This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Development and Application of Ring-Pack Model Integrating Global and Local Processes. Part 2: Ring-Liner Lubrication

Journal Article
2017-01-1047
ISSN: 1946-3936, e-ISSN: 1946-3944
Published March 28, 2017 by SAE International in United States
Development and Application of Ring-Pack Model Integrating Global and Local Processes. Part 2: Ring-Liner Lubrication
Sector:
Citation: Liu, Y., Li, Y., and Tian, T., "Development and Application of Ring-Pack Model Integrating Global and Local Processes. Part 2: Ring-Liner Lubrication," SAE Int. J. Engines 10(4):1969-1983, 2017, https://doi.org/10.4271/2017-01-1047.
Language: English

References

  1. Przesmitzki , S. S. V. Characterization of oil transport in the power cylinder of internal combustion engines during steady state and transient operation Ph.D. Thesis, the Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA 2008
  2. Przesmitzki , S. , Vokac , A. , and Tian , T. An Experimental Study of Oil Transport between the Piston Ring Pack and Cylinder Liner SAE Technical Paper 2005-01-3823 2005 10.4271/2005-01-3823
  3. Senzer , E. B. Oil transport inside the oil control ring grove and its interaction with surrounding areas in internal combustion engines Ph.D. Thesis, the Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA 2012
  4. Fang , T. Computations and Modeling of Oil Transport between Piston Lands and Liner in Internal Combustion Engines Master Thesis, the Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA 2014
  5. Tian , T. Dynamic Behaviors of Piston Rings and Their Practical Impact. Part 2: Oil Transport, Friction, and Wear of Ring/Liner Interface and the Effects of Piston and Ring Proc IMechE, Part J: Journal of Engineering Tribology 216 229 247 2002
  6. Richardson , D. and Borman , G. Theoretical and Experimental Investigations of Oil Films for Application to Piston Ring Lubrication SAE Technical Paper 922341 1992 10.4271/922341
  7. Tian , T. Modeling the Performance of the Piston Ring-Pack in Internal Combustion Engines Ph.D. Thesis, the Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA 1997
  8. Li , Y. , Chen , H. , and Tian , T. A Deterministic Model for Lubricant Transport within Complex Geometry under Sliding Contact and its Application in the Interaction between the Oil Control Ring and Rough Liner in Internal Combustion Engines SAE Technical Paper 2008-01-1615 2008 10.4271/2008-01-1615
  9. Chen , H. , Li , Y. , and Tian , T. A Novel Approach to Model the Lubrication and Friction between the Twin-Land Oil Control Ring and Liner with Consideration of Micro Structure of the Liner Surface Finish in Internal Combustion Engines SAE Technical Paper 2008-01-1613 2008 10.4271/2008-01-1613
  10. Liu , L. and Tian , T. A three-dimensional model for piston ring-pack dynamics and blow-by gas flow ASME 2004 Internal Combustion Engine Division Fall Technical Conference 2004
  11. Liu , L. and Tian , T. Modeling Piston Ring-Pack Lubrication With Consideration of Ring Structural Response SAE Technical Paper 2005-01-1641 2005 10.4271/2005-01-1641
  12. Mittler , R. , Mierbach , A. , and Richardson , D. Understanding the fundamentals of piston ring axial motion and twist and the effects on blow-by In ASME 2009 Internal Combustion Engine Division Spring Technical Conference 721 735 American Society of Mechanical Engineers 2009
  13. Cheng , C. , Kharazmi , A. , Schock , H , Wineland , R. , and Brombolich , L. Three-Dimensional Piston Ring-Cylinder Bore Contact Modeling Journal of Engineering for Gas Turbines and Power 137 11 2015 111505
  14. Cheng , C. , Kharazmi , A. , and Schock , H. Modeling of Piston Ring-Cylinder Bore-Piston Groove Contact SAE Technical Paper 2015-01-1724 2015 10.4271/2015-01-1724
  15. Lyubarskyy , P. , and Bartel , D. 2D CFD-model of the piston assembly in a diesel engine for the analysis of piston ring dynamics, mass transport and friction Tribology International 104 2016 352 368
  16. Baelden , C. and Tian , T. A Dual Grid Curved Beam Finite Element Model of Piston Rings for Improved Contact Capabilities SAE Int. J. Engines 7 1 156 171 2014 10.4271/2014-01-1085
  17. Baelden , C. A multi-scale model for piston ring dynamics, lubrication and oil transport in internal combustion engines Ph.D. Thesis, the Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA 2014
  18. Picard , M. , Baelden , C. , Tian , T. , Nishino , T. et al. Oil Transport Cycle Model for Rotary Engine Oil Seals SAE Int. J. Engines 7 3 1466 1476 2014 10.4271/2014-01-1664
  19. Picard , M. , Tian , T. and Nishino , T. Predicting Gas Leakage in the Rotary Engine - Part I: Apex and Corner Seals Journal of Engineering for Gas Turbines and Power 138 2016
  20. Picard , M. , Tian , T. and Nishino , T. Predicting Gas Leakage in the Rotary Engine- Part II: Side Seals and Summary Journal of Engineering for Gas Turbines and Power 138 2016
  21. Picard , M. , Tian , T. , and Nishino , T. Modeling of the Rotary Engine Apex Seal Lubrication SAE Technical Paper 2015-01-2035 2015 10.4271/2015-01-2035
  22. Liu , L. Modeling the performance of the piston ring-pack with consideration of non-axisymmetric characteristics of the power cylinder system in internal combustion engines Ph.D. Thesis, the Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA 2005
  23. Hu , Y. , Cheng , H. S. , Arai , Kobayashi, T., Y. and Aoyama , S. Numerical Simulation of Piston Ring in Mixed Lubrication - A Nonaxisymmetrical Analysis ASME Journal of Tribology 116 3 470 478 1994
  24. Greenwood , J. A. and Tripp , J. H. The contact of two nominally flat rough surfaces Proceedings of the institution of mechanical engineers 185 1 625 633 1970
  25. Chen , H. Modeling the lubrication of the piston ring pack in internal combustion engines using the deterministic method Ph.D. Thesis, the Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA 2011
  26. Liu , Y. Developing an approach utilizing local deterministic analysis to predict the cycle friction of the piston ring-pack in internal combustion engines Master Thesis, the Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA 2013
  27. Li , Y. Multiphase oil transport at complex micro geometry Ph.D. Thesis, the Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA 2011
  28. Bai , D. Modeling piston skirt lubrication in internal combustion engines Ph.D. Thesis, the Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA
  29. Totaro , P. Modeling Piston Secondary Motion, Skirt Lubrication and Applications Master Thesis, the Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA 2014

Cited By