This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Optimization of Electrical Discharge Machining of Titanium Alloy (Ti-6Al-4 V) Using Taguchi-DEAR Method
Technical Paper
2018-28-0032
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Electrical discharge machining (EDM) process is widely used unconventional machining process in manufacturing industry for machining high hardness materials and to make dies of complex cavities. In this work experiments are carried out during electric discharge machining of Titanium alloy (Ti-6Al-4 V). Taguchi L9 orthogonal array is used to conduct experiments. Process parameters, such as, peak current, pulse on time and pulse off time are chosen for this study. Whereas performance characteristics namely material removal rate (MRR), tool wear rate (TWR) and surface roughness (SR) are selected for this study. The significance of process parameters on performance characteristics is analyzed. The objective of present work is to find optimal combination of parameters that gives maximum MRR and minimum TWR and SR simultaneously. Taguchi-data envelopment analysis-based ranking method is used for above multi-response optimization.
Authors
Topic
Citation
Vaddi, V., Ch, S., Pogaku, V., and Bushaboina, S., "Optimization of Electrical Discharge Machining of Titanium Alloy (Ti-6Al-4 V) Using Taguchi-DEAR Method," SAE Technical Paper 2018-28-0032, 2018, https://doi.org/10.4271/2018-28-0032.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Unnamed Dataset 4 | ||
| Unnamed Dataset 5 | ||
| Unnamed Dataset 6 | ||
| Unnamed Dataset 7 |
Also In
References
- Vikram Reddy , V. , Madar Valli , P. , Kumar , A. , and Sridhar Reddy , C. Influence of Process Parameters on Characteristics of Electrical Discharge Machining of PH17-4 Stainless Steel Journal of Advanced Manufacturing Systems 14 189 2015
- Vikram Reddy , V. , Madar Valli , P. , Kumar , A. , and Sridhar Reddy , C. Multi-Objective Optimization of Electrical Discharge Machining of PH17-4 Stainless Steel with Surfactant-Mixed and Graphite Powder-Mixed Dielectric Using Taguchi-Data Envelopment Analysis-Based Ranking Method Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 229 3 487 494 2015 10.1177/0954405414530904
- Guu , Y.H. and Hocheng , H. Effects of Work Piece Rotation on Machinability during Electrical Discharge Machining J. Mater. Manuf. Processes 16 1 91 101 2001
- Chattopadhyay , K.D. , Verma , S. , Satsangi , P.S. , and Sharma , P.C. Development of Empirical Model for Different Process Parameters during Rotary Electrical Discharge Machining of Copper-Steel (EN-8) System J Mater Process Tech 209 1454 1465 2009
- Kao , J.Y. , Tsao , C.C. , Wang , S.S. , and Hsu , C.Y. Optimization of the EDM Parameters on Machining Ti-6Al-4V with Multiple Quality Characteristics International Journal of Advanced Manufacturing Technology 47 1 395 402 2010 10.1007/s00170-009-2208-3
- Chittaranjan Das , V. and Srinivas , C. Optimization of Multiple Response Characteristics on EDM Using the Taguchi Method and Grey Relational Analysis International Journal of Scientific Research and Reviews, IJSRR 3 1 25 39 2014
- Raghuraman , S. , Thiruppathi , K. , Panneerselvam , T. , and Santosh , S. Optimization of EDM Parameters Using Taguchi Method and Grey Relational Analysis for Mild Steel is 2026 International Journal of Innovative Research in Science, Engineering and Technology 2 7 2013
- Patel , K.M. , Pandey , P.M. , and Rao , P.V. Study on Machinability of Al2O3 Ceramic Composite in EDM Using Response Surface Methodology Journal of Engineering and Technology, Transactions of the ASME 133 2 1 10 2011
- Rajesh , R. and Dev Anand , M. The Optimization of the Electro-Discharge Machining Process Using Response Surface Methodology and Genetic Algorithms Procedia Engineering International Conference on Modeling, Optimization and Computing 38 3941 3950 2012
- Pushpendra , S. , Bharti , S. , Maheshwari , and Sharma , C. Multi-Objective Optimization of Electric-Discharge Machining Process Using Controlled Elitist NSGA-II Journal of Mechanical Science and Technology 6 1875 1883 2012
- Singh , S. et al. Optimization of Machining Characteristics in Electric Discharge Machining of 6061Al/Al 2 O 3 p/20P Composites by Grey Relational Analysis The International Journal of Advanced Manufacturing Technology 63 9 1191 1202 2012