This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Orthogonal Optimum Design of High-Speed Solenoid Valve for the Injection System of Unit Pump
Technical Paper
2017-01-2198
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The electromagnetic valve driving mechanism is the significant equipment, which plays a vital role in the unit pump injection system; therefore, the performance of the electromagnetic valve directly influences the function of the control system. Based on the operation conditions of the unit pump injection system, a steady electromagnetic valve model was modified to study the influence factors of electromagnetic force and the best combination to get the maximum electromagnetic force. The validation model was verified by experiment. The effects of some crucial parameters upon the electromagnetic force were investigated in the present paper, (including working airspace, magnetic pole’s cross-sectional area, coil position, coil turn, the armature thickness). The results show that the electromagnetic force of the solenoid valve enhanced with the increase of driving current and with the decrease of working airspace. Besides that, the electromagnetic force won’t continuously rise if the driving current goes up to the threshold. Such results seem can be employed to explain the magnetic saturation phenomenon. In addition, the electromagnetic force will correspondingly rise with the increasing of armature thickness, increasing of coil turns, closing the coil’s position towards armature’s centre and equalizing the cross-sectional areas of major and vice poles. Based on the calculation, the greatest electromagnetic force was obtained by means of orthogonal design. The results prove that the method is feasible and accurate to obtain the key parameters of the solenoid valve in order to achieve the greatest electromagnetic force. The research results have a great engineering significance to the promotion of the electromagnetic force.
Authors
- Zhihong Li - Beijing Jiaotong University
- Guoxiu Li - Beijing Jiaotong University
- Lan Wang - Beijing Jiaotong University
- Hongmeng Li - Beijing Jiaotong University
- Jie Wang - China North Engine Research Institute
- Haizhou Guo - China North Engine Research Institute
- Shuangyi He - China North Engine Research Institute
Citation
Li, Z., Li, G., Wang, L., Li, H. et al., "Orthogonal Optimum Design of High-Speed Solenoid Valve for the Injection System of Unit Pump," SAE Technical Paper 2017-01-2198, 2017, https://doi.org/10.4271/2017-01-2198.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Unnamed Dataset 4 | ||
| Unnamed Dataset 5 | ||
| Unnamed Dataset 6 | ||
| Unnamed Dataset 7 | ||
| Unnamed Dataset 8 |
Also In
References
- Li , X.R. , Sun , Z.Y. , Du , W. et al. Research and development of double swril combustion system for a DI diesel engine Combust Sci Technol 182 1029 1049 2010
- Hallstrom , K. and Shah , S. Emission Control Options and Optimization for BSVI Heavy Duty Diesel Applications SAE Technical Paper 2017-26-0120 2017 10.4271/2017-26-0120
- Sun , Z.Y. , Li , G.X. , Yu , Y.S. et al. Numerical investigation on transient flow and cavitation characteristic within nozzle during the oil drainage process for a high-pressure common-rail DI diesel engine Energy Conversion and Management 98 507 517 2015
- Lamotte , D. , Neumann , P. , and Schrewe , K. Additive Based Regeneration Adjusted for Indian Low Load Driving Profiles SAE Technical Paper 2017-26-0144 2017 10.4271/2017-26-0144
- Sun , Z.Y. , Li , G.X. , Chen , C. et al. Numerical investigation on effects of nozzle’s geometric parameters on the flow and the cavitation characteristics within injector’s nozzle for a high-pressure common-rail DI diesel engine Energy Conversion and Management 89 834 861 2015
- Huber , B. and Ulbrich , H. Modeling and Experimental Validation of the Solenoid Valve of a Common Rail Diesel Injector SAE Technical Paper 2014-01-0195 2014 10.4271/2014-01-0195
- Fan , L. , Long , W. , Zhu , Y. , and Xue , Y. A Characteristic Study of Electronic In-line Pump System for Diesel Engines SAE Technical Paper 2008-01-0943 2008 10.4271/2008-01-0943
- Liyun , F. , Yuanxian , Z. , Xiuzhen , M. , Bingqi , T. et al. Quantitative Analysis on Cycle Fuel Injection Quantity Fluctuation of Diesel Engine Electronic In-line Pump System SAE Technical Paper 2010-01-0875 2010 10.4271/2010-01-0875
- Yang , B. , Wei , X. , Zeng , K. , and Lai , M. The Development of an Electronic Control Unit for a High Pressure Common Rail Diesel/ Natural Gas Dual-Fuel Engine SAE Technical Paper 2014-01-1168 2014 10.4271/2014-01-1168
- Sun , ZY. , Li , GX. , Wang , L. , Wang , WL. , Gao , QX. , Wang , J. Effects of structure parameters on the static electromagnetic
