in Materials Science ISIJ International 39 10 966 979 1999 10.2355/isijinternational.39.966
- Bhadeshia , H.K.D.H. Neural Networks and Information in Material Science Statistical Analy Data Mining 1 296 305 10.1002/sam.10018
- Jang , J.S.R. , Sun , C.T. , and Mizutani , E. Neuro Fuzzy and Soft Computing: A Computational Approach to Learning and Machine Intelligence Englewood Cliffs. New Jersey Prentice Hall 1997 978-0132610667
- Martin , J.M. , Matta , C. , Bouchet , M. , Forest , C. et al. Mechanism of Friction Reduction of Unsaturated Fatty Acids as Additives in Diesel Fuels Friction 1 252 258 2013 10.1007/s40544-013-0022-2
- Ossia , C.V. , Han , H.G. , and Kong , H. Response Surface Methodology for Eicosanoic Acid Tribo Properties in Castor Oil Tribology International 42 50 58 2008 10.1016/j.triboint.2008.05.018
- Reeves , C.J. , Menezes , P.L. , and Lovell , M.R. The Influence of Surface Roughness and Particulate Size on the Tribological Performance of Bio-Based Multi-Functional Hybrid Lubricants Tribol. 88 40 55 2015 10.1016/j.triboint.2015.03.005
- Zhang , L. , Jibin , P. , Liping , W. , and Qunji , X. Synergistic Effect of Hybrid Carbon Nanotube−Graphene Oxide as Nanoadditive Enhancing the Frictional Properties of Ionic Liquids in High Vacuum ACS Applied Materials & Interfaces 7 16 8592 8600 2015 10.1021/acsami.5b00598
- Cursaru , D.L. , Andronescu , C. , Pirvu , C. , and Ripeanu , R. The Efficiency of Co-Based Single-Wall Carbon Nanotubes (SWNTs) as an AW/EP Additive for Mineral Base Oils Wear 290-291 133 139 2012 10.1016/j.wear.2012.04.019
- Bowden , F.P. and Tabor , D. The Friction and Lubrication of Solids: Part I New York Oxford University Press 1950 9780198507772
- Johnson , K.L. Contact Mechanics Cambridge Cambridge University Press 1987 10.1017/CBO9781139171731
- Kashyap , K.T. and Patil , R.G. On Young’s Modulus of Multi Walled Carbon Nano Tubes Bull. Materials Science 31 185 187 2008 10.1007/s12034-008-0032-2