Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Analysis of Tool Wear for Trimming of DP980 Sheet Metal Blanks

Journal Article
2017-01-0302
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2017-01-0302
Published March 28, 2017 by SAE International in United States
Analysis of Tool Wear for Trimming of DP980 Sheet Metal Blanks
Sector:
Citation: Nasheralahkami, S., Golovashchenko, S., Dawson, S., and Sohmshetty, R., "Analysis of Tool Wear for Trimming of DP980 Sheet Metal Blanks," SAE Int. J. Engines 10(2):233-238, 2017, https://doi.org/10.4271/2017-01-0302.
Language: English

References

  1. Demeri , M. Y. 2006 Forming of Advanced High Strength Steels, ASM Handbook 14B Metalworking: Sheet Forming Semiatin , S. L. ASM International, Materials Park OH. USA
  2. Keeler , S. and Kimchi , M. Advanced High-Strength Steels Application Guidelines: Version 5.0 World Auto Steel Association 2014
  3. Tamarelli , C. M. AHSS 101: The Evolving Use of Advanced High-Strength Steels for Automotive Applications Steel Market Development Institute Southfield, MI, USA 2011
  4. Choi , H. S. , Kim , B. M. and Ko , D. C. Effect of Clearance and Inclined Angle on Sheared Edge and Tool Failure in Trimming of DP980 Sheet Journal of Mechanical Science and Technology 28 6 2319 2328 2014 10.1007/s12206-014-0522-7
  5. Wang , W. R. , He , C. W. , Zhao , Z. H. and Wei , X. C. The Limit Drawing Ratio and Formability Prediction of Advanced High Strength Dual-Phase Steels Materials and Design 32 3320 3327 2011 10.1016/j.matdes.2011.02.021
  6. Ingarao , G. , Lorenzo , R. D. , and Micari , M. Analysis of Stamping Performances of Dual Phase Steels: A Multiobjective Approach to Reduce Springback and Thinning Failure Materials and Design 30 4421 4433 2009 10.1016/j.matdes.2009.04.001
  7. Husson , C. , Correia , J. P. M. , Daridon , L. and Ahzi , S. Finite Elements Simulations of Thin Copper Sheets Blanking: Study of Blanking Parameters on Sheared Edge Quality Journal of Materials Processing Technology 199 74 83 2008 10.1016/j.jmatprotec.2007.08.034
  8. Altan , T. and Tekkaya , A. E. Sheet Metal Forming; Processes and Applications ASM International, Materials Park OH. USA 2012 978-1615038442
  9. Golovashchenko , S. F. Robust Trimming of Automotive Panels Materials Science Forum 539-543 423 428 2007 10.4028/www.scientific.net/MSF.539-543.423
  10. Golovashchenko , S. F. A Study on Trimming of Aluminum Autobody Sheet and Development of a New Robust Process Eliminating Burrs and Slivers International Journal of Mechanical Sciences 48 1384 1400 2006 10.1016/j.ijmecsci.2006.07.007
  11. Sartkulvanich , P. , Kroenauer , B. , Golle , R. , Konieczny , A. and Altan , T. Finite Element Analysis of the Effect of Blanked Edge Quality upon Stretch Flanging of AHSS CIRP Annals -Manufacturing Technology 59 279 282 2010 10.1016/j.cirp.2010.03.108
  12. Le , Q. B. , deVries , J. A. , Golovashchenko , S. F. and Bonnen J. J. F. Analysis of Sheared Edge Formability of Aluminum Journal of Materials Processing Technology 214 876 891 2014 10.1016/j.jmatprotec.2013.11.021
  13. Ilinich , A. M. , Golovashchenko , S. F. and Smith , L. M. Material Anisotropy and Trimming Method Effects on Total Elongation in DP500 Sheet Steel Journal of Materials Processing Technology 211 441 449 2011 10.1016/j.jmatprotec.2010.10.014
  14. Wua , X. , Bahmanpoura , H. and Schmid , K. Characterization of Mechanically Sheared Edges of Dual Phase Steels Journal of Materials Processing Technology 212 1209 1224 2012 10.1016/j.jmatprotec.2012.01.006
