This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Current Challenges and Frontiers for the EHD Simulation of Journal Bearings: a Review
Technical Paper
2016-01-1856
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Elastohydrodynamic (EHD)-simulation is a widely applied simulation technique that is used in a very diverse field of applications ranging from the study of vibroacoustics to the calculation of friction power losses in lubricated contacts. In particular, but not limited to, the automotive industry, technical advances and new requirements put current EHD simulation methodology under test. Ongoing trends like downsizing, downspeeding, start-stop and the continuing demand for increasing fuel efficiency impose new demands and challenges also on the simulation methodology. Increasing computational capabilities enable new simulation opportunities on the other hand.
In the following, an overview is given on the current state of the art and today’s challenges for the elastohydrodynamic simulation of journal bearings and their wide range of applications from highly loaded main bearings supporting the crank shaft in the ICE to high speed turbocharger bearings.
The topics addressed in this work span a wide range from mixed lubrication, low viscosity lubricants, polymer coatings, microstructured surfaces to the simulation of the thermal behavior and the simulation of hydraulically coupled journal bearings as they are commonly present in internal combustion engines.
Recommended Content
Authors
Topic
Citation
Allmaier, H. and Offner, G., "Current Challenges and Frontiers for the EHD Simulation of Journal Bearings: a Review," SAE Technical Paper 2016-01-1856, 2016, https://doi.org/10.4271/2016-01-1856.Also In
References
- Krampl , H. Numerische und versuchstechnische Beurteilung geschmierter Kontakte inhomogener Werkstoffe PhD thesis Montanuniversität Leoben 2012
- Arnold , M. , Schiehlen , W. Simulation Techniques for Applied Dynamics Springer 2008
- Donea , J. Finite element methods for flow problems John Wiley & Sons Ltd. 2003
- Salvetti , M. V. Fluid dynamics of cavitation and cavitating turbopumps Springer 2007
- Schratt , W. , Simmchen E. , Zouhar , G. Konstruktionswerkstoffe des Maschinen- und Anlagenbaus Wiley 1998
- Holmberg , K. , Andersson , P. , Nylund , N. O. , Mäkelä , K. , Erdemir , A. Global energy consumption due to friction in trucks and buses Tribology International 78 94 114 2014
- Covitch , M. , Brown , M. , May , C. , Selby , T. et al. Extending SAE J300 to Viscosity Grades below SAE 20 SAE Int. J. Fuels Lubr. 3 2 1030 1040 2010 10.4271/2010-01-2286
- Macián , V. , Tormos , B. , Ruiz , S. , Miró , G. Low viscosity engine oils: Study of wear effects and oil key parameters in a heavy duty engine fleet test Tribology International 94 240 248 2016
- Macián , V. , Tormos , B. , Bermúdez , V. , Ramírez , L. Assessment of the effect of low viscosity oils usage on a light duty diesel engine fuel consumption in stationary and transient conditions Tribology International 79 132 139 2014
- Allmaier , H. , Priestner , C. , Reich , F. M. , Priebsch , H. H. , Forstner , C. , Novotny-Farkas , F. Predicting friction reliably and accurately in journal bearings - The importance of extensive oil-models Tribology International 48 93 101 2012
- Allmaier , H. , Priestner , C. , Six , C. , Priebsch , H. H. , Forstner , C. , Novotny-Farkas , F. Predicting friction reliably and accurately in journal bearings-A systematic validation of simulation results with experimental measurements Tribology International 44 1151 1160 2011
- Sander , D. E. , Allmaier , H. , Priebsch , H. H. , Reich , F. M. , Witt , M. , Füllenbach , T. , Skiadas , A. , Brouwer , L. , Schwarze , H. Impact of high pressure and shear thinning on journal bearing friction Tribology International 81 29 37 2015
