This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Long Life Axial Fatigue Strength Models for Ferrous Powder Metals
Journal Article
2018-01-1395
ISSN: 1946-3979, e-ISSN: 1946-3987
Sector:
Topic:
Citation:
Savu, V. and Mourelatos, Z., "Long Life Axial Fatigue Strength Models for Ferrous Powder Metals," SAE Int. J. Mater. Manf. 11(4):467-479, 2018, https://doi.org/10.4271/2018-01-1395.
Language:
English
References
- MPIF Standard 35 Material Standards for PM Structural Parts Princeton, NJ MPIF 2016
- Cipolloni , G. , Menapace , C. , Cristofoloni , I. , and Molinari , A. A Quantitative Characterisation of Porosity in a Cr-Mn Sintered Steel Using Image Analysis Materials Characterisation 94 58 68 2017
- Danninger , H. , Jangg , G. , Weiss , B. , and Stickler , R. Microstructure and Mechanical Properties of Sintered Iron - Part I Powder Metallurgy International 25 3 111 117 1993
- Habibi , S.M. , Janghorban , K. , Khorsand , H. , and Yoozbashizade , H. The Effect of Microstructure on Mechanical Properties of Ferrous P/M Materials PM Auto’02 Isfahan, Iran April 21-25, 2002
- Danninger , H. , Jangg , G. , Weiss , B. , and Stickler , R. Microstructure and Mechanical Properties of Sintered Iron-Part II Powder Metallurgy International 25 4 170 173 1993
- Khorsand , H. , Habibi , S.M. , Yoozbashizade , H. , Janghorban , K. et al. Investigation of Microstructure and Fatigue Properties of Low Alloy Sintered Steels by Heat Treatment P/M Science & Technology Briefs 4 2 18 22 2002
- Segall , A.E. , Cimino , Y. , Murphy , T. , and Haberberger , T. The Influence of Microstructure and Carbide Particles on the Creep Behaviors of P/M Alloys PmZtec 2001, International Conference on Powder Metallurgy and Particulate Materials New Orleans, Louisiana May 13-17, 2001
- Liu , Z.Y. , Loh , N.H. , Khor , K.A. , and Tor , S.B. Microstructure Evolution during Sintering of Injection Molded M2 High Speed Steel Materials Science and Engineering 293 1 46 55 2000
- Davala , A.B. , Graham , A.H. , and Causton , R.J. Application of High Performance Materials and Processes-Alloy Systems Pm2tec ’98, International Conference on Powder Metallurgy and Particulate Materials Las Vegas, Nevada May 3 l-June 4, 1998
- Esper , E.J. and Sonsino , C.M. Fatigue Design for P/M Components The European Powder Metallurgy Association Shrewbury 1994
- Lindqvist , B. and Kanno , K. Considerations When Sintering Oxidation-Sensitive Pm Steels Introduction Pm2tec 2002, International Conference on Powder Metallurgy and Particulate Materials Orlando, Florida June 16-21, 2002
- Hadrboletz , A.A. and Weiss , B. Fatigue Behavior of Iron Based Sintered Material International Materials Review 42 1 1 44 1997
- Christian , K.D. and German , R.M. Relation between Pore Structure and Fatigue Behavior in Sintered Iron-Copper-Carbon International Journal of Powder Metallurgy 31 1 51 61 1995
- Khorsand , H. , Habibi , S.M. , Janghorban , K. , Toozbashizade , H. et al. Fatigue of Sintered Steels (Fe-1.5MO-3Mn-0.7C) Materials and Structures 37 335 341 2004
- Sonsino , C.M. Methods to Determine Relevant Material Properties for the Fatigue Design of Powder Metallurgy Parts Powder Metallurgy International 16 1 34 38 1984
- Lindqvist , B. , Kanno , K. , Takeda , Y. , Takahashi , S. et al. Sintering of Prealloy 3cr-0.5Mo Steel Powder in a Carbon/Carbon Composite Mesh Belt Furnace PmZtec2002, International Conference on Powder Metallurgy and Particulate Materials Orlando, Florida June 16-21, 2002
- Piotrowski , A. and Biallas , G. Influence of Sintering Temperature on Pore Morphology-Microstructure and Fatigue Behaviour of Mo-Cu Alloyed Sintered Steel Powder Metallurgy 41 2 109 114 1998
