This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A Control-Oriented Knock Intensity Estimator

Journal Article
2017-24-0055
ISSN: 1946-3936, e-ISSN: 1946-3944
Published September 04, 2017 by SAE International in United States
A Control-Oriented Knock Intensity Estimator
Sector:
Citation: Corti, E., Forte, C., Bianchi, G., and Zoffoli, L., "A Control-Oriented Knock Intensity Estimator," SAE Int. J. Engines 10(4):2219-2229, 2017, https://doi.org/10.4271/2017-24-0055.
Language: English

References

  1. Jaesung Chung , Kyunghan Min , Seungsuk Oh , Myoungho Sunwoo In-cylinder pressure based real-time combustion control for reduction of combustion dispersions in light-duty diesel engines Applied Thermal Engineering 99 25 April 2016 1183 1189 1359-4311 http://dx.doi.org/10.1016/j.applthermaleng.2016.01.012
  2. Finesso , R. , Marello , O. , Misul , D. , Spessa , E. et al. Development and Assessment of Pressure-Based and Model-Based Techniques for the MFB50 Control of a Euro VI 3.0L Diesel Engine SAE Int. J. Engines 10 4 2017 10.4271/2017-01-0794
  3. Husted , H. , Kruger , D. , Fattic , G. , Ripley , G. et al. Cylinder Pressure-Based Control of Pre-Mixed Diesel Combustion SAE Technical Paper 2007-01-0773 2007 10.4271/2007-01-0773
  4. Schiefer , D. , Maennel , R. , and Nardoni , W. Advantages of Diesel Engine Control Using In-Cylinder Pressure Information for Closed Loop Control SAE Technical Paper 2003-01-0364 2003 10.4271/2003-01-0364
  5. Leonhardt S. , Muller N. and Isermann R. Methods for engine supervision and control based on cylinder pressure information IEEE/ASME Transactions on Mechatronics 4 3 235 245 Sep 1999 10.1109/3516.789682
  6. Yoon , M. , Lee , K. , Sunwoo , M. , and Oh , B. Cylinder Pressure Based Combustion Phasing Control of a CRDI Diesel Engine SAE Technical Paper 2007-01-0772 2007 10.4271/2007-01-0772
  7. Olsson , J. , Tunestål , P. , and Johansson , B. Closed-Loop Control of an HCCI Engine SAE Technical Paper 2001-01-1031 2001 10.4271/2001-01-1031
  8. Bengtsson , J. , Strandh , P. , Johansson , R. , Tunestål , P. and Johansson , B. 2004 Closed-loop combustion control of homogeneous charge compression ignition (HCCI) engine dynamics Int. J. Adapt. Control Signal Process 18 167 179 10.1002/acs.788
  9. Shaver G. M. , Gerdes J. C. and Roelle M. Physics-based closed-loop control of phasing, peak pressure and work output in HCCI engines utilizing variable valve actuation Proceedings of the 2004 American Control Conference Boston, MA, USA 2004 150 155 1
  10. Doosje , E. , Willems , F. , and Baert , R. Experimental Demonstration of RCCI in Heavy-Duty Engines using Diesel and Natural Gas SAE Technical Paper 2014-01-1318 2014 10.4271/2014-01-1318
  11. Carlucci A.P. , Laforgia D. , Motz S. , Saracino R. , Wenzel S.P. Advanced closed loop combustion control of a LTC diesel engine based on in-cylinder pressure signals Energy Conversion and Management 77 January 2014 193 207 0196-8904 http://dx.doi.org/10.1016/j.enconman.2013.08.054
  12. Kumar , R. , Zheng , M. , Asad , U. , and Reader , G. Heat Release Based Adaptive Control to Improve Low Temperature Diesel Engine Combustion SAE Technical Paper 2007-01-0771 2007 10.4271/2007-01-0771
  13. Rose , K. , Ariztegui , J. , Cracknell , R. , Dubois , T. et al. Exploring a Gasoline Compression Ignition (GCI) Engine Concept SAE Technical Paper 2013-01-0911 2013 10.4271/2013-01-0911
