This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Concurrent Optimization of Ply Orientation and Thickness for Carbon Fiber Reinforced Plastic (CFRP) Laminated Engine Hood
Technical Paper
2018-01-1121
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Carbon fiber reinforced plastic (CFRP) composites have gained particular interests due to their high specific modulus, high strength, lightweight and resistance to environment. In the automotive industry, numerous studies have been ongoing to replace the metal components with CFRP for the purpose of weight saving. One of the significant benefits of CFRP laminates is the ability of tailoring fiber orientation and ply thickness to meet the acceptable level of structural performance with little waste of material capability. This study focused on the concurrent optimization of ply orientation and thickness for CFRP laminated engine hood, which was based on the gradient-based discrete material and thickness optimization (DMTO) method. Two manufactural constraints, namely contiguity and intermediate void constraints, were taken into account in the optimization problem to reduce the potential risk of cracking matrix of CFRP. The design objective was the minimization of the mass of the CFRP hood subject to stiffness and eigenfrequency constraints under multiple load cases. To predict the pedestrian safety performance of the CFRP hood, the simulation of pedestrian head impact on the CFRP hood was carried out in terms of national standard of China. A prototype of the CFRP hood was fabricated by vacuum assisted resin transfer molding (VARTM), and the experimental tests were then conducted to validate the numerical results of the optimum design. The results demonstrated that the framework of the concurrent optimization of the CFRP hood and the numerical analysis of pedestrian safety offers a pragmatic procedure for the achievement of lightweight design with CFRP materials.
Recommended Content
Authors
Topic
Citation
Gao, Y., Gao, Y., Qian, R., Xu, Y. et al., "Concurrent Optimization of Ply Orientation and Thickness for Carbon Fiber Reinforced Plastic (CFRP) Laminated Engine Hood," SAE Technical Paper 2018-01-1121, 2018, https://doi.org/10.4271/2018-01-1121.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 |
Also In
References
- Bhosale , S.H. , Sahu , A.K. , Kangde , S. , and Londhe , A. no. 2017 10.4271/2017-01-5005
- Calvo , P.R. no. 2013 10.4271/2013-01-0970
- Carello , M. , Airale , A.G. , and Ferraris , A. no. 2014 10.4271/2014-01-1050
- Falzon , B. and Tan , W. Predicting Impact Damage, Residual Strength and Crashworthiness of Composite Structures SAE International Journal of Materials and Manufacturing 9 3 2016 10.4271/2016-01-0497
- Ghiasi , H. , Fayazbakhsh , K. , Pasini , D. , and Lessard , L. Optimum stacking sequence design of composite materials Part II: Variable stiffness design Composite Structures 93 1 1 13 2010 10.1016/j.compstruct.2010.06.001
- Ghiasi , H. , Pasini , D. , and Lessard , L. Optimum stacking sequence design of composite materials Part I: Constant stiffness design Composite Structures 90 1 1 11 2009 10.1016/j.compstruct.2009.01.006
- Goering , J. and Bayraktar , H. no. 2016 10.4271/2016-01-0530
- Gur , Y. and Wagner , D. Damping properties and NVH Modal Analysis Results of Carbon Fiber Composite Vehicle Components SAE International Journal of Materials and Manufacturing 10 2 2017 10.4271/2017-01-0500
- Jambor , Eric , and Thomas Bradley 2016 10.4271/2016-01-1254
- Lee , J.-M. , Lee , K.-H. , Kim , B.-M. , and Ko , D.-C. Design of Roof Panel with Required Bending Stiffness using CFRP Laminates International Journal of Precision Engineering and Manufacturing 17 4 479 485 2016 10.1007/s12541-016-0060-6
- McDonald , Martin , Peter Joyce , and Leonard Hamilton 2011 10.4271/2011-01-1262
- Park , Chung-Kyu , Cing-Dao Kan , Steven Reagan , Balachandra Deshpande , and Pradeep Mohan 2012 Crashworthiness and Numerical Analysis of Composite Inserts in Vehicle Structure SAE International Journal of Passenger Cars - Mechanical Systems 5 2 727 736 10.4271/2012-01-0049
- Sørensen , S.N. , Sørensen , R. , and Lund , E. DMTO - a method for Discrete Material and Thickness Optimization of laminated composite structures Structural and Multidisciplinary Optimization 50 1 25 47 2014 10.1007/s00158-014-1047-5
- Wang , F. , Lazarov , B.S. , and Sigmund , O. On projection methods, convergence and robust formulations in topology optimization Structural and Multidisciplinary Optimization 43 6 767 784 2011
- Wu , C. , Gao , Y. , Fang , J. , Lund , E. , and Li , Q. Discrete topology optimization of ply orientation for a carbon fiber reinforced plastic (CFRP) laminate vehicle door Materials & Design no. 128 9 19 2017 10.1016/j.matdes.2017.04.089