This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Modeling of Tire-Wet Surface Interaction Using Finite Element Analysis and Smoothed-Particle Hydrodynamics Techniques
Technical Paper
2018-01-1118
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
This paper focuses on predicting the rolling resistance and hydroplaning of a wide base truck tire (Size: 445/50R22.5) on dry and wet surfaces. The rolling resistance and hydroplaning are predicted at various inflation pressures, loads, velocities, and water depths. The wide base truck tire was previously modeled and validated using Finite Element Analysis (FEA) technique in virtual performance software (Pam-Crash). The water is modeled using Smoothed-Particle Hydrodynamics (SPH) method and Murnaghan equation of state. A water layer is first built on top of an FEA rigid surface to represent a wet surface. The truck tire is then inflated to the desired pressure. A vertical load is then applied to the center of the tire. For rolling resistance tests variable constant longitudinal speeds are applied to the center of the tire. The forces in the vertical and longitudinal directions are computed, and the rolling resistance is calculated. The effect of the longitudinal speed on rolling resistance on the wet surface also includes the prediction of the hydroplaning speed. The results are analyzed, and the effect of each parameter is investigated.
Recommended Content
Technical Paper | Vehicle Modeling and Service Loads Analysis |
Technical Paper | Simulation, Duplication, and Synthesis of Fatigue Load Histories |
Authors
Citation
El-Sayegh, Z., El-Gindy, M., Johansson, I., and Oijer, F., "Modeling of Tire-Wet Surface Interaction Using Finite Element Analysis and Smoothed-Particle Hydrodynamics Techniques," SAE Technical Paper 2018-01-1118, 2018, https://doi.org/10.4271/2018-01-1118.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 |
Also In
References
- Hall , D.E. and Cal Moreland , J. Fundamentals of Rolling Resistance Rubber Chemistry and Technology 74 3 525 539 2001
- Schuring , D.J. and Red_eld , J.S. Effect of Tire Rolling Loss on Fuel Consumption of Trucks SAE paper 821267 4086 4096 1982
- Clark , J. D. , and D. J. Schuring 1988 78 95
- SCHMIDT , B. MIRIAM: models for rolling resistance in road infrastructure asset management systems ARRB Conference, 24TH AUSTRALIA MELBOURNE, VICTORIA 2010 2010
- Karlsson , Robert , Annelie Carlson , and Ellen Dolk Energy Use Generated by Traffic and Pavement Maintenance: Decision Support for Optimization of Low Rolling Resistance Maintenance Treatments 2012
- Popov , A.A. , Cole , D.J. , Winkler , C.B. , and Cebon , D. Laboratory Measurement of Rolling Resistance in Truck Tyres under Dynamic Vertical Load Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 217 12 1071 1079 2003
- Sandberg , U. S. I 1990 460 479
- Descornet , G 1990 401
- Segel , L. and Lu , X.-P. Vehicular Resistance to Motion as Influenced by Road Roughness and Highway Alignment J. Aust. Road Res. Board 12 4 211 222 1982
- Lu , X.-P. Linko¨ping 1985 342 352
- Ejsmont , J. , Taryma , S. , Ronowski , G. , and Świeczko-Żurek , B. 2015
- Ejsmont , J. and Świeczko-Żurek , B. Methods of Tire Rolling Resistance Measurements Presented at COTUME (Troisième Congrès Tunisien de Mécanique) Sousse Tunisia 2014
- Ejsmont , J. , Sjögren , L. , Świeczko-Żurek , B. , and Ronowski , G. Influence of Road Wetness on Tire-Pavement Rolling Resistance Journal of Civil Engineering and Architecture 9 11 96 2015
- Song , Tae-Sok , Ju-Wan Lee SAE Technical Paper 1998
- Sovran, Gino, and Dwight Blaser. A contribution to understanding automotive fuel economy and its limits SAE Technical Paper 2003
- Jorro, Steven, Keith Thompson, and Andrew Smith. Truck Interior Noise Correlation using the SAE Road Load Method in the Commissioning of the EAR™ Acoustic Technology Center SAE Technical Paper 2009
- Jorro, Steven, Keith Thompson, and Andrew Smith. Truck Interior Noise Correlation using the SAE Road Load Method in the Commissioning of the EAR™ Acoustic Technology Center SAE Technical Paper 2009
- Grover , Parmeet S. SAE Technical Paper 1999
- Über eine neue Methode zur Lösung gewisser Variationsprobleme der mathematischen Physik Journal für die reine und angewandte Mathematik 135 1909 1 61
- Chae , S. Nonlinear Finite Element Modeling and Analysis of a Truck Tire PhD diss The Pennsylvania State University 2006
- Slade , J.L. Masc Diss., the Pennsylvania State University 2009
- Technology 2016
- Technology 2013
- Bui , Ha H. , Ryoichi Fukagawa , Kazunari Sako , and Shintaro Ohno 2008 1537 1570
- El-Sayegh , Z. , El-Gindy , M. , Johansson , I. , and Öijer , F. J. Vehicle Systems Modelling and Testing
- Jhung , M.-J. , Jo , J.-C. , and Jeong , S.-J. Impact Analysis of a Water Storage Tank Nuclear Engineering and Technology 38 7 681 688 2006
- El-Sayegh , Z. and El-Gindy , M. 2017 143 161