This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Investigation of the Influence of Different Asperity Contact Models on the Elastohydrodynamic Analysis of a Conrod Small-End/Piston Pin Coupling

Journal Article
2018-01-0836
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 03, 2018 by SAE International in United States
Investigation of the Influence of Different Asperity Contact Models on the Elastohydrodynamic Analysis of a Conrod Small-End/Piston Pin Coupling
Sector:
Citation: Ferretti, A., Giacopini, M., Mastrandrea, L., and Dini, D., "Investigation of the Influence of Different Asperity Contact Models on the Elastohydrodynamic Analysis of a Conrod Small-End/Piston Pin Coupling," SAE Int. J. Engines 11(6):919-934, 2018, https://doi.org/10.4271/2018-01-0836.
Language: English

References

  1. Andersson , B.S. Company’s Perspective in Vehicle Tribology Tribology Series 18 503 506 1991 10.1016/S0167-8922(08)70168-8
  2. Baker , C.E. , Theodossiades , S. , Rahnejat , H. , and Fitzsimons , B. Influence of In-Plane Dynamics of Thin Compression Rings on Friction in Internal Combustion Engines Journal of Engineering for Gas Turbines and Power 134 9 2012 10.1115/1.4006690
  3. Ba , L. , He , Z. , Liu , Y.-H. , and Zhang , G.-C. Analysis of Piston-Pin Lubrication Considering the Effects of Structure Deformation and Cavitation Journal of Zhejiang University: Science A 16 6 443 463 2015 10.1631/jzus.A1400105
  4. Zhang , C. , Cheng , H.S. , Qiu , L. , Knipstein , K.W. et al. Scuffing Behaviour of Piston-Pin/Bore Bearing in Mixed Lubrication-Part I: Experimental Studies Tribology Transactions 46 2 193 199 2003 10.1080/10402000308982616
  5. Zhang , C. , Cheng , H.S. , Qiu , L. , Knipstein , K.W. et al. Scuffing Behaviour of Piston-Pin/Bore Bearing in Mixed Lubrication-Part II: Scuffing Mechanism and Failure Criterion Tribology Transactions 47 1 149 156 2004 10.1080/05698190490279100
  6. Marmorini , L. , Baldini , A. , Bertocchi , E. , Giacopini , M. et al. On the Loosening Mechanism of a Bush Press-Fitted in the Small End of a Connecting Rod Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 226 3 312 324 2012 10.1177/0954407011417498
  7. Suhara , T. , Ato , S. , Takiguchi , M. , and Furuhama , S. Friction and Lubrication Characteristics of Piston Pin Boss Bearings of an Automotive Engine SAE Technical Paper 970840 1997 10.4271/970840
  8. Takiguchi , M. , Nagasawa , K. , and Suhara , T. Friction and Lubrication Characteristics of Small End Connecting Rod Bearing of an Automotive Engine 18th Annual Fall Technical Conference of the ASME Internal Combustion Engine Division, Part 2 Fairborn, OH 1996 1 6
  9. Antoni , N. , Nguyen , Q.S. , Ligier , J.L. , Saffré , P. et al. On the Cumulative Microslip Phenomenon Eur. J. Mechanics - A/Solids 26 4 626 646 2007 10.1016/j.euromechsol.2006.09.004
  10. Aitken , M.B. and McCallion , H. Elastohydrodinamic Lubrication of Big-End Bearings, Part 1: Theory Proc. IMechE, Part C: J. Mech. Eng. Sci. 205 99 106 1991 10.1243/PIME_PROC_1991_205_097_02
  11. Fantino , B. , Frêne , J. , and du Parquet , J. Elastic Connecting-Rod Bearing with a Piezoviscous Lubricant: Analysis of the Steady-State Characteristics J. Lubr. Tech. 101 2 190 197 1979 10.1115/1.3453316
  12. Giacopini , M. , Bertocchi , L. , Baldini , A. and Dini , D. A Complementarity Formulation for the EHL Analysis of a Conecting Rod Big End Bearing 5th WTC Torino, Italy Sept. 8-13 2013
  13. Dini , D. , Mastrandrea , L.N. , Giacopini , M. , and Bertocchi , E. Numerical Investigation of the Cavitation Damage in a High Performance Engine Conrod Big End Bearing via a Mass-Conserving Complementarity Algorithm Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2014 Lake Buena Vista, FL May 18-22 2014
  14. Wang , D. , Mian , O. , Merritt , D. , and Zhu , G. Elasto-Hydrodinamic Lubrication Analysis and Wear Predction of Connecting Rod Small-End Bush Piston Pin Interface SAE Technical Paper 2008-36-0068 2008 10.4271/2008-36-0068
  15. Ligier , J. and Ragot Small End Conrod Lubrication SAE Technical Paper 2006-01-1101 2006 10.4271/2006-01-1101
  16. Spuria , M. , Bonneau , D. Le Baratoux , Y. and , Molari , G. A Dynamic Model for an Internal Combustion Engine Full-Floating Piston Pin in Lubricated Conditions XVII Congresso dell’Associazione Italiana di Meccanica Teorica e Applicata Firenze Sept. 11-15 2015