- Knauder , C. , Allmaier , H. , Sander , D. E. , Salhofer , S. , Reich , F. M. , Sams , T. Analysis of the Journal Bearing Friction Losses in a Heavy-Duty Diesel Engine Lubricants 3 142 154 2015
- Carden , P. , Pisani , C. , Lainé , E. , Field , I. , Devine , M. , Schoeni , A. , Beyer , P. Calculation of crank train friction in a heavy duty truck engine and comparison with measured data Proceedings of the institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 227 2 168 184 2012
- Carden , P. , Pisani , C. , Andersson , J. , Field , I. et al. The Effect of Low Viscosity Oil on the Wear, Friction and Fuel Consumption of a Heavy Duty Truck Engine SAE Int. J. Fuels Lubr. 6 2 311 319 2013 10.4271/2013-01-0331
- Bair , S. High pressure rheology for quantitative elastohydrodynamics Elsevier 2007 978-0-444-52243-6
- Bair , S. The shear rheology of thin compressed liquid films Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 216 1 1 17 2002
- Bair , S. Measurements of real non-Newtonian response for liquid lubricants under moderate pressures Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 215 3 223 33 2001
- Bobzin , K. , Brögelmann , T. Minimizing frictional losses in crankshaft bearings of automobile powertrain by diamond-like carbon coatings under elastohydrodynamic lubrication Surface & Coatings technology 2015 10.1016/j.surfcoat.2015.08.064
- Allmaier , H. , Sander , D. E. , Priebsch , H. H. , Witt , M. , Füllenbach T. , Skiadas , A. Non-Newtonian and running-in wear effects in journal bearings operating under mixed lubrication Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 230 2 135 142 2015
- Sander , D. E. , Allmaier , H. , Priebsch , H. H. , Reich , F. M. , Witt , M. , Skiadas , A. , Knaus , O. Edge loading and running-in wear in dynamically loaded journal bearings Tribology International 92 395 403 2015
- Offner , G. , Knaus , O. A generic friction model for radial slider bearing simulation considering elastic and plastic deformation Lubricants 3 522 538 2015
- Ligier , J. L. , Noel , B. Friction reduction and reliability for engines bearings Lubricants 3 569 596 2015
- Lu , X. , Khonsari , M. M. An experimental investigation of dimple effect on the Stribeck curve of journal bearings Tribology Letters 27 169 176 2007
- Dadouche , A. , Conlon , M. J. , Dmochowski , W. , Koszela , W. , Galda , L. , Pawlus , P. Effect of Surface Textruing on the Steady-State Properties and Dynamic Coefficients of a Plain Journal Bearing: Experimental Study ASME Proceedings Structures and Dynamics, GT2011-46804 695 704 2011
- Dadouche , A. , Conlon , M. J. Operational performance of textured journal bearings lubricated with a contaminated fluid Tribology International 93 377 389 2016
- Gropper , D. , Wang , L. , Harvey , T. J. Hydrodynamic lubrication of textured surfaces: a review of modeling techniques and key findings Tribology International 94 509 529 2016
- Zhang , J. , Meng , Y. Direct observation of cavitation phenomenon and hydrodynamic lubrication analysis of textured surfaces Tribology Letters 46 147 158 2012
- Qiu , Y. , Khonsari , M. M. Experimental investigation of tribological performance of laser textured stainless steel rings Tribology International 44 635 644 2011
- Bishop , J. , Nedungadi , A. , Ostrowski , G. , Surampudi , B. et al. An Engine Start/Stop System for Improved Fuel Economy SAE Technical Paper 2007-01-1777 2007 10.4271/2007-01-1777
- Sander , D. E. , Allmaier , H. , Priebsch , H. H. , Witt , M. , Skiadas , A. Simulation of journal bearing friction in severe mixed lubrication - Validation and effect of surface smoothing due to running-in Tribology International 96 173 183 2016
- Braun M. J. , and Hannon , W. M. Cavitation formation and modelling for fluid film bearings: A review Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224 839 863 2010
- Meng , F. , Wei , Z. , Minggang , D. , Gao , G. Study of acoustic performance of textured journal bearing Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 230 156 169 2015 10.1177/1350650115594406
