This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Technology Challenges and Strategies for BS-VI in Commercial Vehicles
Technical Paper
2017-28-1937
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Air Pollution is a major concern in our country due to which Indian Government has taken a decision to move from BS-IV to BS-VI which is nearly 90% reduction in NOx and 50% in particulate matter along with addition of particulate number regulation for BS-VI in comparison to BS-IV norms in very short span of time. Vehicle manufacturers are also having the challenge to produce low cost and fuel efficient product with BS-VI solution in order to meet tightening emission regulations and increasing needs of lower fuel consumption. Detailed study is done with different approaches to meet BS-VI emission which is elaborately explained in different aspect of engine design and after treatment parameter with its pros and cons. After Treatment selection plays an important role in engine development to meet stringent emission legislations and customer demands. Strategies for BS-VI were described with the advantage and drawbacks for after treatment selection. The cost of after treatment and its durability is also the major challenge to establish the BS-VI solution in the market. The injection pressure and turbo charger also play the vital role for strategic decision from the base engine side. Comparative study is done with different aspects of after treatment and base engine design aggregates to meet the emission for BS-VI.
Authors
Topic
Citation
Barman, J., Arora, P., and Patchappalam, K., "Technology Challenges and Strategies for BS-VI in Commercial Vehicles," SAE Technical Paper 2017-28-1937, 2017, https://doi.org/10.4271/2017-28-1937.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 | ||
Unnamed Dataset 5 | ||
Unnamed Dataset 6 | ||
Unnamed Dataset 7 |
Also In
References
- Gekas , I. , Vressner , A. , and Johansen , K. NOx Reduction Potential of V-SCR Catalyst in SCR/DOC/DPF Configuration Targeting Euro VI Limits from High Engine NOx Levels SAE Technical Paper 2009-01-0626 2009 10.4271/2009-01-0626
- Gekas , I. , Gabrielsson , P. , Johansen , K. , Bjørn , I. et al. Performance of a Urea SCR System Combined with a PM and Fuel Optimized Heavy-Duty Diesel Engine Able to Achieve the Euro V Emission Limits SAE Technical Paper 2002-01-2885 2002 10.4271/2002-01-2885
- Johnson , T. Diesel Emission Control in Review SAE Technical Paper 2007-01-0233 2007 10.4271/2007-01-0233
- Gekas , I. , Vressner , A. , and Johansen , K. NOx Reduction Potential of V-SCR Catalyst in SCR/DOC/DPF Configuration Targeting Euro VI Limits from High Engine NOx Levels SAE Technical Paper 2009-01-0626 2009 10.4271/2009-01-0626
- Vressner , A. , Gabrielsson , P. , Gekas , I. , and Senar-Serra , E. Meeting the EURO VI NOx Emission Legislation using a EURO IV Base Engine and a SCR/ASC/DOC/DPF Configuration in the World Harmonized Transient Cycle SAE Technical Paper 2010-01-1216 2010 10.4271/2010-01-1216
- Narayanaswamy , K. and He , Y. Modeling of Copper-Zeolite and Iron-Zeolite Selective Catalytic Reduction (SCR) Catalysts at Steady State and Transient Conditions SAE Technical Paper 2008-01-0615 2008 10.4271/2008-01-0615
- Kamasamudram , K. , Currier , N. , Szailer , T. , and Yezerets , A. Why Cu- and Fe-Zeolite SCR Catalysts Behave Differently At Low Temperatures SAE Int. J. Fuels Lubr. 3 1 664 672 2010 10.4271/2010-01-1182
- Colombo , M. , Nova I. , Tronconi , E. A comparative study of the NH3-SCR reaction over a Cu-zeolite and a Fe-zeolite catalyst Laboratory of catalysis and catalytic processes
- Shakya , B. , Harold M. , Balakotaiah , V. Simulations and optimization of combined Fe- and Cu-zeolite SCR monolith catalyst Department of chemical & Biomolecular Engineering, University of Houston
- Theis , J. , Ura , J. , Li , J. , Surnilla , G. et al. NOx Release Characteristics of Lean NOx Traps During Rich Purges SAE Technical Paper 2003-01-1159 2003 10.4271/2003-01-1159
- Theis , J. , Ura , J. , and McCabe , R. The Effects of Platinum and Rhodium on the Functional Properties of a Lean NOx Trap SAE Technical Paper 2007-01-1055 2007 10.4271/2007-01-1055
- Wirojsakunchai , E. , Kolodziej , C. , Yapaulo , R. , Foster , D. et al. Effects of DPF Washcoat Variations on DPF Active Regeneration Characteristics SAE Technical Paper 2007-24-0092 2007 10.4271/2007-24-0092
- Kawaguchi , J. , Adachi , K. , Kono , S. , and Kawakami , T. Development of VFT (Variable Flow Turbocharger) SAE paper 1999-01-1242
- Kattwinkel , T. , Weiss , R. , and Boeschlin , J. P. Mechatronic Solution for Electronic Turbocharger SAE paper 2003-01-0712
- Cantemi , C. G. Twin Turbo Strategy Operation SAE paper 2001-01-0666
- J. R. , Arnau , F. J. , Dolz , V. , Tiseira , A. , Lejeune , M. , and Auffret , N. Analysis of the Capabilities of a Two-stage Turbocharging System to Fulfill the US2007 Anti-Pollution Directive for Heavy Duty Diesel Engines International Journal of Automotive Technology 9 3 277 288 2008
- Conway , R. , Chatterjee , S. , Beavan , A. , Goersmann , C. et al. NOx and PM Reduction Using Combined SCR and DPF Technology in Heavy Duty Diesel Applications SAE Technical Paper 2005-01-3548 2005 10.4271/2005-01-3548
- Chimner , C. Transient On-Road Emission Reduction of an LNT + SCR Aftertreatment System SAE Int. J. Commer. Veh. 1 1 315 326 2009 10.4271/2008-01-2641