This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Influence of In-Cylinder Air Flow on Spray Propagation

Journal Article
2017-01-9280
ISSN: 1946-3936, e-ISSN: 1946-3944
Published June 29, 2017 by SAE International in United States
Influence of In-Cylinder Air Flow on Spray Propagation
Sector:
Citation: Braun, M., Palmer, J., Overbrueggen, T., Klaas, M. et al., "Influence of In-Cylinder Air Flow on Spray Propagation," SAE Int. J. Engines 10(4):1398-1410, 2017, https://doi.org/10.4271/2017-01-9280.
Language: English

References

  1. Hoppe F. , Burke U. , Thewes M. , Heufer A. et al. Tailor-Made Fuels from Biomass: Potentials of 2-butanone and 2-methylfuran in direct injection spark ignition engines Fuel 167 106 117 2016 10.1016/j.fuel.2015.11.039
  2. Thewes M. , Muether M. , Pischinger S. , Budde M. et al. Analysis of the Impact of 2-Methylfuran on Mixture Formation and Combustion in a Direct-Injection Spark-Ignition Engine Energy & Fuels 25 12 5549 5561 2011 10.1021/ef201021a
  3. Brassat A. , Thewes M. , Müther M. , and Pischinger S. Massgeschneiderte Kraftstoffe aus Biomasse für Ottomotoren MTZ Motortech Zeitschrift 72 12 988 995 2011 10.1365/s35146-011-0212-2
  4. Janssen , A. , Muether , M. , Pischinger , S. , Kolbeck , A. et al. Tailor-Made Fuels: The Potential of Oxygen Content in Fuels for Advanced Diesel Combustion Systems SAE Technical Paper 2009-01-2765 2009 10.4271/2009-01-2765
  5. Daniel R. , Tian G. , Xu H. , Wyszynski M. L. et al. Effect of spark timing and load on a DISI engine fuelled with 2,5-dimethylfuran Fuel 90 2 449 458 2011 10.1016/j.fuel.2010.10.008
  6. Wang C. , Xu H. , Daniel R. , Ghafourian A. et al. Combustion characteristics and emissions of 2-methylfuran compared to 2,5-dimethylfuran, gasoline and ethanol in a DISI engine Fuel 103 200 211 2013 10.1016/j.fuel.2012.05.043
  7. Mathieu , F. , Reddemann , M. , Martin , D. , and Kneer , R. Experimental Investigation of Fuel Influence on Atomization and Spray Propagation Using an Outwardly Opening GDI-Injector SAE Technical Paper 2010-01-2275 2010 10.4271/2010-01-2275
  8. Pastor J. , García-Oliver J. , Nerva J.-G. , and Giménez B. Fuel effect on the liquid-phase penetration of an evaporating spray under transient diesel-like conditions Fuel 90 11 3369 3381 2011 10.4271/2011-01-0686
  9. Bardi M. , Payri R. , Malbec L. M. , Bruneaux G. et al. Engine Combustion Network: Comparison of spray development, vaporization and combustion in different combustion vessels Atomization and Sprays 22 10 807 842 2012 10.1615/AtomizSpr.2013005837
  10. Overbrueggen , T. , Braun , M. , Klaas , M. , and Schroder , W. Experimental Analysis of the Impact of Injected Biofuels on In-Cylinder Flow Structures SAE Int. J. Engines 9 2 1320 1348 2016 10.4271/2016-01-9043
  11. Borée J. and Miles P. C. In-Cylinder Flow Encyclopedia of Automotive Engineering 2014 10.1002/9781118354179.auto119
  12. Hoppe F. , Heuser B. , Thewes M. , Kremer F. et al. Tailor-made fuels for future engine concepts Int. J. Engine Res. 17 1 16 27 2016 10.1177/1468087415603005
  13. Sun Y. and Cheng J. Hydrolysis of lignocellulosic materials for ethanol production: a review Bioresource technology 83 1 1 11 2002 10.1016/S0960-8524(01)00212-7
  14. Dahmen , M. , Hechinger , M. , Victoria Villeda , J. , and Marquardt , W. Towards Model-Based Identification of Biofuels for Compression Ignition Engines SAE Int. J. Fuels Lubr. 5 3 990 1003 2012 10.4271/2012-01-1593
  15. Hoppe F. , Thewes M. , Kremer F. , and Pischinger S. Tailor-made Fuels for Highly Boosted Gasoline Engines ATZextra worldwide 21 11 32 37 2016 10.1007/s40111-015-0512-5
  16. Gong Y. and Lin L. Oxidative De-carboxylation of Levulinic Acid by Silver(i)/Persulfate Molecules 16 3 2714 2725 2011 10.3390/molecules16032714
