This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Future Challenges for Engine Manufacturers in View of Future Emissions Legislation
ISSN: 0148-7191, e-ISSN: 2688-3627
Published May 10, 2017 by SAE International in United States
This content contains downloadable datasetsAnnotation ability available
Countries around the world are expected to continue to adopt more stringent emissions standards for heavy-duty markets for both oxides of nitrogen (NOx) and greenhouse gases (GHG). While there is uncertainty about the timing and extent of these regulations, it is clear that significant reductions will be required to address urban air pollution and climate change concerns. The rate and pace of technology evolution and how it will affect the energy pathways for commercial transportation and industrial use are dependent on multiple variables such as national energy and environmental policies and public-private partnerships. Although it adds complexity, the engine system has great potential to evolve as it continues to be highly integrated into the super system for which it is producing power. This paper examines the potential opportunities and challenges for engine manufacturers to continue to be the supplier of power to vehicles and equipment of the future.
|Technical Paper||Development of Rule 66 Complying Solvents|
|Technical Paper||An Investigation of SF6 Gas for Testing Instrumental Integrity of the Emerging SULEV/PZEV Measurement Technology|
|Special Publication||General Emissions Research and Development|
CitationEckerle, W., Sujan, V., and Salemme, G., "Future Challenges for Engine Manufacturers in View of Future Emissions Legislation," SAE Technical Paper 2017-01-1923, 2017, https://doi.org/10.4271/2017-01-1923.
Data Sets - Support Documents
|[Unnamed Dataset 1]|
- Schultz, R., “California Vehicle Electrification Study”, Cummins Internal Analysis, January 2017.
- Koeberlein, D., “Cummins SuperTruck Program Technology and System Level Demonstration of Highly Efficient and Clean, Diesel Powered Class 8 Trucks.” Annual Merit Review ACE057, 2014, Vehicle Technologies Office, DOE.
- Kocher, L., “Cummins 55% BTE Project”, Annual Merit Review ACE098, 2016, Vehicle Technologies Office, DOE.
- Naseri, M., Aydin, C., Mulla, S., Conway, R. et al., "Development of Emission Control Systems to Enable High NOx Conversion on Heavy Duty Engines," SAE Int. J. Engines 8(3):1144-1151, 2015, doi:10.4271/2015-01-0992.
- Suresh, A., Langenderfer, D., Arnett, C., and Ruth, M., "Thermodynamic Systems for Tier 2 Bin 2 Diesel Engines," SAE Int. J. Engines 6(1):167-183, 2013, doi:10.4271/2013-01-0282.
- Chilumukuru, K., Gupta, A., Ruth, M., Cunningham, M. et al., "Aftertreatment Architecture and Control Methodologies for Future Light Duty Diesel Emission Regulations," SAE Int. J. Engines 10(4):2017, doi:10.4271/2017-01-0911.
- Sharp, C., Webb, C., Yoon, S., Carter, M. et al., "Achieving Ultra Low NOX Emissions Levels with a 2017 Heavy-Duty On-Highway TC Diesel Engine - Comparison of Advanced Technology Approaches," SAE Int. J. Engines 10(4):2017, doi:10.4271/2017-01-0956.
- Zha, Y., “Cummins Sustained Low Temperature NOx Reduction (SLTNR)”, Annual Merit Review PM068, 2016, Vehicle Technologies Office, DOE.
- Kocher, “Cummins EDPCI Project E85/Diesel Premixed Compression Ignition”, Annual Merit Review FT043, 2016, Vehicle Technologies Office, DOE.
- Perfetto, A., Kameshwaran, K., Geckler, S., Zope, R. et al., “Ethanol Optimized Powertrain for Medium Duty Trucks,” Proceedings of the ASME 2014 Internal Combustion Engine Division Fall Technical Conference, doi: 10.1115/ICEF2014-5601.
- Lee, J., Zhang, Y., Tzanetakis, T., Traver, M. et al., "Emission Performance of Low Cetane Naphtha as Drop-In Fuel on a Multi-Cylinder Heavy-Duty Diesel Engine and Aftertreatment System," SAE Technical Paper 2017-01-1000, 2017, doi:10.4271/2017-01-1000.
