This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Investigation on Dry-clutch Transmissibility Characteristic for Vehicle Launch Shudder
Technical Paper
2018-01-1225
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Vehicle launch shudder is the terminology used in automotive industry to describe severe longitudinal oscillation during clutch engagement under start-up condition. This paper presents and implements detailed investigation for dry-clutch engagement and disengagement process, in order to deeply analyze vehicle launch shudder phenomenon which seriously deteriorates ride comfort. Firstly, diaphragm spring and cushion spring and link strip, which are three elastic components related to dry-clutch engagement and disengagement process in axial direction, are studied for their elastic properties, respectively, to obtain relationship between load and deflection. The elastic properties of these three elastic components are taken into considerations to establish nonlinear relationship between release bearing travel and clutch clamp force. Then, based on multi-body system dynamics theory, the lumped mass method is used to model the powertrain of front-engine and front-wheel-drive vehicle equipped with manual transmission, six-degree-of-freedom powertrain torsional vibration model is used to simulate vehicle launch shudder phenomenon numerically, and the performance of vehicle launch is evaluated by shock extent and dissipated energy. The speed of release bearing travel is used to reflect different launch intentions: fast launch and normal launch and slow launch. Finally, by comparing evaluation parameters of these three launch modes, it can be known that the longer synchronous moment or release bearing travel time, the smaller shock extent, and the better launch performance, but dissipated energy is negatively correlated with shock extent. Through the research of this paper, the launch shudder during dry-clutch engagement process is analyzed, which can provide theoretical references for structural optimization and launch control strategy.
Authors
Citation
Yuan, R. and Wu, G., "Investigation on Dry-clutch Transmissibility Characteristic for Vehicle Launch Shudder," SAE Technical Paper 2018-01-1225, 2018, https://doi.org/10.4271/2018-01-1225.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 |
Also In
References
- Wu , G. and Luan , W. Self-excited Vibration of Driveline for Vehicle Launch Journal of Beijing Institute of Technology 22 3 330 336 2013
- Wu , G. and Luan , W. The Impact of Gear Meshing Nonlinearities on the Vehicle Launch Shudder SAE Int. J. Commer. Veh . 8 1 1 12 2015 10.4271/2015-01-0610
- Centea , D. , Rahnejat , H. , and Menday , M.T. Non-linear Multi-Body Dynamic Analysis for the Study of Clutch Torsional Vibrations (Judder) Applied Mathematical Modelling 25 3 177 192 2001
- Wellmann , T. and Govindswamy , K. Development of a Multi-Body Systems Approach for Analysis of Launch Shudder in Rear Wheel Driven Vehicles SAE Technical Paper 2009-01-2073 2009 10.4271/2009-01-2073
- Gregori , I.R.S. , Thomaz , C.E. , and Martins , C. G. Vehicle Power and Propulsion Conference, 2014 IEEE IEEE 2014
- Vasca , F. , Iannelli , L. , Senatore , A. , and Reale , G. Torque Transmissibility Assessment for Automotive Dry-clutch Engagement IEEE/ASME Transactions on Mechatronics 16 3 564 573 2011
- Pisaturo , M. , D'Auria , C. , and Senatore , A. American Control Conference (ACC), 2016, IEEE 2016
- Jin , S. , Wu , G. , and Wang , L. Analysis and Simulation on the Shudder Phenomena in Automatic Transmission Vehicles Automotive Engineering 35 8 701 705 2013
- Van Der Heijden , A.C. , Serrarens , A.F.A. , Camlibel , M.K. , and Nijmeijer , H. Hybrid Optimal Control of Dry Clutch Engagement International Journal of Control 80 11 1717 1728 2007
- Lucente , G. , Montanari , M. , and Rossi , C. Modelling of An Automated Mmanual Transmission System Mechatronics 17 2 73 91 2007
- Wang , Y. , Li , Y. , Li , N. , Sun , H. et al. Time-varying Friction Thermal Characteristics Research on a Dry Clutch Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 228 5 510 517 2014
- Almen , J.O. and Laszlo , A. The Uniform-section Disk Spring Transactions of American Society of Mechanical Engineers 58 4 305 314 1936
- Zhang , T. , Gao , X. , Xia , C. , and Zhu , M. A Study on Automobile Clutch Link Strip J Jiangsu Univ Sci Technol (Nat Sci) 22 6 26 29 2001