Open Access

Multi-Objective Optimization of Fuel Injection Pattern for a Light-Duty Diesel Engine through Numerical Simulation

Journal Article
2018-01-1124
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 03, 2018 by SAE International in United States
Multi-Objective Optimization of Fuel Injection Pattern for a Light-Duty Diesel Engine through Numerical Simulation
Sector:
Citation: Piano, A., Millo, F., Sapio, F., and Pesce, F., "Multi-Objective Optimization of Fuel Injection Pattern for a Light-Duty Diesel Engine through Numerical Simulation," SAE Int. J. Engines 11(6):1093-1107, 2018, https://doi.org/10.4271/2018-01-1124.
Language: English

References

  1. Sapio , F. , Piano , A. , Millo , F. , and Pesce , F. Digital Shaping and Optimization of Fuel Injection Pattern for a Common Rail Automotive Diesel Engine through Numerical Simulation SAE Technical Paper 2017-24-0025 2017 10.4271/2017-24-0025
  2. Corcione , F.E. , Vaglieco , B.M. , Corcione , G.E. , Lavorgna , M. et al. Study of the Combustion System of a New Small DI Diesel Engine with Advanced Common Rail Injection System SAE Technical Paper 2003-01-1782 2003 10.4271/2003-01-1782
  3. Corcione , F.E. , Vaglieco , B.M. , Corcione , G.E. , and Lavorgna , M. Potential of Multiple Injection Strategy for Low Emission Diesel Engines SAE Technical Paper 2002-01-1150 2002 10.4271/2002-01-1150
  4. Boggavarapu , P. and Singh , S. Computational Study of Injection Rate-Shaping for Emissions Control in Diesel Engines SAE Technical Paper 2011-26-0081 2011 10.4271/2011-26-0081
  5. Di Blasio , G. , Beatrice , C. , Belgiorno , G. , Pesce , F. et al. Functional Requirements to Exceed the 100 kW/l Milestone for High Power Density Automotive Diesel Engines SAE Int. J. Engines 10 5 2342 2353 2017 10.4271/2017-24-0072
  6. Vassallo , A. , Beatrice , C. , Di Blasio , G. , Belgiorno , G. et al. The Key Role of Advanced, Flexible Fuel Injection Systems to Match the Future CO 2 Targets in an Ultra-Light Mid-Size Diesel Engine SAE Technical Paper 2018-37-0005 2018 10.4271/2018-37-0005
  7. Diwakar , R. and Domenech-Llopis , V. Physics of Combustion Noise Reduction with Multiple Injections in a DI Diesel Engine - A Computational Study SAE Technical Paper 2017-01-0566 2017 10.4271/2017-01-0566
  8. Semakula , M. and Inambao , P.F. The Formation, Effects and Control of Oxides of Nitrogen in Diesel Engines Int. J. Appl. Eng. Res. 13 6 3200 3209 2018
  9. Thirouard , M. , Mendez , S. , Pacaud , P. , Chmielarczyk , V. et al. Potential to Improve Specific Power Using Very High Injection Pressure In HSDI Diesel Engines SAE Technical Paper 2009-01-1524 2009 10.4271/2009-01-1524
  10. Atzler , F. , Kastner , O. , Rotondi , R. , and Weigand , A. Multiple Injection and Rate Shaping Part 1: Emissions Reduction in Passenger Car Diesel Engines SAE Technical Paper 2009-24-0004 2009 10.4271/2009-24-0004
  11. Minami , T. , Takeuchi , K. , and Shimazaki , N. Reduction of Diesel Engine NOx Using Pilot Injection SAE Technical Paper 950611 1995 10.4271/950611
  12. Zhang , L. A Study of Pilot Injection in a DI Diesel Engine SAE Technical Paper 1999-01-3493 1999 10.4271/1999-01-3493
  13. Schommers , J. , Duvinage , F. , Stotz , M. , Peters , A. et al. Potential of Common Rail Injection System for Passenger Car DI Diesel Engines SAE Technical Paper 2000-01-0944 2000 10.4271/2000-01-0944
  14. Nehmer , D.A. and Reitz , R.D. Measurement of the Effect of Injection Rate and Split Injections on Diesel Engine Soot and NOx Emissions SAE Technical Paper 940668 1994 10.4271/940668
  15. Badami , M. , Mallamo , F. , Millo , F. , and Rossi , E.E. Influence of Multiple Injection Strategies on Emissions, Combustion Noise and BSFC of a DI Common Rail Diesel Engine SAE Technical Paper 2002-01-0503 2002 10.4271/2002-01-0503
  16. Ricaud , J.C. and Lavoisier , F. Optimizing the Multiple Injection Settings on an HSDI Diesel Engine Thermo- and Fluid Dynamic Processes in Diesel Engines 2: Selected Papers from the THIESEL 2002 Conference Valencia, Spain September 11-13, 2002 2004 199 234 10.1007/978-3-662-10502-3_11
  17. Zhao , H. Advanced Direct Injection Combustion Engine Technologies and Development-Diesel Engines Woodhead Publishing 2010 9781439824757