- Nguyen, T., Ward, J., Johnson, K. (2013). “Well-to-Wheels Greenhouse Gas Emissions and Petroleum Use for Mid-Sized Light-Duty Vehicles”. DOE Program Record - Offices of Bioenergy Technologies, Fuel Cell Technologies and Vehicle Technologies. Record #13005, Department of Energy, U.S.A
- Technology Assessment: Medium- and Heavy-Duty Fuel Cell Electric Vehicles. California Environmental Protection Agency Air Resources Board. November, 2015
- Eckermann, E. (2001). World History of the Automobile. Warrendale, PA: Society of Automotive Engineers
- Wood, E., Wang, L., Gonder, J., Ulsh, M. (2013). Overcoming the Range Limitation of Medium-Duty Battery Electric Vehicles through the use of Hydrogen Fuel-Cells. SAE 2013 Commercial Vehicle Engineering Congress
- Badwal, S., Giddey, S., Munnings, C., Bhatt, A., Hollenkamp, A (2014). Emerging electrochemical energy conversion and storage technologies. Frontiers in Chemistry. V.2, 2014. doi:10.3389/fchem.2014.00079. PMC 4174133. PMID 25309898
- Wishart, J.; Zhou, Y.; Dong, Z. (2008). Review of multi-regime hybrid vehicle powertrain architecture. International Journal of Electric and Hybrid Vehicles. 1 (3): 248-275. doi:10.1504/IJEHV.2008.019900
- Cheong, K. L., Li P. Y., and Chase T. R. (2011). Optimal design of power-split transmissions for hydraulic hybrid passenger vehicles. American Control Conference (ACC), 2011, pp. 3295-3300, IEEE
- Freyermuth, V., Fallas E., and Rousseau A. (2008). Comparison of powertrain configuration for plug-in HEVs from a fuel economy perspective. Tech. rep., SAE Technical Paper.
- Hybrid Electric Vehicles. 2011 White Paper by Wroclaw University of Technology
- Kim, N., Cha S., and Peng H. (2011). Optimal control of hybrid electric vehicles based on Pontryagin’s minimum principle. IEEE Transactions on Control Systems Technology, 19(5), 1279-1287.
- Paganelli, G., Delprat S., Guerra T.-M., Rimaux J., and Santin J.-J. (2002). Equivalent consumption minimization strategy for parallel hybrid powertrains. Conference in Vehicular Technology Conference. VTC Spring 2002. IEEE 55th, vol. 4, pp. 2076-2081, IEEE.
- Elgowainy, A., Wang, M.Q. (2008). Fuel Cycle Comparison of Distributed Power Generation Technologies, Center for Transportation Research, Argonne National Laboratory.
- U.S. Department of Energy. Fuel Cell Handbook. National Technical Information Service, U.S. Department of Commerce, 7th edition, 2004
- De Boera P.C.T., McLeana W.J. and Homana H.S. (1976). Performance and emissions of hydrogen fueled internal combustion engines. International Journal of Hydrogen Energy. 1 (2): 153-172
- Xuan Cheng, Zheng Shi, Nancy Glass, Lu Zhang, Jiujun Zhang, Datong Song, Zhong-Sheng Liu, Haijiang Wang, Jun Shen (2007). A review of PEM hydrogen fuel cell contamination: Impacts, mechanisms, and mitigation. Journal of Power Sources, Volume 165, Issue 2, 20 March 2007, Pages 739-756
- Marcinkoski, J., Wilson, A., Papageorgopoulos, D. (2016). Fuel Cell System Cost - 2016. DOE Hydrogen and Fuel Cells Program Record #16020, Department of Energy, U.S.A.
- James, B., Kalinoski, J., Baum, K. (2010) Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for Automotive Applications. Directed Technologies Inc., Report generated for Hydrogen, Fuel Cells & Infrastructure Technologies Program, Fuel Cell Technologies Office, Department of Energy, January 2010
- Pei, P., et.al. (2009). Dynamic response during PEM fuel cell loading-up. Materials, vol. 2, no. 3, pp. 734-748, 2009.
- Kawamura, A., Yanai, T., Sato, Y., Naganuma, K., Yamane, K., Takagi, Y. Summary and Progress of the Hydrogen ICE Truck Development Project. 2009 SAE International Int. J. Commer. Veh., Volume 2, Issue 1
- Koeberlein, D. (2015). Cummins SuperTruck Program Technology and System Level Demonstration of Highly Efficient and Clean, Diesel Powered Class 8 Trucks. Annual Merit Review ACE057, 2015. Vehicle Technologies Office, DOE.
- Humphreys, H. and Bevly, D. (2016). Computational Fluid Dynamic Analysis of a Generic 2 Truck Platoon. SAE Technical Paper 2016-01-8008, 2016, doi:10.4271/2016-01-8008.
- Lammert, M.; Duran, A.; Diez, J.; Burton, K.; Nicholson A. (2015). Effect of Platooning on Fuel Consumption of Class 8 Vehicles over a Range of Speeds, Following Distances, and Mass. SAE Commercial Vehicle Engineering Conference, October 7-9, 2014. NREL/CP-5400-62348. Golden, CO: National Renewable Energy Laboratory.
- White Paper: Automate Driving and Platooning Issues and Opportunities. ATA Technology and Maintenance Council, Future Truck Program. Automated Driving and Platooning Task Force, September, 2015.