This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Common Rail Diesel Injectors with Nozzle Wear: Modeling and State Estimation
Technical Paper
2017-01-0543
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
This study discusses model-based injection rate estimation in common rail diesel injectors exhibiting aging phenomena. Since they result in unexpected injection behavior, aging effects like coking or cavitation may impair combustion performance, which justifies the need for new modeling and estimation approaches. To predict injection characteristics, a simulation model for the bottom section of the injector is introduced, with a main focus on modeling the hydraulic components. Using rail pressure and control piston lift as inputs, a reduced model is then derived in state-space representation, which may be used for the application of an observer in hardware-in-the-loop (HIL) environments. Both models are compared and validated with experimental data, with which they show good agreement. Aging effects and nozzle wear, which result in model uncertainties, are considered using a fault model in combination with an extended Kalman filter (EKF) observer scheme. We analyze the performance of the injection rate estimate, comparing the results to simulation data with modified nozzles. Our evaluation shows that the proposed approach allows accounting in a robust manner for wear and aging effects when estimating the injection rate, demonstrating the significant benefit offered by the proposed observer.
Recommended Content
Authors
Topic
Citation
Hofmann, O., Han, S., and Rixen, D., "Common Rail Diesel Injectors with Nozzle Wear: Modeling and State Estimation," SAE Technical Paper 2017-01-0543, 2017, https://doi.org/10.4271/2017-01-0543.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Dürnholz , M. , Endres , H. , and Frisse , P. Preinjection A Measure to Optimize the Emission Behavior of DIDiesel Engine SAE Technical Paper 940674 1994 10.4271/940674
- Benajes , J. , Molina , S. , and García , J. Influence of Pre- and Post-Injection on the Performance and Pollutant Emissions in a HD Diesel Engine SAE Technical Paper 2001-01-0526 2001 10.4271/2001-01-0526
- Krogerus , T. , Hyvönen , M. , and Huhtala , K. A Survey of Analysis, Modeling, and Diagnostics of Diesel Fuel Injection Systems Journal of Engineering for Gas Turbines and Power 138 8 1 2016 10.1115/1.4032417
- Hofmann , O. , Strauß , P. , Schuckert , S. , Huber , B. et al. Identification of Aging Effects in Common Rail Diesel Injectors Using Geometric Classifiers and Neural Networks SAE Technical Paper 2016-01-0813 2016 10.4271/2016-01-0813
- Nam , K. , Yoon , M. , Park , S. , and Sunwoo , M. Development of a Sensorless Estimation Algorithm of the Injection Timing and Rate for an HSDI Common-Rail Injector JSME International Journal Series C 47 3 882 888 2004 10.1299/jsmec.47.882
- Chung , N. , Oh , B. , and Sunwoo , M. Modelling and Injection Rate Estimation of Common-Rail Injectors for Direct-Injection Diesel Engines Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 222 6 1089 1101 2008
- Hofmann , O. , Huber , B. , and Rixen , D. Robust Injection Rate Estimation in Common Rail Diesel Injectors with Nozzle Wear Proceedings of the FISITA 2016 World Automotve Congress 2016
- Huber , B. and Ulbrich , H. Simulation and Validation of a Common Rail Diesel Injector Proceedings of the Ninth International Conference on Engineering Computational Technology 2014 10.4271/2014-01-0195
- Huber , B. Dynamik von Common Rail Injektoren und Konzepte zur Detektion und Kompensation von Düsenverschleiß Verlag Dr. Hut 978-3-8439-2555-6 2016
- Pfeiffer , F. and Borchsenius , F. New Hydraulic System Modelling Journal of Vibration and Control 10 10 1493 1515 2004 10.1177/1077546304042063
- Schernewski , R. Modellbasierte Regelung ausgewählter Antriebssystemkomponenten im Kraftfahrzeug PhD thesis Universität Karlsruhe 1999
- Maybeck , P. Stochastic Models, Estimation, and Control 1 Academic press 978-0-1241-1042-7 1982 10.1109/TSMC.1980.4308494
- Anderson , B. and Moore , J. Optimal Filtering Courier Corporation 978-0-4864-3938-9 2012
- Slotine , J. and Li , W. Applied nonlinear control Prentice Hall New York 978-0-1304-0890-7 1991
- Föllinger , O. , Dörrscheidt , F. , and Klittich , M. Regelungstechnik. Einführung in die Methoden und ihre Anwendung Elitera Verlag Berlin 978-3-7785-2970-6 1978
- Kalman , R. A New Approach to Linear Filtering and Prediction Problems Journal of Basic Engineering 82 1 35 45 1960 10.1115/1.3662552
- Kailath , T. An Innovations Approach to Least-Squares Estimation-Part I: Linear Filtering in Additive White Noise IEEE Transactions on Automatic Control 13 6 646 655 1968 10.1109/TAC.1968.1099025
- Aliyu , B. , Funmilayo , A. , Osheku , C. , and Adetoro , L. Optimal Solution to Matrix Riccati Equation - For Kalman Filter Implementation INTECH Open Access Publisher 978-9-5351-0752-1 2012 10.5772/46456