  18. Mallamo , F. , Badami , M. , and Millo , F. Application of the Design of Experiments and Objective Functions for the Optimization of Multiple Injection Strategies for Low Emissions in CR Diesel Engines SAE Technical Paper 2004-01-0123 2004 10.4271/2004-01-0123
  19. Montgomery , D.T. and Reitz , R.D. Optimization of Heavy-Duty Diesel Engine Operating Parameters Using A Response Surface Method SAE Technical Paper 2000-01-1962 2000 10.4271/2000-01-1962
  20. Thiel , M.P. , Klingbeil , A.E. , and Reitz , R.D. Experimental Optimization of a Heavy-Duty Diesel Engine Using Automated Genetic Algorithms SAE Technical Paper 2002-01-0960 2002 10.4271/2002-01-0960
  21. Shi , Y. and Reitz , R.D. Optimization Study of the Effects of Bowl Geometry, Spray Targeting, and Swirl Ratio for a Heavy-Duty Diesel Engine Operated at Low and High Load Int. J. Engine Res. 9 4 325 346 2008 10.1243/14680874JER00808
  22. Hiroyasu , H. , Miao , H. , Hiroyasu , T. , Miki , M. et al. Genetic Algorithms Optimization of Diesel Engine Emissions and Fuel Efficiency with Air Swirl, EGR, Injection Timing and Multiple Injections SAE Technical Paper 2003-01-1853 2003 10.4271/2003-01-1853
  23. Piano , A. , Millo , F. , Postrioti , L. , Biscontini , G. et al. Numerical and Experimental Assessment of a Solenoid Common-Rail Injector Operation with Advanced Injection Strategies SAE Int. J. Engines 9 1 565 575 2016 10.4271/2016-01-0563
  24. Piano , A. , Boccardo , G. , Millo , F. , Cavicchi , A. et al. Experimental and Numerical Assessment of Multi-Event Injection Strategies in a Solenoid Common-Rail Injector SAE Int. J. Engines 10 4 2129 2140 2017 10.4271/2017-24-0012
  25. Piano , A. , Millo , F. , Boccardo , G. , Rafigh , M. et al. Assessment of the Predictive Capabilities of a Combustion Model for a Modern Common Rail Automotive Diesel Engine SAE Technical Paper 2016-01-0547 2016 10.4271/2016-01-0547
  26. Millo , F. , Boccardo , G. , Piano , A. , Arnone , L. et al. Numerical simulation of the combustion process of a high EGR, high injection pressure, heavy duty diesel engine SAE Technical Paper 2017-24-0009 2017 10.4271/2017-24-0009
  27. GT-Suite
  28. Russell , M.F. and Haworth , R. Combustion Noise from High Speed Direct Injection Diesel Engines SAE Technical Paper 850973 1985 10.4271/850973
  29. Russell , M.F. Diesel Engine Noise: Control at Source SAE Technical Paper 820238 1982 10.4271/820238
  30. Mallamo , F. , Badami , M. , and Millo , F. Analysis of Multiple Injection Strategies for the Reduction of Emissions, Noise and BSFC of a DI CR Small Displacement Non-Road Diesel Engine SAE Technical Paper 2002-01-2672 2002 10.4271/2002-01-2672
  31. Castorina , F. 2005
  32. AVL 1986
  33. GT-Suite
  34. Mallamo , F. , Longhi , S. , Millo , F. , and Rolando , L. Modeling of Diesel Oxidation Catalysts for Calibration and Control Purpose Int. J. Engine Res. 15 8 965 979 2014 10.1177/1468087413492526
  35. Mallamo , F. , Millo , F. , and Rolando , L. Model-Based Development and Calibration of Last Generation Diesel Powertrains for Passenger Cars Int. J. Powertrains 3 1 52 74 2014 10.1504/IJPT.2014.059415
  36. Montgomery , D.T. and Reitz , R.D. Effects of Multiple Injections and Flexible Control of Boost and EGR on Emissions and Fuel Consumption of a Heavy-Duty Diesel Engine SAE Technical Paper 2001-01-0195 2001 10.4271/2001-01-0195
  37. Desantes , J.M. , López , J.J. , García , J.M. , and Hernández , L. Application of Neural Networks for Prediction and Optimization of Exhaust Emissions in a H.D. Diesel Engine SAE Technical Paper 2002-02-1144 2002 10.4271/2002-01-1144
  38. Deb , K. and Jain , H. An Evolutionary Many-Objective Optimization Algorithm Using Reference-Point-Based Nondominated Sorting Approach, Part I: Solving Problems with Box Constraints IEEE Trans. Evol. Comput. 18 4 577 601 2014 10.1109/TEVC.2013.2281535
  39. Brownlee , J. Clever Algorithms: Nature-Inspired Programming Recipes First Lulu.com 2011 1446785068, 9781446785065
  40. Senecal , P.K. , Montgomery , D.T. , and Reitz , R.D. A Methodology for Engine Design Using Multi-Dimensional Modelling and Genetic Algorithms with Validation through Experiments Int. J. Engine Res. 1 3 229 248 2000 10.1243/1468087001545155

Cited By