  17. Gong Y. , Lin L. , Shi J. , and Liu S. Oxidative Decarboxylation of Levulinic Acid by Cupric Oxides Molecules 15 11 7946 7960 2010 10.3390/molecules15117946
  18. Yoneda H. , Tantillo D. J. , and Atsumi S. Biological Production of 2-Butanone in Escherichia Coli ChemSusChem 7 1 2014 10.1002/cssc.201300853
  19. vom Stein T. , Grande P. M. , Kayser H. , Sibilla F. et al. From biomass to feedstock: one-step fractionation of lignocellulose components by the selective organic acid-catalyzed depolymerization of hemicellulose in a biphasic system Green Chemistry 13 7 1772 1777 2011 10.1039/C1GC00002K
  20. Al-Hasan M. Effect of ethanol-unleaded gasoline blends on engine performance and exhaust emission Energy Conversion and Management 44 9 1547 1561 2003 10.1016/S0196-8904(02)00166-8
  21. Wyszynski , L. , Stone , C. , and Kalghatgi , G. The Volumetric Efficiency of Direct and Port Injection Gasoline Engines with Different Fuels SAE Technical Paper 2002-01-0839 2002 10.4271/2002-01-0839
  22. Daubert T. and Danner R. Physical and Thermodynamic Properties of Pure Chemicals Hemisphere Pub. Corp. New York 2000
  23. Bauer K. , Heilmann G. , Köpcke G. , Reders K. et al. Abschlussbericht: Klopffestigkeitsbestimmung (ROZ und MOZ) von Alkoholen und Alkoholmischkraftstoffen in CFR-Prüfmotoren DGMK Forschungsbericht 260-01 1980
  24. Anderson J. , Kramer U. , Mueller S. , and Wallington T. Octane Numbers of Ethanol- and Methanol-Gasoline Blends Estimated from Molar Concentrations Energy & Fuels 24 12 6576 6585 2010 10.1021/ef101125c
  25. Mathieu F. , Cárdenas M. , Reddemann M. , Martin D. et al. Fuel Influence on Propagation and Near-Nozzle Velocities of GDI Hollow-Cone Sprays ILASS Europe 2011, 24th European Conference on Liquid Atomization and Spray Systems 2011
  26. Bücker I. , Karhoff D.-C. , Klaas M. , and Schröder W. Stereoscopic multi-planar PIV measurements of in-cylinder tumbling flow Experiments in fluids 53 6 1993 2009 2012 10.1007/s00348-012-1402-5
  27. Adomeit , P. , Jakob , M. , Pischinger , S. , Brunn , A. et al. Effect of Intake Port Design on the Flow Field Stability of a Gasoline DI Engine SAE Technical Paper 2011-01-1284 2011 10.4271/2011-01-1284
  28. Karhoff , D. , Bücker , I. , Dannemann , J. , Klaas , M. et al. Experimental Analysis of Three-Dimensional Flow Structures in Two Four-Valve Combustion Engines SAE Technical Paper 2011-24-0044 2011 10.4271/2011-24-0044
  29. Kastengren A. L. , Tilocco F. Z. , Powell C. F. , Manin J. et al. Engine Combustion Network (ECN): Measurements of nozzle geometry and hydraulic behavior Atomization and Sprays 22 12 1011 1052 2012 10.1615/AtomizSpr.2013006309
  30. Desantes J. M. , Pastor J. , Payri R. , and Pastor J. M. Experimental characterization of internal nozzle flow and diesel spray behavior. Part II: evaporative conditions Atomization and sprays 15 5 2005 10.1615/AtomizSpr.v15.i5.30
  31. Siebers , D. Liquid-Phase Fuel Penetration in Diesel Sprays SAE Technical Paper 980809 1998 10.4271/980809
  32. Pickett , L. , Manin , J. , Genzale , C. , Siebers , D. et al. Relationship Between Diesel Fuel Spray Vapor Penetration/Dispersion and Local Fuel Mixture Fraction SAE Int. J. Engines 4 1 764 799 2011 10.4271/2011-01-0686
  33. Palmer , J. , Ramesh , M. , Kirsch , V. , Reddemann , M. et al. Spray Analysis of C8H18O Fuel Blends Using High-Speed Schlieren Imaging and Mie Scattering SAE Technical Paper 2015-24-2478 2015 10.4271/2015-24-2478
  34. Stanglmaier , R. , Li , J. , and Matthews , R. The Effect of In-Cylinder Wall Wetting Location on the HC Emissions from SI Engines SAE Technical Paper 1999-01-0502 1999 10.4271/1999-01-0502
  35. Stevens , E. and Steeper , R. Piston Wetting in an Optical DISI Engine: Fuel Films, Pool Fires, and Soot Generation SAE Technical Paper 2001-01-1203 2001 10.4271/2001-01-1203

Cited By