- Henry , Y. , Bouyer , J. , Fillon , M. An experimental analysis of the hydrodynamic contribution of textured thrust bearings during steady-state operation: A comparison with the untextured parallel surface configuration Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229 362 375 2015 10.1177/1350650114537484
- Costa , H. L. , Hutchings , I. M. Some innovative surface texturing techniques for tribological purposes Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229 429 448 2015 10.1177/1350650114539936
- Woloszynski , T. , Podsiadlo , P. , Stachowiak , G. W. Evaluation of discretization and integration methods for the analysis of finite hydrodynamic bearings with surface texturing Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229 465 477 2015 10.1177/1350650114544711
- Silva , C. , Ross , M. , Farias , T. Analysis and simulation of “low-cost” strategies to reduce fuel consumption and emissions in conventional gasoline light-duty vehicles Energy Conversion and Management 50 2 215 222 2009
- Fonseca , N. , Casanova , J. , Valdés , M. Influence of the stop/start system on CO2 emissions of a diesel vehicle in urban traffic Transportation Research Part D: Transport and Environment 16 2 194 200 2011
- George , J. and Brock , R. Polymeric Engine Bearings for Hybrid and Start Stop Applications SAE Technical Paper 2012-01-1966 2012 10.4271/2012-01-1966
- Ferreira , M. , Silva , A. , Praça , M. , and Costa , S. Polymeric Coated Lead Free Bronze Bearings for High Durability in Medium Duty Diesel Engines SAE Technical Paper 2014-36-0405 2014 10.4271/2014-36-0405
- Mokhtar , M. O. A. , Howarth , R. B. , Davies , P. B. Wear Characteristics of Plain Hydrodynamic Journal Bearings During Repeated Starting and Stopping Tribology Transactions 20 3 191 194 1977 10.1080/05698197708982833
- Roberts , A. , Brooks , R. , Shipway , P. Internal combustion engine cold-start efficiency: A review of the problem, causes and potential solutions Energy Conversion and Management 82 327 350 2014
- Zammit , J. , Shayler , P. , Gardiner , R. , and Pegg , I. Investigating the Potential to Reduce Crankshaft Main Bearing Friction During Engine Warm-up by Raising Oil Feed Temperature SAE Int. J. Engines 5 3 1312 1319 2012 10.4271/2012-01-1216
- Zammit , J. Managing engine thermal state to reduce friction losses during warm-up PhD thesis University of Nottingham 2012
- Addison , J. E. The benefits of thermal management to reduce friction losses in engines PhD thesis University of Nottingham 2015
- Allmaier , H. , Priestner , C. , Reich , F. M. , Priebsch , H. H. , Novotny-Farkas , F. Predicting friction reliably and accurately in journal bearings-extending the EHD simulation model to TEHD Tribology International 58 20 28 2013
- Piffeteau , S. , Souchet , D. , Bonneau , D. Influence of Thermal and Elastic Deformations on Connecting-Rod Big End Bearing Lubrication Under Dynamic Loading Journal of Tribology 122 1 181 191 1999 10.1115/1.555341
- Wang , Y. , Zhang , C. , Wang , Q. , Lin , C. A mixed-TEHD analysis and experiment of journal bearings under severe operating conditions Tribology International 35 6 395 407 2002
- Honda , A. , Murakami , M. , Kimura , Y. , Ashihara , K. et al. Research into Engine Friction Reduction under Cold Conditions - Effect of Reducing Oil Leakage on Bearing Friction SAE Int. J. Fuels Lubr. 7 2 616 622 2014 10.4271/2014-01-1662
- Lorenz , N. , Offner , G. , Knaus , O. Fast thermo-elastohydrodynamic modeling approach for mixed lubricated journal bearings in internal combustion engines Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229 8 962 976 2015
- Shahmohamadi , H. , Rahmani , R. , Rahnejat , H. , Garner , C. P. , Dowson , D. Big End Bearing Losses with Thermal Cavitation Flow Under Cylinder Deactivation Tribology Letters 57 2 1 17 2015 10.1007/s11249-014-0444-7
