This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Simarouba Biodiesel Blends as an Alternative Fuel for Compression Ignition Engine and Its Optimization Using Multiple Regression Analysis on CI Engine Performance (BTE) and Emissions (CO 2 , HC) Characteristics
Technical Paper
2017-01-2136
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The objective of this work is to optimize the operating parameters of the Direct Injection Single Cylinder (5.2 kw) CI engine with respect to Brake Thermal Efficiency (BTE), Hydrocarbons (HC) and Carbon dioxide (CO2). For this investigation, we used Simarouba Biodiesel as an alternate fuel for diesel fuel which possesses low cetane number which is not sufficient to operate existing diesel engine. However, this could be combined with the diesel fuel in the form of blends. For this investigation four levels and four parameters were selected viz. Injection Pressure (IP), Fuel Fraction (FF), Compression Ratio (CR) and Injection Timing (Before TDC). Taguchi Method is used for minimizing the number of experiments and Multiple Regression Analysis is used to find the optimum condition. Three outputs variables such as; Brake Thermal Efficiency (BTE), content of HC particles and CO2 in the emission are measured and considered its influence on CI Engine performance. The test was carried out at full load condition and the optimized condition are found such as; 18:1 Compression Ratio, 250 bar Injection Pressure, 22° Injection Timing and 20% Fuel Fraction. The optimized condition gives better performance than diesel, HC emission is nearly similar as that for diesel fueled engine but CO2 slightly increases.
Authors
Topic
Citation
Sayyad, A., Salunke, P., and Jadhav, S., "Simarouba Biodiesel Blends as an Alternative Fuel for Compression Ignition Engine and Its Optimization Using Multiple Regression Analysis on CI Engine Performance (BTE) and Emissions (CO2, HC) Characteristics," SAE Technical Paper 2017-01-2136, 2017, https://doi.org/10.4271/2017-01-2136.Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Unnamed Dataset 4 | ||
| Unnamed Dataset 5 | ||
| Unnamed Dataset 6 | ||
| Unnamed Dataset 7 | ||
| Unnamed Dataset 8 | ||
| Unnamed Dataset 9 | ||
| Unnamed Dataset 10 |
Also In
References
- Tamilvendhan D. , Ilangovan V. and Karthikeyan R. Optimisation Of Engine Operating Parameters For Eucalyptus Oil Mixed Diesel Fueled Di Diesel Engine Using Taguchi Method 2014, International Journal of Engineering Research & Technology (IJERT) 3 1 January 2014
- Patel Saumil C , Dr. Brahmbhatt Pragnesh K Parametric Optimization of Single Cylinder Diesel Engine for Brake Thermal Efficiency Using Tyre Pyrolysis Oil and Diesel Blend 2015, International Journal of Scientific & Engineering Research 6 3 March 2015
- Srinivasa Rao. P. , Srinivas K. Experimental Analysis Of Single Cylinder Diesel Engine Fuelled With Methyl Ester Of Palm Kernel Oil Blending With Eucalyptus Oil 2012, International Journal of Engineering Research and Applications (IJERA) 2 5
- Patil A.R. and Taji S.G. 2007 Effect of oxygenated fuel additive on Diesel Engine Performance and Emission IOSR-JMCE 2278-1684
- Sivaramakrishnan K. & Ravikumar P. 2012 Performance optimization of karanja biodiesel engine using taguchi approach and multiple regressions ARPN Journal of Engineering and Applied Sciences April 2012 7 4 506 516
- Jadhav Sangram D. , Tandale Madhukar S. , Garjepatil Ganesh V. 2016 Optimization Of Performance & Emission Characteristics Of Compressed Ignition Engine Operated On Mahuma Biodiesel Using Taguchi And Multiple Regression Analysis WCE 2016 London,U.K.
- Yang , B. , Mellor , A. , and Chen , S. Multiple Injections with EGR Effects on NOx Emissions for DI Diesel Engines Analyzed Using an Engineering Model SAE Technical Paper 2002-01-2774 2002 10.4271/2002-01-2774
- Natarajan M. , Arunachalam V P , Dhandapani N 2005 Optimizing diesel engine parameters for low emissions using Taguchi method: Variation Risk Analysis Approach part-1 International Journal of Engineering and MS June 2005 12 169 181
- Balajiganesh N. & Reddy B. Chandra Mohan 2011 Optimization of C.I Engine Parameters Using Artificial Neural International Journal of Mechanical and Industrial Engineering (IJMIE) 2011 1 2
- Ozcanli1 Abdulkadir Yasar Mustafa , Serin1 Hasan and Aydin Kadir 2014 Compression Ratio and Injection Angle Effect on Performance and Emissions of a Diesel Engine Fuelled With Rapeseed Biodiesel and Diesel Fuel 3rd International Conference on Geological and Environmental Sciences IPCBEE 73 10.7763/IPCBEE 2014
- Wilson Vincent H. and Udayakumar 2012 Optimization of diesel engine parameters using taguchi method and design of evaluation J.of the Braz.soc.of mech. sci & engg. ABCM 716 72
- Mr. Patel Krunal B , Prof. Patel Tushar M , Mr. Patel Saumil C 2013 Parametric Optimization of Single Cylinder Diesel Engine for Pyrolysis Oil and Diesel Blend for Specific Fuel Consumption Using Taguchi Method IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) Mar April 2013 6 1 83 88