This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Adaptronic Actuator to Minimize the Pins Misalignment on Pin-on-Disc Testers
Technical Paper
2018-01-1892
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The Automated Universal Tribotester (AUT) represents a fully automated reduced scale brake dynamometer and was developed by the Institute of Dynamics and Vibrations at TU Braunschweig. The setup is based on the pin-on-disc principle. The downscaled test specimen is brought to contact to the disc, loaded and guided via the load unit, which was specifically designed for this purpose. It is laid out as a combination of parallel and serial leaf springs, facilitating a friction free and horizontal motion. The stiffness in radial and tangential directions are much higher than in normal orientation.
If the test specimen has a two-dimensional, flat contact surface, the misalignment of the pin in a Pin-on-Disc setup is a phenomenon that appears even in very stiff and robust Pin-on-Disc testers. The measured friction forces are not sensitive to the tilting movement, but the wear processes that take place in the contact zone are.
For investigations of the friction surface, an adaptive adjustment is necessary if no long measurement intervals with constant system preferences are tested. This paper shows the adaptive adjustment and the influence on measurements of friction and wear.
Topic
Citation
Vogel, A. and Ostermeyer, G., "Adaptronic Actuator to Minimize the Pins Misalignment on Pin-on-Disc Testers," SAE Technical Paper 2018-01-1892, 2018, https://doi.org/10.4271/2018-01-1892.Also In
References
- Ostermeyer , G.-P. On the Dynamics of the Friction Coefficient Wear 254 2003
- Ostermeyer , G.-P. , Völpel , A. , and Müller , M. A Method towards Investigating the Influence of ODE Based Friction Laws in the Frequency Domain Proceedings of Eurobrake 2016 Milan 2016
- Völpel , A. and Ostermeyer , G.-P. Investigation of the Influence of ODE Based Friction Models on Complex FEM Brake Models in the Frequency Domain SAE Int. J. Passeng. Cars - Mech. Syst. 9 3 1206 1213 2016 10.4271/2016-01-1931
- Ostermeyer , G.-P. , Schramm , T. , Raczek , S. , Bubser , F. , et al. The Automated Universal Tribotester EB2015-STQ-016 2015
- Ostermeyer , G.-P. and Raczek , S. On Implementing a Simulated Moment of Inertia in a Reduced Scale Brake Dynamometer Journal of Mechanics Engineering an Automation 7 111 116 2017
- Raczek , S. and Ostermeyer , G.-P. Development and Implementation of Constant Friction Power Control in a Reduced Scale Brake Dynamometer for Investigations of Automotive Brake Systems Journal of Mechanics Engineering and Automation 6 282 287 2016
- Garcia-Prieto , I. , Faulkner , M.D. , and Alcock , J.R. The Influence of Specimen Misalignment on Wear in Conforming Pin on Disk Tests 2004
- Ostermeyer , G.-P. and Vogel , A. Principal Measurement Inaccuracies of Pin-on-Disc Testers and Associated Mitigation Efforts SAE Technical Paper 2017-01-2497 2017 10.4271/2017-01-2497
- Burris , D.L. and Sawyer , W.G. Addressing Practical Challenges of Low Friction Coefficient Measurements Tribology Letters 35 2009
- Sidebottom , M.A. and Krick , B.A. Transducer Misalignment and Contact Pressure Distributions as Error Sources in Friction Measurement on Small-Diameter Pin-on-Disk Experiments Tribology Letters 2015
- Schmitz , T.L. , Action , J.E. , Ziegert , J.C. , and Sawyer , W.G. The Difficulty of Measuring Low Friction: Uncertainty Analysis for Friction Coefficient Measurements Journal of Tribology 127 2005
- Mosleh , M. , Blau , P.J. , and Dumitrescu , D. Characteristics and Morphology of Wear Particles from Laboratory Testing of Disk Brake Materials Wear 256 2004
- Wirtz , M. , Sachse , H. , Lienerth , P. , Lugovyy , D. , et al. Inertia Brake Dynamometer Dust Particle Measurement EB2015-EFP-008, EuroBrake 2015 Dresden 2015
- Iijima , A. , Sato , K. , Yano , K. , Tago , H. et al. Particle Size and Composition Distribution Analysis of Automotive Brake Abrasion Dusts for the Evaluation of Antimony Sources of Airborne Particulate Matter Atmospheric Environment 2007
- Belhocine , A. and Omar , W.Z.W. Predictive Modeling and Simulation of the Structural Contact Problems between the Brake Pads and Rotor in Frictional Sliding Contact International Journal on Interactive Design and Manufacturing (IJIDeM) 2018
- Wenglor Sensoric GmbH 2017 https://www.wenglor.com/index.php?L=1&id=1148&tx_wsshoploader_pi1[url]=catalog/productDetail.jsf;;wec-appid::Shop_1000_EXT_DE;;wec-locale::de_DE;;itemKey::IW045CM65MG3;;ifr::y