This content is not included in your SAE MOBILUS subscription, or you are not logged in.

An Experimental Study on the Effect of Stroke-to-Bore Ratio of Atkinson DISI Engines with Variable Valve Timing

Journal Article
2018-01-1419
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 03, 2018 by SAE International in United States
An Experimental Study on the Effect of Stroke-to-Bore Ratio of Atkinson DISI Engines with Variable Valve Timing
Sector:
Citation: Oh, S., Cho, S., Seol, E., Song, C. et al., "An Experimental Study on the Effect of Stroke-to-Bore Ratio of Atkinson DISI Engines with Variable Valve Timing," SAE Int. J. Engines 11(6):1183-1193, 2018, https://doi.org/10.4271/2018-01-1419.
Language: English

References

  1. Cairns , A. , Blaxill , H. , and Irlam , G. Exhaust Gas Recirculation for Improved Part and Full Load Fuel Economy in a Turbocharged Gasoline Engine SAE Technical Paper 2006-01-0047 2006 10.4271/2006-01-0047
  2. Tomita , M. , Aoyama , S. , Ushijima , K. , Tanaka , Y. et al. Compact and Long-Stroke Multiple-Link VCR Engine Mechanism SAE Technical Paper 2007-01-3991 2007 0.4271/2007-01-3991
  3. Flierl , R. , Gollasch , D. , Knecht , A. , and Hannibal , W. Improvements to a Four Cylinder Gasoline Engine through the Fully Variable Valve Lift and Timing System UniValve® SAE Technical Paper 2006-01-0223 2006 10.4271/2006-01-0223
  4. Song , J. and Sunwoo , M. An Experimental Study on Engine Performance with High Ignition Energy Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 216 6 505 512 2002 10.1243/09544070260137435
  5. Cho , S. , Kim , N. , Chung , J. , and Min , K. The Effect of Ethanol Injection Strategy on Knock Suppression of the Gasoline/Ethanol Dual Fuel Combustion in a Spark-Ignited Engine SAE Technical Paper 2015-01-0764 2015 10.4271/2015-01-0764
  6. Topinka , J.A. , Gerty , M.D. , Heywood , J.B. , and Keck , J.C. Knock Behavior of a Lean-Burn, H2 and CO Enhanced, SI Gasoline Engine Concept SAE Technical Paper 2004-01-0975 2004 10.4271/2004-01-0975
  7. Sellnau , M.C. , Sinnamon , J. , Hoyer , K. , and Husted , H. Full-Time Gasoline Direct-Injection Compression Ignition (GDCI) for High Efficiency and Low NOx and PM SAE International Journal of Engines 300 314 10.4271/2012-01-0384
  8. Song , H.H. and Edwards , C.F. Optimization of Recompression Reaction for Low-Load Operation of Residual-Effected HCCI SAE Technical Paper 2008-01-0016 2008 10.4271/2008-01-0016
  9. Filipi , Z.S. and Assanis , D.N. The Effect of the Stroke-to-Bore Ratio on Combustion, Heat Transfer and Efficiency of a Homogeneous Charge Spark Ignition Engine of Given Displacement International Journal of Engine Research 1 2 191 208 2000 10.1243/1468087001545137
  10. Ikeya , K. , Takazawa , M. , Yamada , T. , Park , S. et al. Thermal Efficiency Enhancement of a Gasoline Engine SAE International Journal of Engines 1579 1586 2015 10.4271/2015-01-1263
  11. Tsuchida , H. , Hiraya , K. , Tanaka , D. , Shigemoto , S. et al. The Effect of a Longer Stroke on Improving Fuel Economy of a Multiple-Link VCR Engine SAE Technical Paper 2007-01-4004 2007 10.4271/2007-01-4004
  12. Hoag , K.L. , Mangold , B. , Alger , T. , Abidin , Z. et al. A Study Isolating the Effect of Bore-to-Stroke Ratio on Gasoline Engine Combustion Chamber Development SAE International Journal of Engines 2022 2029 10.4271/2016-01-2177
  13. Li , T. , Gao , Y. , Wang , J. , and Chen , Z. The Miller Cycle Effects on Improvement of Fuel Economy in a Highly Boosted, High Compression Ratio, Direct-Injection Gasoline Engine: EIVC Vs. LIVC. Energy Conversion and Management Energy Conversion and Management 79 59 65 2014 10.1016/j.enconman.2013.12.022
  14. Zheng , B. , Yin , T. , and Li , T. Analysis of Thermal Efficiency Improvement of a Highly Boosted, High Compression Ratio, Direct-Injection Gasoline Engine with LIVC and EIVC at Partial and Full Loads SAE Technical Paper 2015-01-1882 2015 10.4271/2015-01-1882
  15. Luisi , S. , Doria , V. , Stroppiana , A. , Millo , F. et al. Experimental Investigation on Early and Late Intake Valve Closures for Knock Mitigation through Miller Cycle in a Downsized Turbocharged Engine SAE Technical Paper 2015-01-0760 2015 10.4271/2015-01-0760
  16. Söderberg , F. and Johansson , B. Fluid Flow, Combustion and Efficiency with Early or Late Inlet Valve Closing SAE Technical Paper 972937 1997 10.4271/972937
  17. Xu , H. Some Critical Technical Issues on the Steady Flow Testing of Cylinder Heads SAE Technical Paper 2001-01-1308 2001 10.4271/2001-01-1308

Cited By