This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Efficient Vibro-Acoustic Optimisation of a Thermoplastic Composite Oil Pan
Technical Paper
2018-01-1480
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Thermoplastic fibre reinforced composites offer a wide range of adjusting the material behaviour by varying material selection, layup and fibre orientation. By default, damping and stiffness of composites are contradictory material properties related to the fibre orientation. Thus, finite element analysis (FEA) based composite design requires special modelling efforts implying anisotropic damping of the composite as well as fluid-structure-inter-action for the oil filling. In contrast, multi-dimensional optimisations for various layups require computationally fast numerical solutions.
In this study, a complex but efficient vibro-acoustic modelling approach of a composite oil pan is presented. The FEA model includes a strain energy based modal damping approach for the layerwise accumulation of the anisotropic composite damping as well as a structural representation of the additional mass of the oil filling avoiding fluid modelling. Moreover, the radiated sound power of the component is determined by a structural dynamic steady state FEA using surface velocity based approaches. Next, the scalar optimisation objective, the mean sound power or the total energy within the frequency range, is further estimated by a semi-analytic approximation based on the resonance values.
This continuous simulation methodology is further used to design a vibro-acoustically optimised layup for a thermoplastic composite oil pan. The fibre orientation of single layers is chosen assuring a light, stiff and less radiating component.
Authors
Citation
Klaerner, M., Wuehrl, M., Kroll, L., and Marburg, S., "Efficient Vibro-Acoustic Optimisation of a Thermoplastic Composite Oil Pan," SAE Technical Paper 2018-01-1480, 2018, https://doi.org/10.4271/2018-01-1480.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 |
Also In
References
- Ganguli , R. Optimum Design of a Helicopter Rotor for Low Vibration Using Aeroelastic Analysis and Response Surface Methods Journal of Sound and Vibration 258 2 327 344 2002
- Narita , Y. Layerwise Optimization for the Maximum Fundamental Frequency of Laminated Composite Plates Journal of Sound and Vibration 263 5 1005 1016 2003
- Denli , H. and Sun , J. Structural-Acoustic Optimization of Sandwich Structures with Cellular Cores for Minimum Sound Radiation Journal of Sound and Vibration 301 1-2 93 105 2007
- Adams , R.D. and Maheri , M.R. Dynamic Flexural Properties of Anisotropic Fibrous Composite Beams Composites Science and Technology 50 4 497 514 1994
- Maheri , M.R. The Effect of Layup and Boundary Conditions on the Modal Damping of Frp Composite Panels Journal of Composite Materials 45 13 1411 1422 2011
- Billups , E. and Cavalli , M. 2d Damping Predictions of Fiber Composite Plates: Layup Effects Composites Science and Technology 68 3-4 727 733 2008
- Finegan , I.C. and Gibson , R.F. Recent Research on Enhancement of Damping in Polymer Composites Composite Structures 44 2-3 89 98 1999
- Ulke-Winter , L. , Klaerner , M. , and Kroll , L. Determining the Damping Behavior of Fiber Reinforced Composites: A New Approach to Find Mathematical Relationships in Data Sets Composite Structures 100 34 39 2013
- Klaerner , M. , Wuehrl , M. , Kroll , L. , and Marburg , S. FEA-Based Methods for Optimising Structure-Borne Sound Radiation Mechanical Systems and Signal Processing 89 37 47 2017
- Sepahvand , K. Spectral Stochastic Finite Element Vibration Analysis of Fiber-Reinforced Composites with Random Fiber Orientation Composite Structures 145 119 128 2016
- Marburg , S. , Beer , H.-J. , Gier , J. , Hardtke , H.-J. et al. Experimental Verification of Structural-Acoustic Modelling and Design Optimization Journal of Sound and Vibration 252 4 591 615 2002
- Fritze , D. , Marburg , S. , and Hardtke , H.-J. Estimation of Radiated Sound Power: A Case Study on Common Approximation Methods Acta Acustica United with Acustica 95 833 842 2009
- Klaerner , M. , Wuehrl , M. , Kroll , L. , and Marburg , S. Characteristic Amplitude-Frequency Functions of the Radiated Sound Power Proceedings of Meetings on Acoustics 30 1 2017 065005
- Wittenburg , J. , Richard , H.A. , Zierep , J. , and Bühler , K. Das Ingenieurwissen: Technische Mechanik Berlin, Heidelberg Springer 2014
- Harris , C.M. and Piersol , A.G. Harris’ Shock and Vibration Handbook 5 New York McGraw-Hill 2002
- Gross , D. , Hauger , W. , Schröder , J. , Wall , W. , and Sanjay , G. Engineering Mechanics 3: Dynamics Berlin, Heidelberg Springer-Verlag 2011
- Reichert , R. , Mohan , P. , Marzougui , D. , Kan , C.-D. , and Brown , D. Validation of a Toyota Camry Finite Element Model for Multiple Impact Configurations SAE Technical Paper 2016-01-1534 2016 10.4271/2016-01-1534
- Center for Collison Safety and Analysis (CCSA), George Manson University 2016
