This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Interior Noise Analysis of a Commercial Vehicle Cab by Using Finite Element Method and Boundary Element Methods
Technical Paper
2016-01-8051
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In order to predict the interior noise of a commercial vehicle cab, a finite element model of a heavy commercial vehicle cab was established. An acoustic-structure coupling model of the cab was built based on experimentally validated structure model and acoustic model of a commercial vehicle cab. Moreover, based on the platform of Virtual. Lab, the acoustic field modes of the acoustic model of the commercial vehicle cab and the coupled modes of the acoustic-structure coupling model were analyzed by using the acoustic-structure coupling analysis technique. The excitation of the vehicle cab was tested at an average speed on an asphalt road. Then, the interior noise of the heavy commercial vehicle cab was predicted based on FEM-FEM method and FEM-BEM method with all the parameters and excitation. Furthermore, the predicted interior noise of the commercial vehicle cab was compared with the tested interior noise. The comparison showed that FEM-BEM method was more efficient than FEM-FEM method to predict the interior noise of the commercial vehicle cab.
Authors
Citation
Zhang, J., Chen, S., and Wang, D., "Interior Noise Analysis of a Commercial Vehicle Cab by Using Finite Element Method and Boundary Element Methods," SAE Technical Paper 2016-01-8051, 2016, https://doi.org/10.4271/2016-01-8051.Also In
References
- Dhandole , S. D. , and Modak S. V. Review of vibro-acoustics analysis procedures for prediction of low frequency noise inside a cavity Proceedings of the Conference & Exposition on Structural Dynamics Orlando, FL, USA 2007
- Ohayon R. Linear vibrations of structures coupled with an internal fluid Eccomas School. 2006 3 7
- LIU P. , LIU G. , WU L. et al. The Application of FEM-BEM Method in the Analysis of Truck Cab Acoustics Noise and Vibration Control 2005 3 008
- Han , Xin Coupling of Structural Dynamic and Acoustic Analyses Using the FEM and BEM University of Cincinnati 2012
- Marburg. , Steffen ., and Bodo Nolte Computational acoustics of noise propagation in fluids: finite and boundary element methods 3 New York Springer 2008
- Maressa A. , Jonckheere S. , Van Genechten B. et al. Hybrid Finite Element-Wave Based techniques for interior vibroacoustics. Application to a large-sized vehicle model Proceedings of the 25th Conference on Noise and Vibration Engineering (ISMA2012) 2012 25 3937 3950
- Lalor N. , Priebsch H H. The prediction of low-and mid-frequency internal road vehicle noise: a literature survey Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 2007 221 3 245 269
- Seybert. , A. F. , Wu T. W. , and Wu X. F. Experimental Validation of Finite Element and Boundary Element Methods for Predicting Structural Vibration and Radiated Noise No. E-8264 KENTUCKY UNIV LEXINGTON 1994
- Swenson , George W. , White Michael J. , and Oelze , Michael L. Low-frequency sound wave parameter measurement in gravels Applied Acoustics 71.1 2010 45 51
- Uehara , H , Saito , M , Koizumi , T , Tsujiuchi , N et al. Application of Inverse Boundary Element Method to Vibration Identification of Co-generation System SAE Technical Paper 2007-32-0104
- Feng , Jinlong et al. Low-frequency acoustic-structure analysis using coupled FEM-BEM method Mathematical Problems in Engineering 2013 2013
- Cheer , Jordan ., and Stephen J. , and Elliott The effect of structural-acoustic coupling on the active control of noise in vehicles 2011 3206 3213
- Kruntcheva M R. Acoustic-Structural Coupling of the Automobile Passenger Compartment World Congress on Engineering 2007 1236 1241
- Chen , Leilei ., Haibo Chen ., and Changjun Zheng FEM/ACABEM COUPLING FOR STRUCTURAL-ACOUSTIC DESIGN SENSITIVITY ANALYSIS The 21 International Congress on Sound and Vibration 2014 13 17
- Gaul , Lothar ., and Michael Junge Acoustic-structure simulation of exhaust systems by coupled FEM and fast BEM Proceedings IMAC-XXV Conference & Exposition on Structural Dynamics: CD-ROM 2007
- Elwali. , Wael ., Mingfeng Li ., and Lim. Teik C. Vehicle interior noise transfer function predictions applying semi-analytical, finite element and boundary element approaches International Journal of Vehicle Noise and Vibration 7.2 2011 91 108
- Ahlquis. t , Javier RodrÃguez ., Pierre Huguenet ., and Higueras J. I. Coupled FEM/BEM Vibroacoustic Modeling of Turbopropeller Cabin Noise 16th AIAA/CEAS Aeroacoustics Conference 2010
- Johnson. , W. M. , and Cunefare K. A. Structural acoustic optimization of a composite cylindrical shell using FEM/BEM Journal of vibration and acoustics 124.3 2002 410 413
- Wang Y , Zhang J R , Liu X B et al. Interior Acoustic Field Analysis of Hydraulic Excavator’s Cabin Based on BEM Applied Mechanics and Materials 2012 141 323 327
- Chen , S. , Wang , D. , Song , J. , Tan , G. et al. Interior Noise Prediction and Analysis of Heavy Commercial Vehicle Cab SAE Technical Paper 2011-01-2241 2011 10.4271/2011-01-2241
- Peng LIU et al. The Application of FEM-BEM Method in the Analysis of Truck Cab Acoustics Noise and Vibration Control 3 2005 008
- Mohanty. , Amiya R. , Pierre Barry D. St ., and Suruli-Narayanasami P. Structure-borne noise reduction in a truck cab interior using numerical techniques Applied Acoustics 59.1 2000 1 17
- Yuksel. , Erdem ., Gulsen Kamci ., and Ipek Basdogan Vibroacoustic analysis of a vehicle integrated with design of experiments methodology using three performance criteria Proceedings of 20 th International Congress on Acoustics, ICA 2010 Sdyney, Australia 2010
- Zhongming , Xu et al. Study on Interior Acoustic Characteristics of Light Commercial Vehicle Cab Journal of Chongqing University of Technology, Natural Science 2010 01