This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Lattice Brake Disc Instability Analysis Using Transient Complex Eigenvalue Method in Terms of Excitation Applied to the Pad
Technical Paper
2018-01-0091
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
This paper describes an integrated approach to the analysis of brake squeal with newly lattice brake disc design. The procedure adopted to define the lattice properties by considering the periodicity cell of lattice plates, present equations of motion and modes response of a periodic lattice disc in principal coordinates on the rotating disc which excited by distributed axial load. The non-linear contact problem is carried out based on a typical passenger car brake for vanned and lattice brake disc types as it undergoes a partial simulation of the SAE J2521 drag braking noise test. The experimental modal analysis (EMA) with impact hammer test is used to obtain the brake rotor modal properties and validated finite element Free- Free State and stability analysis. The fugitive nature of brake squeal is analyzed through the complex eigenvalue extraction technique to define dynamic instability. The likelihood of squeal noise occurrence is quantified by the definition of a single indicator derived from the system eigenvalues. The lattice type brake disc indicated lower propensity to squeal with leading to the standard deviation (SD) of the instability measurement and indicated that it is more reliable at low squeal frequencies.
Authors
Topic
Citation
KARAMOOZIAN, A., Tan, C., and Wang, l., "Lattice Brake Disc Instability Analysis Using Transient Complex Eigenvalue Method in Terms of Excitation Applied to the Pad," SAE Technical Paper 2018-01-0091, 2018, https://doi.org/10.4271/2018-01-0091.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
Unnamed Dataset 6 |
Also In
References
- Wadley , H.N.G. Multifunctional Periodic Cellular Metals Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 364 31 68 2006 10.1098/rsta.2005.1697
- Karamoozian AR , Tan CA and Wang L 2017
- Joo JH , Kang K , Kim T et al. 5658 5662 2011
- Feng , S. , Li , M. , Joo , J. et al. Thermomechanical Properties of Brazed Wire-Woven Bulk Kagome Cellular Metals for Multifunctional Applications Journal of Thermophysics and Heat Transfer 26 66 74 2012
- Kang , B. and Tan , C.A. Parametric Instability of a Leipholz Beam Due to Distributed Frictional Axial Load International Journal of Mechanical Sciences 46 807 825 2004 10.1016/j.ijmecsci.2004.06.005
- Kang , B. and Tan , C.A. Parametric Instability of a Leipholz Column Under Periodic Excitation Journal of Sound and Vibration 229 1097 1113 2000 10.1006/jsvi.1999.2597
- Ibrahim , R.A. Friction-Induced Vibration, Chatter, Squeal, and Chaos-Part I: Mechanics of Contact and Friction Applied Mechanics Reviews 47 209 226 1994 10.1115/1.3111079
- Ioannidis , P. , Barton , D.C. , and Brooks , P.C. Noise and Vibration Characterisation of Cast Iron and Siliconised Carbon Composite Brake Rotors SAE Technical Paper 2005-01-2313 2005 10.4271/2005-01-2313
- Ripin M and Bin Z 1995
- Nishlwakl , M. , Harada , H. , Okamura , H. et al. Study on Disc Brake Squeal SAE Technical Paper 890864 1989 10.4271/890864
- He , J. and Fu , Z.-F. Modal analysis Oxford; Boston Butterworth-Heinemann 2001
- Bruel and kjaer Instruction Manual: Impact Hammer Types 8202 Denmark Bruel & Kjaer 1998
- Ibrahim , R.A. , Madhavan , S. , Qiao , S.L. et al. Experimental Investigation of Friction-Induced Noise in Disc Brake Systems International Journal of Vehicle Design 23 218 240 2000 10.1504/ijvd.2000.001893
- Liles , G.D. Analysis of Disc Brake Squeal Using Finite Element Methods SAE Technical Paper 891150 1989 10.4271/891150
- Bajer , A. , Belsky , V. , and Zeng , L.J. Combining a Nonlinear Static Analysis and Complex Eigenvalue Extraction in Brake Squeal Simulation SAE Technical Paper 2003-01-3349 2003 10.4271/2003-01-3349
- Lee , Y.S. , Brooks , P.C. , Barton , D.C. et al. A Predictive Tool to Evaluate Disc Brake Squeal Propensity. Part 1: The Model Philosophy and the Contact Problem International Journal of Vehicle Design 31 289 308 2003 10.1504/ijvd.2003.003360
- Lü , H. and Yu , D. Brake Squeal Reduction of Vehicle Disc Brake System with Interval Parameters by Uncertain Optimization Journal of Sound and Vibration 333 7313 7325 2014 10.1016/j.jsv.2014.08.027
- Karamoozian , A. , Tan , C.A. , Wang , L. et al. Mechanics Based Design of Structures and Machines 2017 10.1080/15397734.2017.1362984
- Bakar , A.R.A. , Ouyang , H. , James , S. et al. Finite Element Analysis of Wear and Its Effect on Squeal Generation Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 222 1153 1165 2008 10.1243/09544070JAUTO536
- Zhu , B. , Barton , D. , and Brooks , P. Effects of Thermal Deformations on the Squeal Propensity of a Simple Automotive Disc Brake System SAE Technical Paper 2008-01-2532 2008 https://doi.org/10.4271/2008-01-2532
- Monteil , M. , Besset , S. , and Sinou , J.J. A Double Modal Synthesis Approach for Brake Squeal Prediction Mechanical Systems and Signal Processing 70-71 1073 1084 2016 10.1016/j.ymssp.2015.07.023
- Nobari , A. , Ouyang , H. , and Bannister , P. Uncertainty Quantification of Squeal Instability Via Surrogate Modelling Mechanical Systems and Signal Processing 60-61 887 908 2015 10.1016/j.ymssp.2015.01.022
- Koetniyom , S. , Brooks , P.C. , and Barton , D.C. The Development of a Material Model for Cast Iron That Can Be Used for Brake System Analysis Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 216 349 362 2002 10.1243/0954407021529165
- McKinlay AJ 2007
- Davis J. 1995
- Dunlap , K.B. , Riehle , M.A. , and Longhouse , R.E. An Investigative Overview of Automotive Disc Brake Noise SAE Technical Paper 1999-01-0142 1999 http://doi.org/10.4271/1999-01-0142
- Queheillalt , D.T. and Wadley , H.N.G. Pyramidal Lattice Truss Structures with Hollow Trusses Materials Science and Engineering: A 397 132 137 2005 10.1016/j.msea.2005.02.048
- Kooistra , G.W. and Wadley , H.N.G. Lattice Truss Structures from Expanded Metal Sheet Materials & Design 28 507 514 2007 10.1016/j.matdes.2005.08.013
- Deshpande , V.S. , Fleck , N.A. , and Ashby , M.F. Effective Properties of the Octet-Truss Lattice Material Journal of the Mechanics and Physics of Solids 49 1747 1769 2001 10.1016/S0022-5096(01)00010-2
- Kolpakov , A.G. Application of Homogenization Method to Justification of 1-D Model for Beam of Periodic Structure Having Initial Stresses International Journal of Solids and Structures 35 2847 2859 1998 10.1016/S0020-7683(97)00340-5
- Noor , A.K. Continuum Modeling for Repetitive Lattice Structures Applied Mechanics Reviews 41 285 296 1988 10.1115/1.3151907
- Kalamkarov AL and Kolpakov AG 1997