  14. Sellnau , M. , Foster , M. , Moore , W. , Sinnamon , J. et al. Second Generation GDCI Multi-Cylinder Engine for High Fuel Efficiency and US Tier 3 Emissions SAE Int. J. Engines 9 2 1002 1020 2016 10.4271/2016-01-0760
  15. Mladek , M. and Onder , C. A Model for the Estimation of Inducted Air Mass and the Residual Gas Fraction using Cylinder Pressure Measurements SAE Technical Paper 2000-01-0958 2000 10.4271/2000-01-0958
  16. Colin , G. , Giansetti , P. , Chamaillard , Y. , and Higelin , P. In-Cylinder Mass Estimation Using Cylinder Pressure SAE Technical Paper 2007-24-0049 2007 10.4271/2007-24-0049
  17. Cavina N , Ponti F. AFR estimation using in-cylinder pressure frequency analysis ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER 2003 125 812 819 0742-4795 10.1115/1.1563242
  18. Müller , N. and Isermann , R. Control of Mixture Composition Using Cylinder Pressure Sensors SAE Technical Paper 2001-01-3382 2001 10.4271/2001-01-3382
  19. Willems , F. , Doosje , E. , Engels , F. , and Seykens , X. Cylinder Pressure-Based Control in Heavy-Duty EGR Diesel Engines Using a Virtual Heat Release and Emission Sensor SAE Technical Paper 2010-01-0564 2010 10.4271/2010-01-0564
  20. FIA delegate reports https://www.fia.com/file/37249/download?token=Ltg3ifXa
  21. Tatsch , G. , Martins , M. , Lanzanova , T. , Sari , R. et al. Cylinder Pressure Based Engine Calibration of a Formula SAE Racing Engine SAE Technical Paper 2014-36-0350 2014 10.4271/2014-36-0350
  22. Patterson , G. A Technique for Processing Cylinder Pressure and Test Bed Data Sets for Engine Speed-Sweep Tests to Allow Reduced Testing Time with Enhanced Interpretation of Results SAE Technical Paper 2008-01-3006 2008 10.4271/2008-01-3006
  23. Xudong Zhen , Yang Wang , Shuaiqing Xu , Yongsheng Zhu , Chengjun Tao , Tao Xu , Mingzhi Song The engine knock analysis - An overview Applied Energy 92 April 2012 628 636 0306-2619 http://dx.doi.org/10.1016/j.apenergy.2011.11.079
  24. Lorella Ceschini , Andrea Morri , Eleonora Balducci , Nicolò Cavina , Nahuel Rojo , Lucio Calogero , Luca Poggio Experimental observations of engine piston damage induced by knocking combustion Materials & Design 114 15 January 2017 312 325 0264-1275 http://dx.doi.org/10.1016/j.matdes.2016.11.015
  25. Di Gioia , R. , Papaleo , D. , Vicchi , F. , and Cavina , N. Virtual GDI Engine as a Tool for Model-Based Calibration SAE Technical Paper 2012-01-1679 2012 10.4271/2012-01-1679
  26. Yang X. and Zhu G. G. A mixed mean-value and crank-based model of a dual-stage turbocharged SI engine for Hardware-In-the-Loop simulation Proceedings of the 2010 American Control Conference Baltimore, MD 2010 3791 3796 10.1109/ACC.2010.5531459
  27. Ponti , F. , De Cesare , M. , and Ravaglioli , V. Development and Validation of a Methodology for Real-Time Evaluation of Cylinder by Cylinder Torque Production Non-Uniformities SAE Technical Paper 2011-24-0145 2011 10.4271/2011-24-0145
  28. Ponti , F. , Ravaglioli , V. , Moro , D. , Serra , G. MFB50 on-board estimation methodology for combustion control 2013 Control Engineering Practice 21 12 1821 1829 10.1016/j.conengprac.2013.05.001
  29. Ponti , F. , Ravaglioli , V. , Moro , D. , Serra , G. MFB50 on-board estimation methodology for combustion control 2013 Control Engineering Practice 21 12 1821 1829 10.1016/j.conengprac.2013.05.001