- Mohammadpour , M. , Rahmani , R. , and Rahnejat , H. The Effect of Cylinder De-Activation on Thermo-Friction Characteristics of the Connecting Rod Bearing in the New European Drive Cycle (NEDC) SAE Technical Paper 2014-01-2089 2014 10.4271/2014-01-2089
- Mohammadpour , M. , Rahmani , R. , Rahnejat , H. Effect of cylinder deactivation on the tribo-dynamics and acoustic emission of overlay big end bearings Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multibody Dynamics 228 2 138 151 2014
- Estupinan , E. , Santos , I. Controllable Lubrication for Main Engine Bearings Using Mechanical and Piezoelectric Actuators Mechatronics, ASME Transactions on Mechatronics 17 2 279 287 2012
- Gudin , D. , Mian , O. , Sanders , S. Experimental measurement and modelling of plain bearing wear in start-stop applications Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 227 5 433 446 2013 10.1177/1350650112471287
- Bartel , D. Simulation von Tribosystemen Vieweg+Teubner 2010
- Booker , J. F. , Boedo , S. , Bonneau , D. Conformal elastohydrodynamic lubraction analysis for engine bearing design: a brief review Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 224 2648 2653 2010
- Ebrat , O. , Mourelatos , Z. P. , Vlahopoulos , N. , Vaidyanathan , K. Calculation of Journal Bearing Dynamic Characteristics Including Journal Misalignment an Bearing Structural Deformation Tribology Transactions 47 1 94 102 2004
- Kim , T.-J. , Han , J.-S. Comparison of the Dynamic Behavior and Lubrication Characteristics of a Reciprocating Compressor Crankshaft in Both Finite and Short Bearing Models Tribology Transactions 47 1 61 69 2010
- Bartel , D. , Bobach , L. , Illner , T. , Deters , L. Simulating transient wear characteristics of journal bearings subjected to mixed friction Proceedings of the institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 226 12 1095 1108 2012
- Illner , T. , Bartel , D. , Deters , L. Determination of the transition speed in journal bearings under consideration of bearing deformation Tribology International 82 58 67 2015
- Lang , J. , Knoll , G. , Thornthwaite , J. , Soteriou , C. , Lensch-Franzen , C. , Kronstedt , M. Simulation Methods for Elastohydrodynamically Coupled Hydraulic Components 9th International Fluid Power Conference Aachen 2014
- Offner , G. , Diwoky , F. , Schweiger , C. , Baier , W. Coupled Oil Film Lubricated Contact Simulation for ICEs Proceedings of the institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 227 5 447 458 2013
- Knoll , G. , Seemann , W. , Proppe , C. , Koch , R. , Backhaus , K. , Boyaci , A. Hochlauf von Turboladerrotoren in nichtlinear modellierten Schwimmbuchsenlagern Motortechnische Zeitschrift 71 4 280 285 2010
- Wilcutts , M. , Switkes , J. , Shost , M. , Tripathi , A. Design and Benefits of Dynamic Skip Fire Strategies for Cylinder Deactivated Engines SAE Technical Paper 2013-01-0359 2013 10.4271/2013-01-0359
- Summer , F. , Grün , F. , Godor , I. , Offenbecher , M. , Lainé , E. Tribometric performance of polymer overlays by contrast with other bearing materials Proceedings of Symposium 2014 -Tribologie in Industrie und Forschung 159 166 2014
- Tucher , P. G. , Keogh , P. S. A generalized computational fluid dynamics approach for journal bearing performance prediction Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 209 2 99 108 1995
- Smolik , L. , Rendlova , Z. , Byrtus , M. An Analysis of the Influence of the Titanium Compressor Wheel on the Dynamical Properties of the Particular Turbocharger Rotor Manufacturing Technology 15 1 93 99 2015
- Smolik , L. , Hajzman , M. , Byrtus , M. Effects of journal bearing clearance on rotordynamics of turbochargers 11th International Conference on Engineering Vibration Ljubljana 2015
- Chun , S., M. Network Analysis of an Engine Lubrication System Tribology International 36 609 617 2003