- Adams , R.D. and Bacon , D.G.C. Effect of Fibre Orientation and Laminate Geometry on the Dynamic Properties of Cfrp Journal of Composite Materials 7 402 428 1973
- Klaerner , M. , Wuehrl , M. , Kroll , L. , and Marburg , S. Modelling and Fea-Simulation of the Anisotropic Damping of Thermoplastic Composites Advances in Aircraft and Spacecraft Science 3 3 331 349 2016
- Lin , D. , NI , R. , and Adams , R. Prediction and Measurement of the Vibrational Damping Parameters of Carbon and Glass Fibrereinforced Plastics Plates Journal of Composite Materials 18 2 132 152 1984
- Araújo , A.L. , Martins , P. , Mota Soares , C.M. , Mota Soares , C.A. , and Herskovits , J. Damping Optimization of Viscoelastic Laminated Sandwich Composite Structures Structural and Multidisciplinary Optimization 39 6 569 579 2009
- Madeira , J. , AraÞjo , A. , Soares , C.M. , Soares , C.M. , and Ferreira , A. Multiobjective Design of Viscoelastic Laminated Composite Sandwich Panels Composites Part B: Engineering 77 391 401 2015
- Luis , N.F. , Madeira , J. , AraÞjo , A. , and Ferreira , A. Active Vibration Attenuation in Viscoelastic Laminated Composite Panels Using Multiobjective Optimization Composites Part B: Engineering 128 53 66 2017
- Berthelot , J.-M. , Assarar , M. , Sefrani , Y. , and Mahi , A.E. Damping Analysis of Composite Materials and Structures Composite Structures 85 3 189 204 2008
- Adams , R.D. and Maheri , M.R. Damping in Advanced Polymer-Matrix Composites Journal of Alloys and Compounds 355 1-2 126 130 2003
- Marburg , S. and Nolte , B. Computational Acoustics of Noise Propagation in Fluids - Finite and Boundary Element Methods Berlin, Heidelberg Springer-Verlag 2008
- Klaerner , M. , Marburg , S. , and Kroll , L. Fe Based Measures for Structure Borne Sound Radiation Inter.Noise 2014: 43rd International Congress on Noise Control Engineering Melbourne, Australia 2014
- Koopmann , G.H. and Fahnline , J.B. Designing Quiet Structures London Academic Press 1997
- Fahnline , J. and Koopmann , G. A Lumped Parameter Model for the Acoustic Power Output from a Vibrating Structure Journal of the Acoustical Society of America 100 6 3539 3547 1996
- Fahnline , J. and Koopmann , G. Numerical Implementation of the Lumped Parameter Model for the Acoustic Power Output of a Vibrating Structure Journal of the Acoustical Society of America 102 1 179 192 1997
- Dassault Systemes 2014
- Klaerner , M. , Wuehrl , M. , Kroll , L. , and Marburg , S. Fea Based Sound Power Estimation with Non-Equidistant Frequency Steps Proceedings of the INTER-NOISE 2016, 45th International Congress and Exposition on Noise Control Engineering 2016 5447 5454
- Cortes , F. and Elejabarrieta , M.J. Forced Response of a Viscoelastically Damped Rod Using the Superposition of Modal Contribution Functions Journal of Sound and Vibration 315 1 58 64 2008
- Hambric , S.A. , Sung , S.H. , and Nefske , D.J. Engineering Vibroacoustic Analysis, Methods and Applications Wiley 2016
- Borgiotti , G. The Power Radiated by a Vibrating Body in an Acoustic Fluid and Its Determination from Boundary Measurements Journal of the Acoustical Society of America 88 4 1884 1893 1990
- Hesse , C. , Papantoni , V. , Algermissen , S. , and Monner , H. Frequency-Independent Radiation Modes of Interior Sound Radiation: Experimental Study and Global Active Control Journal of Sound and Vibration 401 204 213 2017
- Cunefare , K. The Minimum Multimodal Radiation Efficiency of Baffled Finite Beams Journal of the Acoustical Society of America 90 5 2521 2529 1991
- Cunefare , K. and Noelle Currey , M. On the Exterior Acoustic Radiation Modes of Structures Journal of the Acoustical Society of America 96 4 2302 2312 1994
- Photiadis , D. The Relationship of Singular Value Decomposition to Wave-Vector Filtering in Sound Radiation Problems Journal of the Acoustical Society of America 88 2 1152 1159 1990
- Hesse , C. , Perez , J.V. , and Sinapius , M. Frequency-Independent Radiation Modes of Interior Sound Radiation: An Analytical Study Journal of Sound and Vibration 392 31 40 2017
- Moheit , L. and Marburg , S. Infinite Elements and Their Influence on Normal and Radiation Modes in Exterior Acoustics Journal of Computational Acoustics 25 1650020 2017 10.1142/S0218396X1650020X
- Naghshineh , K. , Koopmann , G. , and Belegundu , A. Material Tailoring of Structures to Achieve a Minimum Radiation Condition Journal of the Acoustical Society of America 92 2 I 841 855 1992
- Elliott , S. and Johnson , M. Radiation Modes and the Active Control of Sound Power Journal of the Acoustical Society of America 94 4 2194 2204 1993
- Marburg , S. Developments in Structural-Acoustic Optimization for Passive Noise Control Archives of Computational Methods in Engineering 9 291 370 2002
- Zhang , Y. , Wu , H. , Jiang , W. , and Kessissoglou , N. Acoustic Topology Optimization of Sound Power Using Mapped Acoustic Radiation Modes Wave Motion 70 90 100 2017
- Ulke-Winter , L. and Kroll , L. Holistic Criteria-Based Optimization of Filament Wound High Pressure Vessels CIRP Journal of Manufacturing Science and Technology 18 173 178 2017