  30. Worret , R. , Bernhardt , S. , Schwarz , F. , and Spicher , U. Application of Different Cylinder Pressure Based Knock Detection Methods in Spark Ignition Engines SAE Technical Paper 2002-01-1668 2002 10.4271/2002-01-1668
  31. Bozza , F. , De Bellis , V. , Minarelli , F. , and Cacciatore , D. Knock and Cycle by Cycle Analysis of a High Performance V12 Spark Ignition Engine. Part 2: 1D Combustion and Knock Modeling SAE Int. J. Engines 8 5 2002 2011 2015 10.4271/2015-24-2393
  32. Livengood , J. C. and Wu , P. C. Correlation of Autoignition Phenomenon in Internal Combustion Engines and Rapid Compression Machines Fifth Symposium (International) on Combustion 347 356 1955
  33. Millo , F. , Rolando , L. , Pautasso , E. , and Servetto , E. A Methodology to Mimic Cycle to Cycle Variations and to Predict Knock Occurrence through Numerical Simulation SAE Technical Paper 2014-01-1070 2014 10.4271/2014-01-1070
  34. Corti , E. , Forte , C. , Cazzoli , G. , Moro , D. , Falfari , S. , Ravaglioli , V. Comparison of Knock Indexes Based on CFD Analysis Energy Procedia 101 2016 917 924 1876-6102 http://dx.doi.org/10.1016/j.egypro.2016.11.116
  35. Corti , E. , Forte , C. , Bianchi , G. , and Moro , D. Relating Knocking Combustions Effects to Measurable Data SAE Int. J. Engines 8 5 2133 2144 2015 10.4271/2015-24-2429
  36. Mehl , M. , Faravelli , T. , Ranzi , E. , Lucchini , T. et al. Kinetic Modeling of Knock Properties in Internal Combustion Engines SAE Technical Paper 2006-01-3239 2006 10.4271/2006-01-3239
  37. Guezennec , Y. and Hamama , W. Two-Zone Heat Release Analysis of Combustion Data and Calibration of Heat Transfer Correlation in an I. C. Engine SAE Technical Paper 1999-01-0218 1999 10.4271/1999-01-0218
  38. Forte , C. , Corti , E. , Bianchi , G. , Falfari , S. et al. A RANS CFD 3D Methodology for the Evaluation of the Effects of Cycle By Cycle Variation on Knock Tendency of a High Performance Spark Ignition Engine SAE Technical Paper 2014-01-1223 2014 10.4271/2014-01-1223
  39. D'Adamo , A. , Breda , S. , Fontanesi , S. , and Cantore , G. A RANS-Based CFD Model to Predict the Statistical Occurrence of Knock in Spark-Ignition Engines SAE Int. J. Engines 9 1 618 630 2016 10.4271/2016-01-0581
  40. Leppard W. R. Individual-Cylinder Knock Occurrence and Intensity in Multi-Cylinder Engines SAE Techinical paper, 820074 1982
  41. Kim , K. and Ghandhi , J. A Simple Model of Cyclic Variation SAE Technical Paper 2012-32-0003 2012 10.4271/2012-32-0003
  42. Dai , W. , Trigui , N. , and Lu , Y. Modeling of Cyclic Variations in Spark-Ignition Engines SAE Technical Paper 2000-01-2036 2000 10.4271/2000-01-2036
  43. Vitek , O. , Macek , J. , Poetsch , C. , and Tatschl , R. Modeling Cycle-to-Cycle Variations in 0-D/1-D Simulation by Means of Combustion Model Parameter Perturbations based on Statistics of Cycle-Resolved Data SAE Int. J. Engines 6 2 1075 1098 2013 10.4271/2013-01-1314
  44. Tatschl , R. , Bogensperger , M. , Pavlovic , Z. , Priesching , P. et al. LES Simulation of Flame Propagation in a Direct-Injection SI-Engine to Identify the Causes of Cycle-to-Cycle Combustion Variations SAE Technical Paper 2013-01-1084 2013 10.4271/2013-01-1084
  45. Forte , C. , Corti , E. , Bianchi , G. , Falfari , S. et al. A RANS CFD 3D Methodology for the Evaluation of the Effects of Cycle By Cycle Variation on Knock Tendency of a High Performance Spark Ignition Engine SAE Technical Paper 2014-01-1223 2014 10.4271/2014-01-1223

Cited By