  15. Hilditch , T. B. and Hodgson , P. D. Development of the Sheared Edge in the Trimming of Steel and Light Metal Sheet; Part 1-Experimental Observations Journal of Materials Processing Technology 169 184 191 2005 10.1016/j.jmatprotec.2005.02.266
  16. Weaver , H. P. , and Weinmann , K. J. A Study of Edge Characteristics of Sheared and Bent Steel Plate Journal of Applied Metalworking 3 4 381 390 1985 10.1007/BF02833660
  17. Li , M. An Experimental Investigation on Cut Surface and Burr in Trimming Aluminum Autobody Sheet International Journal of Mechanical Sciences 42 889 906 2000 10.1016/S0020-7403(99)00033-8
  18. Chintamani , J. and Sriram , S. Sheared Edge Characterization of Steel Products used for Closure Panel Applications SAE Technical Paper 2006-01-1589 2006 10.4271/2006-01-1589
  19. Konieczny , A. and Henderson , T. On Formability Limitations in Stamping Involving Sheared Edge Stretching SAE Technical Paper 2007-01-0340 2007 10.4271/2007-01-0340
  20. Karelova , A. , Krempaszky , C. , Werner , E. , Tsipouridis , P. , Hebesberger , T. and Pichler , A. Hole Expansion of Dual-phase and Complex-phase AHS Steels - Effect of Edge Conditions Steel Research International 80 1 71 77 2009 10.2374/SRI08SP110
  21. Mori , K. , Maeno , T. and Fuzisaka , S. Punching of Ultra-High Strength Steel Sheets using Local Resistance Heating of Shearing Zone Journal of Materials Processing Technology 212 534 540 2012 10.1016/j.jmatprotec.2011.10.021
  22. Chiriac , C. and Shi , M. Experimental Study of Edge Stretching Limits of DP980IBF Steel in Multistage Forming Process SAE Int. J. Mater. Manf. 8 2 415 418 2015 10.4271/2015-01-0525
  23. Golovashchenko , S. F. and Ilinich , A. M. Trimming Of Advanced High Strength Steels 2005 ASME International Mechanical Engineering Congress Orlando, FL, USA Nov 13-18, 2005
  24. Wang , J. , Link , T. M. , and Merwin , M. J. AHSS Edge Formability in Sheared-Edge Tension International Conference on New Developments in Advanced High-Strength Sheet Steels 361 366 2008
  25. Nasheralahkami , S. , Golovashchenko , S. , Pan , K. , Brown , L. et al. Characterization of Trimmed Edge of Advanced High Strength Steel SAE Technical Paper 2016-01-0358 2016 10.4271/2016-01-0358
  26. Makich , H. , Carpentier , L. , Monteil , G. , Roizard , X. , Chambert , J. and Picart , P. Metrology of the burr amount - correlation with blanking operation parameters (blanked material - wear of the punch) International Journal of Material Forming 1 1 1243 1246 2008 10.1007/s12289-008-0167-0
  27. Luo , S. Y. Studies on the wear conditions and the sheared edges in punching Wear 208 81 90 1997
  28. Luo , S. Y. Effect of the Geometry and the Surface Treatment of Punching Tools on the Tool Life and Wear Conditions in the Piercing of Thick Steel Plate Journal of Materials Processing Technology 88 1-3 122 133 1999 10.1016/S0043-1648(96)07439-X
  29. Hernández , J. J. , Franco , P. , Estrems , M. , and Faura , F. Modelling and experimental analysis of the effects of tool wear on form errors in stainless steel blanking Journal of Materials Processing Technology 180 1-3 143 150 2006 10.1016/j.jmatprotec.2006.05.015

Cited By

Recommended Content

Technical Paper Zebra Line Laser Heat Treated Die Development
Technical Paper Sheared Edge Stretchability of Steels Suitable for Automotive Applications
Technical Paper Phosphate Uniformity of Aluminum Closure Sheet