This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Residual Clamping Force Estimation and Lifetime Prediction to Loosening Failure of Bolted Joints
Technical Paper
2017-01-0479
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
This investigation describes a method for estimating the absolute lock effect in bolted joint. Observation results of loosening phenomenon in industrial vehicle are analyzed for the linear relation by the proposed regression formula. Based on the relation, in early stages of the development test, the rate of clamping force decrease can be estimated accurately after prolonged operation by measuring the clamping force behavior. The tendency to decrease is observed about the depression type and working load type loosening. For evaluation design bases, the residual clamping force estimation chart is established. The L-N (Loosening Lifetime - Number of Cycles to Loosening N) diagram is proposed for the loosening lifetime prediction for working load type loosening also. Using the loosening damage (cumulative decrease of clamping force) and L-N diagram, the lifetime to loosening failure can be predicted accurately for the locking device and method as an absolute evaluation.
Recommended Content
Journal Article | Mean-Value Second-Order Saddlepoint Approximation for Reliability Analysis |
Journal Article | Methods for Analyzing Severity Mitigation in FMEA |
Technical Paper | State-of-the-Art of CMM-Coordinate Metrology in Automotive Industry |
Authors
Topic
Citation
Hareyama, S., Manabe, K., Nakashima, M., Shimodaira, T. et al., "Residual Clamping Force Estimation and Lifetime Prediction to Loosening Failure of Bolted Joints," SAE Technical Paper 2017-01-0479, 2017, https://doi.org/10.4271/2017-01-0479.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 |
Also In
References
- Hareyama , S. and Kodama , S. A Study on Confidence Limit for Two Independent Probability Variables in Engineering Problems (Applications to Limit of Transmitted Torque in Disk Clutch and Bolt Axial Tension Control) JSME International Journal (Series III) 1990 33 2 256 262
- Hareyama , S. , Manabe , K. and Nakashima , M. Improving Tightening Reliability on Bolted Joints for Calibrated Wrench Method (An Analysis on Optimum Tightening Torque by Confidence Limit Ellipse) Proceedings of ASME 2013 International Mechanical Engineering Congress & Exposition 2013 2B 12
- Hareyama , S. and Manabe , K. Advantage of Elliptical Confidence Limit Method for Bolted Joint Tightening Reliability Proceedings of ASME, IMECE2015-50729 2015 10
- Hareyama , S. , Manabe , K. , Shimodaira , T. , Naganawa , T. Experimental Study to Verify Elliptical Confidence Limit Method for Bolted Joint Tightening Proceedings of the ASME IMECE2016-66336 2016 9
- Kumar , R. Fatigue Life Estimation for Inters in Class 1 Component ASME Journal of Pressure Vessel Technology February 1998 120 81 85
- Ellis , F.V. , Sielski , D.R. , Viswanathan , R. An Improved Analytical Method for Life Prediction of Bolting ASME Journal of Pressure Vessel Technology February 2001 123 71 74
- Hareyama , S. , Manabe , K. , Shimodaira , T. and Hoshi , A. Working Load Analysis and Strength Estimation for Bolted Joints during Actual Machine Operation Proceedings of ASME, IMECE2014-39193 2014 10
- Junker , G. H. , Williams , D. A. Rules for design and calculation of high-duty bolted joints (PART ONE:BASIC DESIGN) Sub Assembly 1973 11 3 22 24
- Junker , G. New Criteria for Self-Loosening of Fasteners Under Vibration SAE Technical Paper 690055 1969 10.4271/690055
- Clark , S. and Cook , J. Vibratory Loosening of Bolts SAE Technical Paper 660432 1966 10.4271/660432
- Hongo , K. Loosening and Locking Devices of Bolt-Nut Units (in Japanese) Science of Machine 14 1 1962 231 238
- JFRI Committee for Research of Bolt Tightening 1980 A Research for Tightening Characteristics of High Strength Bolts (Report III) (in Japanese) The Japan Research Institute for Screw Thread and Fasteners(JFRI) 56
- Yamamoto , A. Loosening of Bolted-Joints (in Japanese) Fastening & Joining 2 1 5 1972
- Hareyama , S. , Hamada , H. , Ishimaru , G. Self Loosening and Strength Estimation of Bolted Joint under Machine Operation (1st Report, Absolute Estimation on the Self Loosening) (in Japanese) Transaction of JSME (Series C) 54 503 1988 1559 1563
- Hareyama , S. , Takada , R. , Shimodaira , T. , Tamura , K. , Hoshi , A. , Nakashima , M. A Proposal for the Absolute Estimation Method on Self-loosening of Bolted Joints during OFF-road Vehicle Operation International Journal of Automotive Engineering 3 1 47 53 2012
- Hareyama , S. , Manabe , K. , Nakashima , M. The Absolute Evaluation and Loosening Life Prediction Method on Self-Loosening of Bolted Joints during Actual Machine Operation ASME IMECE2012-86415 2012
- Nassar , S. , Matin , P. H. Clamp Load Loss due to Fastener Elongation Beyond its Elastic Limit ASME Journal of Pressure Vessel Technology August 2006 128 379 387
- Nassar , S. , Alkelani , A. A. Clamp Load Loss due to Elastic Interaction and Gasket Creep Relaxation in Bolted Joints ASME Journal of Pressure Vessel Technology August 2006 128 395 401
- Nassar , S. , Ganganala , M. Effect of Separating Load Eccentricity on the Clamp Load Loss in a Bolted Joint Using a Strain Hardening Model ASME Journal of Pressure Vessel Technology April 2011 133/021206 1 8
- Nassar , S. , Matin , P. H. Cumulative Clamp Load Loss Due to a Fully Reversed Cyclic Service Load Acting on an Initially Yielded Bolted Joint System ASME Journal of Mechanical Design April 2007 129 421 433
- Yamamoto , A. Loosening of Bolted-Joints and evaluation of locking effect for many kinds of locking devices (2) (in Japanese) Fastening & Technology 10 6 23 33 1969
- Kasei , S. Loosening and Locking Technology of Bolted-Joints (in Japanese) Science of Machine 37 8 21 26 1985
- Nassar , S. , Housari , B. A. Effect of Thread Pitch and Initial Tension on the Self-Loosening of Threaded Fasteners ASME Journal of Pressure Vessel Technology November 2006 128 591 598
- Yang , X , Nassar , S. , Wu , Z. and Meng , A. Nonlinear Behavior of Preloaded Bolted Joints Under a Cyclic Separating Load ASME Journal of Pressure Vessel Technology February 2012 134/011206 1 9
- Mao , J. and Nassar , S. Assessment of Different Joining Techniques for Dissimilar Materials SAE Technical Paper 2014-01-0790 2014 10.4271/2014-01-0790
- Kumakura , S. , Hosokawa , S. and Sawa , T. Bolt Load Reduction of Bolted Joints under External Axial Load ASME PVP (Pressure Vessels and Piping) 367 103 108 1998
- Sase , N. , Koga , S. , Nishimura , K. and Fujii , H. Evaluation of Anti-Loosening Nuts for Screw Fastener Journal of Material Processing Technology 56 1/4 321 332 1996
- Zhao , Y. , Lee , C. , Che , X. and Yee , C. Prediction of Stabilizer Bar Retention Bracket Bolt Looseness ASME PVP (Pressure Vessels and Piping) 382 161 167 1999