- Ledoux , L. and Prioul , C. Fatigue and Fracture of Porous Steels and Cu-Infiltrated Porous Steels Pm2Tec ’98, International Conference on Powder Metallurgy & Particulate Materials Las Vegas, Nevada May 31-June 4, 1998
- Sudhakar , K.V. Fatigue Behavior of High Density Powder Metallurgy Steel International Journal of Fatigue 22 729 734 2000
- Mousavinasab , S. and Blais , C. The Influence of Different Microstructural Constituents on the Fatigue Crack Propagation Behavior of a Nickel PM Steel International Journal of Fatigue 99 44 45 2017
- Straffelini , G. and Fontanari , V. Stress State Dependent Fracture Behavior of Porous PM Steels Engineering Fracture Mechanics 78 1067 1076 2011
- Straffelini , G. and Fontanari , V. Damage Evolution in Sinter-Hardening Powder-Metallurgy Steels during Tensile and Fatigue Loading Materials and Design 61 101 108 2014
- Deng , X. , Piotrowski , G. , Chawala , N. , and Narasimhan , K.S. Fatigue Crack Growth Behavior of Hybrid and Prealloyed Sintered Steels Part II. Fatigue Behavior Materials Science and Engineering 491 28 38 2008
- Haynes , R. Fatigue Behavior of Sintered Metals and Alloy Powder Metallurgy 13 26 465 510 1970
- Spoljaric , D. , Danninger , H. , Weiss , B. and Stickler , R. Fatigue Behavior of Mo-Alloyed Sintered Steels and Its Sequences for Application Proc. Pm’94 Paris 2 1994 827 832
- Manson , S.S. Thermal Stresses in Design Cyclic Life of Ductile Materials 1960 19 139 144
- Morrow , J.D. Cyclic Plastic Strain Energy and Fatigue of Metals. Internal Friction, Damping, and Cyclic Plasticity American Society for Testing and Materials Philadelphia, PA 1964 45 87
- Basquin O. H. The Exponential Law of Endurance Tests Proc. Annual Meeting, American Society for Testing Materials 1910 10 625 630
- Manson , S.S. Fatigue: A Complex Subject-Some Simple Approximations Experimental Mechanics Journal Society of Experimental Stress Analysis 1960
- Coffin , L.F. A Study of the Effects of Cyclic Thermal Stresses in Ductile Metals Trans ASME 76 931 950 1954
- Muralidharan , U. and Manson , S.S. Modified Universal Slopes Equation for Estimation of Fatigue Characteristics Journal of Engineering Materials and Technology 110 55 58 1988
- Baumel , A. Jr. and Seeger , T. Materials Data for Cyclic Loading-Supplement I Amsterdam Elsevier Science Publishers 1990
- Roessle , M.L. and Fatemi , A. Strain-Controlled Fatigue Properties of Steels and some Simple Approximations International Journal of Fatigue 22 495 511 2000
- Mitchell M.R. , Socie D.F. and Caulfield E.M. 1977 385 410
- Ong , J.H. An Evaluation of Existing Methods for the Prediction of Axial Fatigue Life from Tensile Data International Journal of Fatigue 5 1 1 13 19 1993
- Meggiolaro , M.A. and Castro , J.T.P. ViDa-A Visual Damage meter to Automate the Fatigue Design under Complex Loading Brazilian Journal of Mechanical Sciences, RBCM 20 4 666 685 1998
- Meggiolaro , M.A. and Castro , J.T.P. Statistical Evaluation of Strain-Life Fatigue Crack Initiation Predictions International Journal of Fatigue 23 436 476 2004
- Sobol , I.M. Global Sensitivity Indices for Nonlinear Mathematical Models and their Monte Carlo Estimates Mathematics and Computers in Simulation 55 271 280 2001
Cited By
Recommended Content
Technical Paper | Effect of Porosity on the Mechanical Properties of Sintered Nickel Steels |
Technical Paper | The Effect of Stress on the Properties of Electroless Nickel-Phosphorus Deposits |
Ground Vehicle Standard | Stainless Steel 17-7 PH Spring Wire and Springs |