- Fan L Y , Gao M C , Yao C et al. Numerical Simulation of Electromagnetic Force of High-Speed Solenoid Valve for Diesel Engine Electronic Unit Pump[C] Proceedings of the 2012 Third International Conference on Mechanic Automation and Control Engineering IEEE Computer Society 2012 593 598
- Liu P , Fan L Y , Bai Y et al. Modeling and analysis of electromagnetic force approximate model of high-speed solenoid valve Article in Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering 31 16 96 101
- characteristics of solenoid valve for an electronic unit pump Energy Conversion and Management 113 119 130 2016
- Barkhimer , R. , Beck , N. , and Weseloh , W. Development of a Durable, Reliable and Fast Responding Solenoid Valve SAE Technical Paper 831326 1983 10.4271/831326
- Yang , Q. , Zhang , H. , Huang , G. , Zhang , Y. et al. A study on the fast response solenoid valve in the electronic control of diesel engine SAE Technical Paper 2000-05-0123
- Bianchi , G. , Pelloni , P. , Filicori , F. , and Vannini , G. Optimization of the Solenoid Valve Behavior in Common-Rail Injection Systems SAE Technical Paper 2000-01-2042 2000 10.4271/2000-01-2042
- Fan L Y , Xu D , Fei H Z et al. Key parameters' correlation analysis on high-speed solenoid valve electromagnetic force under overall operating conditions Article in Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering 31 6 89 96
- De Giorgi , M. , Ficarella , A. , and Breitbach , H. Cavitation Effects and Transient Behavior for the Control Valve of a High-Pressure Diesel Injection System SAE Technical Paper 2001-01-1979 2001 10.4271/2001-01-1979
- Nouri , J. , Mitroglou , N. , Yan , Y. , and Arcoumanis , C. Internal Flow and Cavitation in a Multi-Hole Injector for Gasoline Direct-Injection Engines SAE Technical Paper 2007-01-1405 2007 10.4271/2007-01-1405
- Bastawissi , H. and Elkelawy , M. Computational Evaluation of Nozzle Flow and Cavitation Characteristics in a Diesel Injector SAE Int. J. Engines 5 4 1605 1616 2012 10.4271/2012-01-1652
- Lockett , R. , Fatmi , Z. , Kuti , O. , and Price , R. An Optical Characterization of the Effect of High-Pressure Hydrodynamic Cavitation on Diesel SAE Technical Paper 2016-01-0841 2016 10.4271/2016-01-0841
- Szente , V. and Vad , J. Computational and experimental investigation on solenoid valve dynamics. In: IEEE/ASME international conference on 2001 Adv Intell Mech 1 618 23 2001
- Maiti , R. , Saha , R. , Watton , J. The static and dynamic characteristics of a pressure relief valve with a proportional solenoid-controlled pilot stage Journal of Systems and Control Engineering 216 143 156 2002
- Tao , G. , Chen , HY. , He , ZB. Optimal design of the magnetic field of a high-speed response solenoid valve J Mater Process Technol 129 555 8 2002
- Thompson Company New solenoid valve from Thompson World Pumps 469 12 2005
- Luharuka , R. , Blanc , SL. , Bintoro , J. et al Simulated and experimental dynamic response characterization of an electromagnetic micro-valve Sensor Actuat A - Phys 143 399 408 2008
- Ye , QF. and Chen , JP. Dynamic analysis of a pilot-operated two-stage solenoid valve used in pneumatic system Simulation Modelling Practice and Theory 17 794 816 2009
- Angadi , SV. , Jackson , RL. , Choe , SY. et al Reliability and life study of hydraulic solenoid valve - Part 1: A multi-physics finite element model Eng Fail Anal 16 874 87 2009
- Angadi , SV. , Jackson , RL. , Choe , SY. et al Reliability and life study of hydraulic solenoid valve - Part 2: Experimental study Eng Fail Anal 16 944 63 2009
- Liu , QF. , BO , HL. , Qin , BK. Experimental study and numerical analysis on electromagnetic force of direct action solenoid valve Nuclear Engineering and Design 240 4031 4036 2010
- Liu , QF. , BO , HL. , Qin , BK. Design and analysis of direct action solenoid valve based on computational intelligence Nuclear Engineering and Design 240 2890 2896 2010
- Liu , QF. , BO , HL. , Qin , BK. Optimization of direct action solenoid valve based on CloudPSO Annals of Nuclear Energy 53 299 308 2013
- Al-Jaber , SM. Energy and momentum considerations in an ideal solenoid J Electromagnet Anal Appl 2 169 73 2010
- Wang , QL. , Yang , FY. , Yang , Q. Experimental analysis of new high-speed powerful digital solenoid valves Energy Conversion and Management 52 2309 2313 2011
- Naseradinmousavi , P. , Nataraj , C. Transient chaos and crisis phenomena in butterfly valves driven by solenoid actuators Commun Nonlinear Sci Numer Simulat 17 4336 4345 2012
- Chen Q , Zhang ZD , Guo H et al Simulation and analysis on electromagnetic-thermal coupling of solenoid GDI injector Int J Appl Electrom 46 775 92 2014
- Miller , JI. , Flack , TJ. , Cebon , D. Modeling the magnetic performance of a fast pneumatic brake actuator J Dyn Sys Meas Control 136 021022 2014
- Tang , SQ. , Xu , YF. , Zhu , GY. et al Orthogonal Experiment Optimum Design in the Power of the Rotor on Straight-Bladed VAWT Energy Procedia 12 856 861 2011