This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Application of TOPSIS with Taguchi Method for Multi-Attribute Optimization of Machining Parameters in EDM
Technical Paper
2018-28-0033
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The present work focused on application of TOPSIS along with Taguchi method to optimize machining parameters in Electrical Discharge Machining (EDM) of Titanium alloy (Ti-6Al-4 V) considering it as multi-attribute problem. The L9 orthogonal array of Taguchi method is used to conduct experiments. During experimentation Titanium alloy (Ti-6Al-4 V) is chosen as a work material and electrolyte copper is selected as a tool electrode. Whereas peak current, pulse on time and pulse off time are chosen as machining parameters. TOPSIS method is applied to determine the optimal combination of machining parameters to yield maximum material removal rate MRR), minimum tool wear rate (TWR) and surface roughness (SR) simultaneously. Confirmation experiments have been done at optimal parametric setting, then results are compared with predicted values and it was found that percentage error is less than 5.
Authors
Citation
Vaddi, V., Ch, S., Bushaboina, S., and Banka, H., "Application of TOPSIS with Taguchi Method for Multi-Attribute Optimization of Machining Parameters in EDM," SAE Technical Paper 2018-28-0033, 2018, https://doi.org/10.4271/2018-28-0033.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
Unnamed Dataset 6 | ||
Unnamed Dataset 7 | ||
Unnamed Dataset 8 |
Also In
References
- Vikram Reddy , V. , Kumar , A. , MadarValli , P. , and Sridhar Reddy , C.H. Influence of Surfactant and Graphite Powder Concentration on Electrical Discharge Machining of PH17-4 Stainless Steel Journal of the Brazilian Society of Mechanical Sciences and Engineering 37 2 641 655 2015 10.1007/s40430-014-0193-4
- Tripathy , S. and Tripathy , D.K. Multi-Attribute Optimization of Machining Process Parameters in Powder Mixed Electro-Discharge Machining Using TOPSIS and Grey Relational Analysis Engineering Science and Technology, an International Journal 19 62 70 2016
- Gadakh , V. S. Parametric Optimization of Wire Electrical Discharge Machining Using TOPSIS Method Advances in Production Engineering & Management 7 2012 3 157 164 1854-6250
- Kanwar , R.K. and Dubey , M. Parameters Optimization of Electrical Discharge Machine of ZrB2-SiC by Using TOPSIS Method International Journal of Engineering Science and Computing 6 6 2016 10.4010/2016.1559
- Arun Kumar Parida and Bharat Chandra Routara International Scholarly Research Notices, 2014
- Kasdekar , D.K. and Parashar , V. MADM Approach for Optimization of Multiple Responses in EDM of En-353 Steel International Journal of Advanced Science and Technology 83 59 70 2015
- Prabhu , S. and Vinayagam , B.K. Multiresponse Optimization of EDM Process with Nanofluids Using Topsis Method And Genetic Algorithm Archive of Mechanical Engineering LXIII 1 2016
- Dewangan , S. , Gangopadhyay , S. , and Biswas , C.K. Study of Surface Integrity and Dimensional Accuracy in EDM Using Fuzzy TOPSIS and Sensitivity Analysis Measurement 63 364 376 2015
- Balasubramanian , P. and Senthilvelan , T. Optimization of Machining Parameters in EDM Process Using Cast and Sintered Copper Electrodes 3rd International Conference on Materials Processing and Characterisation (ICMPC 2014) Procedia Materials Science 6 2014 1292 1302
- Pecas , P. and Henriques , E. Influence of Silicon Powder-Mixed Dielectric on Conventional Electrical Discharge Machining International Journal of Machine Tools & Manufacture 43 1465 1471 2003