This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Study on the Turning Characteristics and Optimization of MOS 2 p and SiCp-Reinforced Al-Si10Mg Metal Matrix Composites
Technical Paper
2018-28-0043
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
In the fabrication of parts in auto and aero segments, the use of ceramic (SiCp, Al2O3p) reinforces aluminum alloy found to be increased than that of steel and cast iron. This matrix-reinforced alloy has a high strength to weight ratio along with higher modulus and hardness, the lower thermal coefficient of expansion, and improved tribological properties. To this extent, this paper investigates the turning characteristics and optimization study of newly developed metal matrix composites by the addition of both hard ceramic SiCp and soft stable lubricant molybdenum disulfide (MoS2p). The samples such as Sample 1: AlSi10Mg/3SiCp, Sample 2: AlSi10Mg/2MoS2p and Sample 3: AlSi10Mg/3SiCp /2MoS2p are prepared using the automated stir-casting machine. The particles are observed to be uniformly distributed in the composite. After density and hardness measurement, the samples are subjected to machining, and the responses are optimized by using response surface method. From the optimal points of investigation, the addition of MoS2P along with SiCp in sample 3 prevent the entrapment of hard particles in tool/workpiece interface for both sharp and dull thus tool life is increased 14 min that of 10 min for sample 1. The controlled formation of built-up edge protects the cutting edge and acts as a sacrificial coating also contributed to improving the tool life for sample 3 that of sample 1. Also, the surface morphology of flank face reveals abrasive, and adherence is the primary wear mechanism at the time of machining. Further, the investigation results show that for industrial applications the addition of solid lubricant MOS2p alone to aluminum does not help to improve lubrication properties of the aluminum alloy.
Authors
Topic
Citation
Kannan, V. and Kannan, V., "A Study on the Turning Characteristics and Optimization of MOS2p and SiCp-Reinforced Al-Si10Mg Metal Matrix Composites," SAE Technical Paper 2018-28-0043, 2018, https://doi.org/10.4271/2018-28-0043.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 |
Also In
References
- Ramnath , B.V. , Elanchezhian , C. , Annamalai , R.M. , Aravind , S. et al. Aluminium Metal Matrix Composites-A Review Rev. Adv. Mater. Sci. 38 5 55 60 2014
- Nicholls , C.J. , Boswell , B. , Davies , I.J. , and Islam , M.N. Review of Machining Metal Matrix Composites The International Journal of Advanced Manufacturing Technology 90 9-12 2429 2441 2017 10.1007/s00170-016-9558-4
- Murty , S.N. , Rao , B.N. , and Kashyap , B.P. On the Hot Working Characteristics of 6061Al-SiC and 6061-Al 2 O 3 Particulate Reinforced Metal Matrix Composites Composites Science and Technology 63 1 119 135 2003 https://doi.org/10.1016/S0266-3538(02)00197-5
- Previtali , B. , Pocci , D. , and Taccardo , C. Application of Traditional Investment Casting Process to Aluminum Matrix Composites Composites Part A: Applied Science and Manufacturing 39 10 1606 1617 2008 https://doi.org/10.1016/j.compositesa.2008.07.001
- Tan , E. and Ögel , B. Influence of Heat Treatment on the Mechanical Properties of the AA6066 Alloy Turkish Journal of Engineering and Science 31 1 53 60 2007
- Troeger , L.P. and Starke , E.A. Jr. Microstructural and Mechanical Characterization of a Superplastic 6xxx Aluminum Alloy Material Science and Engineering A 277 1-2 102 113 2000 https://doi.org/10.1016/S0921-5093(99)00543-2
- Basavarajappa , S. , Chandramohan , G. , Rao , K.N. , Radhakrishanan , R. et al. Turning of Particulate Metal Matrix Composites-Review and Discussion Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220 7 1189 1204 2006 https://doi.org10.1243/09544054JEM304
- Das , S. Development of Aluminium Alloy Composites for Engineering Applications Trans. Indian Inst. Met 57 25 334 2004