  17. Bonneau , D. and Optasanu , V. Finite Element Mass-Conserving Cavitation Algorithm in Pure Squeeze Motion. Validation/Application to a Connecting-Rod Small End Bearing Journal of Tribology 122 1 162 169 2000 10.1115/1.555339
  18. Bertocchi , L. , Giacopini , M. , and Dini , D. Analysis of the Lubrication Regimes at the Small End and Big End of a Connecting Rod of a High Performance Motorbike Engine Proceedings of the ASME/STLE 2012 International Joint Tribology Conference Denver, CO Oct. 7-10 2012 10.1115/IJTC2012-61087
  19. Clark , K. , Antonevich , J. , Kemppainen , D. , and Barna , G. Piston Pin Dynamics and Temperature in a CI Engine SAE Int. J. Engines 2 1 91 105 2009 10.4271/2009-01-0189
  20. Ligier , J.L. and Ragot Piston Pin: Wear and Rotating Motion SAE Technical Paper 2005-01-1651 2005 10.4271/2005-01-1651
  21. Mastrandrea , L. , Giacopini , M. , Dini , D. , and Bertocchi , E. Elastohydrodynamic Analysis of the Conrod Small-End of a High Performance Motorbike Engine via a Mass Conserving Cavitation Algorithm ASME International Mechanical Engineering Congress and Exposition 15 2015 10.1115/IMECE2015-51603
  22. Bertocchi , L. , Giacopini , M. , Dini , D. , Fowell , M. et al. A Mass-Conserving Complementarity Formulation to Study Fluid Film Lubrication in the Presence of Cavitation for Non-Newtonian and Compressible Fluids ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012 2012 10.1115/ESDA2012-82885
  23. Giacopini , M. , Dini , D. , Fowell , M. , and Strozzi , A. A Mass-Conserving Complementarity Formulation to Study Lubricant Films in the Presence of Cavitation Journal of Tribology 132 4 2010 10.1115/1.4002215
  24. Greenwood , J.A. and Williamson , J.B. Contact of Nominally Flat Surfaces Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 295 1442 300 319 1966 10.1098/rspa.1966.0242
  25. Greenwood , J.A. and Tripp , J.H. The Contact of Two Rough Nominally Flat Rough Surfaces Proc. Instn. Mech. Eng. 185 625 633 1970
  26. Ma , M.-T. and Loibnegger , B. Simulation of EHD Lubrication of Common-Pin Conrod Big End Bearings in High Speed IC Engines Proceedings of WTC2005, World Tribology Congress III Washington, DC Sept. 12-16 2005
  27. Offner , G. and Knaus , O. A Generic Friction Model for Radial Slider Bearing Simulation Considering Elastic and Plastic Deformation Lubricants 3 522 538 2015 10.3390/lubricants3030522
  28. Wei , L. and Wei , H. An EHD-Mixed Lubrication Analysis of Main Bearings for Diesel Engine Based on Coupling between Flexible Whole Engine Block and Crankshaft Industrial Lubrication and Tribology 67 2 150 158 2015
  29. Zhenpeng , H. , Junhong , Z. , Guichang , Z. , Zhouyu , L. et al. Crankshaft-Bearing Evolution Indexes Investigation and Asperity Contact Identification Based on Neural Network Applied Mathematical Modelling 38 506 523 2014
  30. Karimaei , H. and Chamani , H. Study of Cavitation and Wear Damages in Conrod Big End Bearing of a Heavy Duty Diesel Engine by Using Elasto-Hydrodynamic Method Proceedings of the ASME Internal Combustion Engine Division 2009 Fall Technical Conference Lucerne, Switzerland Sept. 27-30 2009
  31. Hu , Y. , Cheng , H.S. , Arai , T. , Kobayashi , Y. et al. Numerical Simulation of Piston Ring in Mixed Lubrication - A Nonaxisymmetrical Analysis Journal of Tribology 116 3 470 478 1994 10.1115/1.2928867
  32. Giacopini , M. , Sissa , S. , Rosi , R. , and Fantoni , S. Influence of Different Temperature Distributions on the Fatigue Life of a Motorcycle Piston Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 229 1276 1288 10.1177/0954407014560201
  33. Craig , R. and Bampton , M. Coupling of Substructures for Dynamic Analyses AIAA Journal, American Institute of Aeronautics and Astronautics 6 7 1313 1319 1968
  34. Elrod , H.G. A Cavitation Algorithm ASME J. Lubr. Technol. 103 3 350 354 1981
  35. Jakobsson , B. and Floberg , L. The Finite Journal Bearing Considering Vaporization Goteborg, Sweden Transactions of Chalmers University of Technology 1957 190
  36. Olsson , K.O. Cavitation in Dynamically Loaded Bearings Goteborg, Sweden Transactions of Chalmers University of Technology 1965 308

Cited By