This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Design and Comparison of Cooling Plates for a Prismatic Lithium-ion Battery for Electrified Vehicles
Technical Paper
2018-01-1188
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
An effective thermal management of lithium-ion battery (LIB) packs for maintaining their operating temperature uniformly and in the manufacturers’ allowable range can increase the battery lifespan for electric and hybrid vehicles. For this purpose, two liquid cooling plates with different flow patterns are designed and compared for a commercial prismatic LIB with graphite anode and lithium iron phosphate (LiFePO4) cathode chemistry. The analysis of the cooling plates is accomplished through mathematical modeling and computer simulation. The cooling plates are designed to dissipate the maximum possible heat generation in the battery in normal operation, which is during the continuous discharge at 5C for the typical LIB under study. An experiment is conducted to determine the local heat flux from the battery during discharge at 5C from the state of charge of 0 to 100%. The cooling plates are studied for different flow rates to determine the optimum design parameters and achieving the minimum pressure drop and temperature gradient on the surface of the battery. Overall, this study provides new design of cooling plates for large prismatic LIBs for electric and hybrid electric vehicles, with the ability to dissipate heat and maintain the battery surface temperature less than 25°C.
Recommended Content
Authors
- Abdul Haq Mohammed - The University of Akron
- Muapper Alhadri - The University of Akron
- Waleed Zakri - The University of Akron
- Haniph Aliniagerdroudbari - The University of Akron
- Roja Esmaeeli - The University of Akron
- Seyed Reza Hashemi - The University of Akron
- Gopal Nadkarni - The University of Akron
- Siamak Farhad - The University of Akron
Citation
Mohammed, A., Alhadri, M., Zakri, W., Aliniagerdroudbari, H. et al., "Design and Comparison of Cooling Plates for a Prismatic Lithium-ion Battery for Electrified Vehicles," SAE Technical Paper 2018-01-1188, 2018, https://doi.org/10.4271/2018-01-1188.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
Unnamed Dataset 6 | ||
Unnamed Dataset 7 | ||
Unnamed Dataset 8 | ||
Unnamed Dataset 9 |
Also In
References
- Leng , F. , Tan , C.M. , and Pecht , M. Effect of Temperature on the Aging rate of Li Ion Battery Operating above Room Temperature Sci. Rep. 5 1 12 2015
- Bandhauer , T.M. , Garimella , S. , and Fuller , T.F. A Critical Review of Thermal Issues in Lithium-Ion Batteries J. Electrochem. Soc. 158 3 R1 2011
- Pesaran , A.A. Battery Thermal Models for Hybrid Vehicle Simulations J. Power Sources 110 2 377 382 2002
- Miranda , Á.G. and Hong , C.W. Integrated Modeling for the Cyclic Behavior of High Power Li-ion Batteries Under Extended Operating Conditions Appl. Energy 111 681 689 2013
- Ye , Y. , Shi , Y. , and Tay , A.A.O. Electro-thermal Cycle Life Model for Lithium Iron Phosphate battery J. Power Sources 217 509 518 2012
- Khan , M. , Swierczynski , M. , and Kær , S. Towards an Ultimate Battery Thermal Management System: A Review Batteries 3 1 9 2017
- Babapoor , A. , Azizi , M. , and Karimi , G. Thermal Management of a Li-ion Battery Using Carbon Fiber-PCM Composites Appl. Therm. Eng. 82 281 290 2015
- Al Hallaj , S. and Selman , J.R. A Novel Thermal Management System for Electric Vehicle Batteries Using Phase-Change Material J. Electrochem. Soc. 147 9 3231 2000
- Khateeb , S.A. , Amiruddin , S. , Farid , M. , Selman , J.R. , and Al-Hallaj , S. Thermal Management of Li-ion Battery with Phase Change Material for Electric Scooters: Experimental Validation J. Power Sources 142 1-2 345 353 2005
- Jin , L.W. , Lee , P.S. , Kong , X.X. , Fan , Y. , and Chou , S.K. Ultra-thin Minichannel LCP for EV Battery Thermal Management Appl. Energy 113 1786 1794 2014
- Haifeng , D. , Zechang , S. , Xuezhe , W. , and Shuqiang , Y. EVS28 Int. Electr. Veh. Symp. Exhib. 2015
- Tong , W. , Somasundaram , K. , Birgersson , E. , Mujumdar , A.S. , and Yap , C. Numerical Investigation of Water Cooling for a Lithium-ion Bipolar Battery Pack Int. J. Therm. Sci. 94 259 269 2015
- Jarrett , A. and Kim , I.Y. Influence of Operating Conditions on the Optimum Design of Electric Vehicle Battery Cooling Plates J. Power Sources 245 644 655 2014
- Lan , C. , Xu , J. , Qiao , Y. , and Ma , Y. Thermal Management for High Power Lithium-ion Battery by Minichannel Aluminum Tubes Appl. Therm. Eng. 101 284 292 2016
- Saw , L.H. , Ye , Y. , Tay , A.A.O. , Chong , W.T. et al. Computational Fluid Dynamic and Thermal Analysis of Lithium-ion Battery Pack with Air Cooling Appl. Energy 177 783 792 2016
- Chen , D. , Jiang , J. , Kim , G.H. , Yang , C. , and Pesaran , A. Comparison of Different Cooling Methods for Lithium Ion Battery Cells Appl. Therm. Eng. 94 846 854 2016
- Wang , Q. et al. Experimental Investigation on EV Battery Cooling and Heating by Heat Pipes Appl. Therm. Eng. 88 54 60 2014
- Wu , M.S. , Liu , K.H. , Wang , Y.Y. , and Wan , C.C. Heat Dissipation Design for Lithium-ion Batteries J. Power Sources 109 1 160 166 2002
- Zhao , R. , Gu , J. , and Liu , J. An Experimental Study of Heat Pipe Thermal Management System with Wet Cooling Method for Lithium Ion Batteries J. Power Sources 273 1089 1097 2015
- Xu , J. , Lan , C. , Qiao , Y. , and Ma , Y. Prevent Thermal Runaway of Lithium-ion Batteries with Minichannel Cooling Appl. Therm. Eng. 110 883 890 2017
- Rahman , M.M. , Rahman , H.Y. , Mahlia , T.M.I. , and Sheng , J.L.Y. Liquid Cooled Plate Heat Exchanger for Battery Cooling of an Electric Vehicle (EV) IOP Conf. Ser. Earth Environ. Sci. 32 1 2016
- D. Irvine , E. Foreman , and C. B. Remington Designing a Heat Sink for Lithium-ion Battery Packs in Electric Vehicles 2015
- Hashemi , S.R. , Montazeri , M. , and Nasiri , M. The Compensation of Actuator Delay for Hardware-in-the-loop Simulation of a Jet Engine Fuel Control Unit Simulation 90 6 745 755 2014
- Rahmani , B. and Hashemi , S.R. Internet-Based Control of FCU Hardware-in-the-loop Simulators Simul. Model. Pract. Theory 56 69 81 2015
- Nazari , A. and Farhad , S. Heat Generation in Lithium-ion batteries with Different Nominal Capacities and Chemistries Appl. Therm. Eng. 125 1501 1517 2017
- Samadani , E. , Gimenez , L. , Scott , W. , Farhad , S. et al. Thermal Behavior of Two Commercial Li-Ion Batteries for Plug-in Hybrid Electric Vehicles SAE Technical Paper 2014-01-1840 2014 10.4271/2014-01-1840