- Ozben , T. , Kilickap , E. , and Cakır , O. Investigation of Mechanical and Machinability Properties of SiC Particle Reinforced Al-MMC Journal of Material Processing Technology 198 1 220 225 2008 https://doi.org/10.1016/j.jmatprotec.2007.06.082
- Debnath , S. , Oo , Z. , Rahman , M. , Maleque , M. et al. Physio-Mechanical Properties of Aluminum Metal Matrix Composites Reinforced with Al2O3 and SiC International Journal of Materials and Metallurgical Engineering 6 288 291 2012
- Peng , Z. , and Fuguo , L. Effects of Particle Clustering on the Flow Behavior of SiC Particle Reinforced Al Metal Matrix Composites Rare Metal Materials and Engineering 39 9 1525 1531 2010 https://doi.org/10.1016/S1875-5372(10)60123-3 Journal of Material Processing Technology https://doi.org/10.1016/j.jmatprotec.2005.06.071
- Roy , P. , Sarangi , S.K. , Ghosh , A. , and Chattopadhyay , A.K. Machinability Study of Pure Aluminum and Al-12% Si Alloys against Uncoated and Coated Carbide Inserts International Journal of Refractory Metals and Hard Materials 27 3 535 544 2009 https://doi.org/10.1016/j.ijrmhm.2008.04.008
- Basavarajappa , S. and Davim , J.P. Influence of Graphite Particles on Surface Roughness and Chip Formation Studies in Turning Metal Matrix Composites Materials Research 16 5 990 996 2013 http://dx.doi.org/10.1590/S1516-14392013005000098
- Vinoth , K.S. , Subramanian , R. , Dharmalingam , S. , and Anandavel , B. Mechanical and Tribological Characteristics of Stir-Cast Al-Si10Mg and Self-Lubricating Al-Si10Mg/MoS2 Composites Materials and technology 46 5 497 501 2012
- Kumar , N.S. , Shankar , G.S. , Basavarajappa , S. , and Suresh , R. Some Studies on Mechanical and Machining Characteristics of Al2219/nB4C/MoS2 Nano-Hybrid Metal Matrix Composites Measurement 107 1 11 2017 https://doi.org/10.1016/j.measurement.2017.05.003
- Davoodi , B. and Eskandari , B. Tool Wear Mechanisms and Multi-Response Optimization of Tool Life and Volume of Material Removed in Turning of N-155 Iron-Nickel-Base Superalloy Using RSM Measurement 68 286 294 2015 https://doi.org/10.1016/j.measurement.2015.03.006
- Rajmohan , T. and Palanikumar , K. Experimental Investigation and Analysis of Thrust Force in Drilling Hybrid Metal Matrix Composites by Coated Carbide Drills Materials and Manufacturing Processes 26 8 961 968 2011 https://doi.org/10.1080/10426914.2010.523915
- Rajmohan , T. , Palanikumar , K. , and Kathirvel , M. Optimization of Machining Parameters in Drilling Hybrid Aluminium Metal Matrix Composites Transactions of Nonferrous Metals Society of China 22 6 1286 1297 2012 https://doi.org/10.1016/S1003-6326(11)61317-4
- Bhushan , R.K. Multiresponse Optimization of Al Alloy-SiC Composite Machining Parameters for Minimum Tool Wear and Maximum Metal Removal Rate Journal of Manufacturing Science and Engineering 135 2 021013 2013 10.1115/1.4023454
- Ekici , E. , Motorcu , A.R. , and Uzun , G. An Investigation of the Effects of Cutting Parameters and Graphite Reinforcement on Quality Characteristics during the Drilling of Al/10B4C Composites Measurement 95 395 404 2017 https://doi.org/10.1016/j.measurement.2016.10.041
- Joardar , H. , Das , N.S. , Sutradhar , G. , and Singh , S. Application of Response Surface Methodology for Determining Cutting Force Model in Turning of LM6/SiCP Metal Matrix Composite Measurement 47 452 464 2014 https://doi.org/10.1016/j.measurement.2013.09.023
- Santos , M.C. Jr., Machado , A.R. , Sales , W.F. , Barrozo , M.A. et al. Machining of Aluminum Alloys: A Review The International Journal of Advanced Manufacturing Technology 86 3067 3080 2016 10.1007/s00170-016-8431-9
- Demir , H. and Gündüz , S. The Effects of Aging on Machinability of 6061 Aluminium Alloy J. Material and Design 30 5 1480 1483 2009 https://doi.org/10.1016/j.matdes.2008.08.007
- Hovsepian , P.E. , Luo , Q. , Robinson , G. , Pittman , M. et al. TiAlN/VN Superlattice Structured PVD Coatings: A New Alternative in Machining of Aluminium Alloys for Aerospace and Automotive Components Surface Coating Technology 201 1-2 265 272 2006 https://doi.org/10.1016/j.surfcoat.2005.11.106 The International Journal of Advanced Manufacturing Technology https://doi.org/10.1007/s00170-007-1220-8
