This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Simulation and Experiment of Characteristics of Transmitted Torque of Dry Clutch Engagement
Technical Paper
2017-01-0402
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
Based on the formation mechanism of engaging force of clutch, the engagement was divided into four stages: idle stage, cushion spring stage, diaphragm spring stage and locked stage. The mechanism of transmitted torque in each stage was analyzed and the transmitted torque model of clutch was deduced. Multi-load step analysis method based on finite element was used to analyze the coupling load-deformation characteristics of diaphragm spring and cushion spring in engagement, and the change laws of engaging force, diaphragm spring force and release bearing force were achieved and their coupling interaction were studied. And then change of friction coefficient of clutch with oscillating temperature was measured on friction test rig, and effect of temperature on transmitted torque was further discussed. Finally, simulation results of transmitted torque were validated by the experiment. Results indicate that the transmitted torque in clutch engagement has a nonlinear characteristic. The transmitted torque is increased slowly in the initial stage of engagement and has an approximate linear increase in the middle and late stage of engagement. And the transmitted torque increases first and then decreases with the rise of temperature in friction pairs, and effect of temperature on transmitted torque in the diaphragm spring stage is more obvious than the cushion spring stage.
Recommended Content
Authors
Topic
Citation
Zhang, Z., Xiaohui, S., and Bin, Y., "Simulation and Experiment of Characteristics of Transmitted Torque of Dry Clutch Engagement," SAE Technical Paper 2017-01-0402, 2017, https://doi.org/10.4271/2017-01-0402.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- Ye M , Qin D T , Liu Z J Shift performance control for mild hybrid electric vehicle equipped with automatic manual transmission [J] Chinese Journal of Mechanical Engineering 2009 45 3 108 114
- Yang W B , Wu G Q , Qin D T Drive line system modeling and shift characteristic of dual clutch transmission powertrain[J] Chinese Journal of Mechanical Engineering 2007 43 7 188 194
- Cao G J , Ge A L , Zheng L Clutch engagement control during gear shifting process in automated manual transmission[J] Chinese Journal of Mechanical Engineering 2005 41 12 234 238
- Qin D T , Chen Q H Universal clutch starting control of AMT/ DCT automatic transmission based on optimal control[J] Chinese Journal of Mechanical Engineering 2011 47 12 85 91
- Van A C , Serrarens A F , Camlibel M K , Hybrid optimal control of dry clutch engagement[J] International Journal of Control 2007 80 11 1717 1728
- Mohamed H , Mohd S C , Kamarul B T , Electromechanical friction clutch(EMFC) controller development for automotive application[J] Lecture Notes in Engineering and Computer Science 2010 2184 1 1642 1647
- Amisano F , Ercole G , Mattiazzo G , The Influence of the push-plate mechanical characteristic on torque transmissibility in diaphragm spring clutches[J] Proc of 2002 AIMETA International Tribology Conf 2002 Salerno, Italy
- Glielmo L , Gutman P O , Iannelli L , Robust smooth engagement of an automotive dry clutch[J] Proc of 4th IFAC Symposium on Mechatronic Systems Heidelberg, Germany 2006 632 637
- Wang Y H , Song J , Li X K Modeling and simulation of clutch dynamic process[J] Journal of Highway and Transportation Research and Development 2004 24 10 121 125
- Hu J J , Li G H , Wu G Q , Accurate calculation of clutch torque transmission during vehicle starting[J] Automotive Engineering 2008 30 12 1083 1086
- Qin D T , Zhao Y S , Hu J J , Analysis of shifting control for dry dual clutch system[J] Journal of Chongqing University 2009 32 9 1016 1023
- Ercole , G. , Mattiazzo , G. , Mauro , S. , Velardocchia , M. Experimental Methodologies To Determine Diaphragm Spring Clutch Characteristics SAE Technical Paper 2000-01-1151 2000 10.4271/2000-01-1151
- Glielmo L , Iannelli L , Vacca V , Speed control for automated manual transmission with dry clutch[J] Proc of the 43rd IEEE Conf on Decision and Control Dec 14-17 2004 1709 1714
- Vasca F , Iannelli L , Senatore A , Modeling torque transmissibility for automotive dry clutch engagement[J] Proc of American Control Conf Seattle, WA 2008 306 311
- Velardocchia , M. , Amisano , F. , and Flora , R. A Linear Thermal Model for an Automotive Clutch SAE Technical Paper 2000-01-0834 2000 10.4271/2000-01-0834