This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Turbocharger First Order Synchronous Noise and Vibrations: Predictions and Measurements
Technical Paper
2017-01-1051
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
EcoBoost engines constitute one of the strategies used by Ford Motor Company to deliver engines with improved fuel economy and performance. However, turbochargers exhibit many inherent NVH challenges that need to be addressed in order to deliver refined engines that meet customer’s expectation. One of these challenges is the turbocharger 1st order synchronous noise due to the interaction between the manufacturing tolerances of the rotating components and the dynamic behavior of the rotor.
This paper discusses an MBD/FEA/BEM based method to predict the nonlinear dynamic behavior of the rotor semi floating bearing, its impact on the bearing loads and the resulting powerplant noise due to the interaction with the turbocharger imbalance level. The MBD predictions of the bearing forces from the inner nonlinear hydrodynamic and outer semi floating squeeze damper bearings are used in an FEA/BEM analysis to predict the synchronous of turbocharger housing vibrations level and the synchronous powerplant radiated sound pressure.
Measurement data obtained for three different levels of turbocharger imbalance and for different engine conditions are presented in this paper. This data validates the analytical predictions of the rotor dynamic forces, the turbocharger housing vibrations and the powerplant radiated noise.
Recommended Content
Citation
Nehme, H. and Zouani, A., "Turbocharger First Order Synchronous Noise and Vibrations: Predictions and Measurements," SAE Technical Paper 2017-01-1051, 2017, https://doi.org/10.4271/2017-01-1051.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Zouani , A. and Hanim , S. Overview of noise and vibration in automotive engines” Int. J. Vehicle Noise and Vibration 12 2 2016 162 181
- Kelly , A. D. Rotordynamic characterization and comparison of turbocharger bearing systems 9th Int. Conference on Turbochargers and Turbocharging Techn. 325 334 2010
- Gunter , E. J. , Barrett , L. E. and Allaire , P. E. Design and Application of Squeeze Film Dampers for Turbomachinery Stabilization Proc. of the 4 th Turbomachinery Symp. 1975
- Chen , W. J. and Gunter , E. J. Introduction to Dynamics of Rotor-Bearing Systems Eigen Technologies, Inc. 2005
- Chen , W. J. and Gunter , E. J. Dynamic Analysis of a Turbocharger in Floating Bushing Bearing Int. Symposium on Stability Control of Rotating Machinery, ISCORMA-3 2005
- San Andres , L. and Kerth , J. Thermal Effects on the Performance of Floating Ring Bearings for Turbochargers Proc. IMechE, Part J: J. Eng. Tribol. 218 5 437 450 2004
- Gjika , K. and Groves , C. Nonlinear Dynamic Behavior of Rotor Bearing Systems Involving Two Hydrodynamic Oil Films in Series: Prediction and Test Application to High-Speed Turbochargers Proceedings of the 8 th Biennial ASME Conference on Engineering Systems Design and Analysis, ASME Paper No. ESDA2006-95792 2006
- Gjika , K. , Groves C. , San Andres , L. and LaRue , G. Nonlinear Dynamic Behavior of Turbocharger Rotor-Bearing Systems with Hydrodynamic Oil Film and Squeeze Film Damper in Series: Prediction and Experiment ASME Paper No, DETC2007-34136 2007
- 2012 Dynamic Analysis User’s Guide MSC Corp
- Gérard , F. , Tournour , M. , El Masri , N. , Cremers , L. Numerical Modeling of Engine Noise Radiation through the use of Acoustic Transfer Vectors - A Case Study SAE Technical Paper 2001-01-1514 2001 10.4271/2001-01-1514
- LMS Virtual Lab Rev 13.2: User manual LMS International 2013 von Estorff O.