- Amouri , K. , Kazemi , S. , Momeni , A. , and Kazazi , M. Microstructure and Mechanical Properties of Al-Nano/Micro SiC Composites Produced by Stir Casting Technique Material Science and Engineering A 674 569 578 2016 https://doi.org/10.1016/j.msea.2016.08.027
- Kok , M. Production and Mechanical Properties of Al2O3 Particle Reinforced 2024 Aluminium Alloy Composites Journal of Material Processing Technology 161 381 387 2005 https://doi.org/10.1016/j.jmatprotec.2004.07.068
- Sahin , Y. Wear Behaviour of Aluminium Alloy and its Composites Reinforced by SiC Particles Using Statistical Analysis Material and Design 24 95 103 2003 https://doi.org/10.1016/S0261-3069(02)00143-7
- Sakthivel , A. , Palaninathan , R. , Velmurugan , R. , and Rao , P.R. Production and Mechanical Properties of SiCp Particle-Reinforced 2618 Aluminum Alloy Composites Journal of Material Science 43 22 7047 7056 2008 https://doi.org/10.1007/s10853-008-3033-z
- El-Kady , E.Y. , Gaafer , A.M. , Ghaith , M.H.G. , Khalil , T. et al. The Effect of Machining Parameters on the Cutting Forces,S Tool Wear, and Machined Surface Roughness of Metal Matrix Nano Composite Material Advances in Materials 4 3 43 50 2015 10.11648/j.am.20150403.11
- Priyadarshi , D. and Sharma , R.K. Optimization for Turning of Al-6061-SiC/Gr Hybrid Nano Composites Using Response Surface Methodologies Materials and Manufacturing Process 31 1342 1350 2016 https://doi.org/10.1080/10426914.2015.1070427
- Srinavasan , A. , Arunachalam , R.M. , Ramesh , S. , and Senthilkumaar , J.S. Selection of Optimal Machining Parameters for Metal Matrix Composites Using Taguchi Technique Indian Journal of Applied Research 1 2 36 38 2010
- Rabindra , B. and Sutradhar , G. Machinability of LM6/SiCp Metal Matrix Composites with Tungsten Carbide Cutting Tool Inserts ARPN Journal of Engineering and Applied Sciences 7 2 216 221 2012
- Kanthavel , K. , Sumesh , K.R. , and Saravanakumar , P. Study of Tribological Properties on Al/Al 2 O 3 /MoS2 Hybrid Composite Processed by Powder Metallurgy Alexandria Engineering Journal 55 1 13 17 2016 https://doi.org/10.1016/j.aej.2016.01.024
- Toptan , F. , Kilicarslan , A. , and Kerti , I. The Effect of Ti Addition on the Properties of Al-B4C Interface: A Microstructural Study Materials Science Forum 636-637 192 197 2010 10.4028/www.scientific.net/MSF.636-637.192
- Razavykia , A. , Farahany , S. , and Yusof , N.M. Evaluation of Cutting Force and Surface Roughness in the Dry Turning of Al-Mg2Si In-Situ Metal Matrix Composite Inoculated with Bismuth Using DOE Approach Measurement 76 170 182 2015 https://doi.org/10.1016/j.measurement.2015.08.032
- Grum , J. and Kisin , M. The Influence of the Microstructure of three Al-Si Alloys on the Cutting-Force Amplitude during Fine Turning International Journal of Machine Tools and Manufacture 46 7-8 769 781 2006 https://doi.org/10.1016/j.ijmachtools.2005.07.032
- Basavarajappa , S. Tool Wear in Turning of Graphitic Hybrid Metal Matrix Composites Materials and Manufacturing Process 24 484 487 2009 https://doi.org/10.1080/10426910802714431
- Bansal , P. and Upadhyay , L. Experimental Investigations to Study Tool Wear during Turning of Alumina Reinforced Aluminum Composite Procedia Engineering. 51 818 827 2013 https://doi.org/10.1016/j.proeng.2013.01.117
- Derringer , G. and Suich , R. Simultaneous Optimization of Several Response Variables Journal of quality technology 12 4 214 219 1980
- Seeman , M. , Ganesan , G. , Karthikeyan , R. , and Velayudham , A. Study on Tool Wear and Surface Roughness in Machining of Particulate Aluminum Metal Matrix Composite Response Surface Methodology Approach The International Journal of Advanced Manufacturing Technology 48 5-8 613 624 2010 https://doi.org/10.1007/s00170-009-2297-z
- Subramanian , A.V.M. , Nachimuthu , M.D.G. , and Cinnasamy , V. Assessment of Cutting Force and Surface Roughness in LM6/SiCp Using Response Surface Methodology Journal of Applied Research and Technology 15 3 283 296 2017 https://doi.org/10.1016/j.jart.2017.01.013