- Yuan , Y. , Tao , W. , Liu , E. A. , Barber , G. C. , Zou , Q. , Guessous , L. Engine Lubrication System Analysis by Considering Aeration and Cavitation within the Rotating Oil Supply Passage Tribology Transactions 50 39 49 2007
- Soltani , R. , Ghorbanian , J. A New Approach to Flow Network Analysis of an Engine Lubrication System Journal of Engine Research 18 12 19 2010
- Priebsch , H. H. , Krasser , J. Simulation of the oil film behaviour in elastic engine bearings considering pressure and temperature dependent oil viscosity Tribology Series 32 651 659 1997
- Dowson , D. , Higginson , G. R. A numerical solution to the elastohydrodynamic problem Journal of Mechanical Engineering Science 1 6 15 1959
- Greenwood , J. A. , Tripp , J. H. The contact of two nominally flat rough surfaces Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 185 625 633 1970 1971
- Hagemann , T. , Kukla , S. , Schwarze , H. Measurement and prediction of the static operating conditions of a large turbine tilting-pad bearing under high circumferential speeds and heavy loads Proceedings of the ASME Turbo Expo, ASME Paper GT2013-95004 2013
- Vetter , D. , Hagemann , T. , Schwarze , H. Predictions for run-up procedures of automotive turbochargers with full-floating ring bearings including thermal effects and different bearing setups Proceedings of 11th International Conference on Turbochargers and Turbocharging 2014
- Xu , H. Elastohydrodynamic Lubrication in Plain Bearings Elastohydrodynamics - fundamentals and applications in lubrication and traction 641 650 1997
- Bobach , L. Simulation dynamisch belasteter Radialgleitlager unter Mischreibungsbedingungen PhD thesis Otto-von-Guericke-Universität Magdeburg 2008
- Andres , L., S. , Barbarie , V. , Bhattacharya , A. , Gjika , K. On the Effect of Thermal Energy Transport to the Performance of (Semi) Floating Ring Bearing Systems for Automotive Turbochargers Journal of Engineering for Gas Turbines and Power 134 10 102507 1 10 2012
- Porzig , D. , Raetz , H. , Schwarze , H. , Seume , J. R. Thermal analysis of small high-speed floating-ring journal bearings Proceedings of 11th International Conference on Turbochargers and Turbocharging 2014
- Profito , F. J. , Zachariadis , D. C. Partitioned fluid-structure methods applied to the solution of elastohydrodynamic conformal contacts Tribology International 81 321 332 2015
- Steinbatz , M. EHD-Contact in Engine Simulations using a Modal Force Approach in Commercial Multi-Body Simulation Software SAE Technical Paper 2010-32-0034 2010 10.4271/2010-32-0034
- Stefani , F. A. , Rebora , A., U. A Nonlinear Structure Based Elastohydrodynamic Analysis Method for Connecting Rod Big End Bearings of High Performance Engines Transactions of the ASME 126 664 671 2004
- Grente , C. , Ligier , J. L. , Toplosky , J. , Bonneau , D. The consequence of performance increases of automotive engines on the modelisation of main and connecting-rod beaings Tribology Series 39 839 850 2001
- Goenka , P. and Paranjpe , R. A Review of Engine Bearing Analysis Methods at General Motors SAE Technical Paper 920489 1992 10.4271/920489
- Ozdemir , A. R. , Kasapolu , E. , Hacolu , B. , Duyar , M. An Investigation on the Bearing Design and Friction Characteristics of a Hermetic Reciprocating Compressor International Compressor Engineering Conference 2278 2014
- Tanaka , M. Recent analyses and designs of thick film bearings New directions in tribology 411 433 1997
- Andres , L. S. , Kerth , J. Thermal effects on the performance of floating ring bearings for turbochargers Proceedings of the institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 218 437 450 2004
- Houpert , L. New results of traction force calculations in elastohydrodynamic contacts Transactions ASME Journal Tribology 107 241 248 1985
- Gohar , R. , Rahnejat , H. Fundamentals of Tribology Imperial College Press London 2008
- Cross , M. M. Rheology of Non-Newtonian Fluids: A New Flow Equation for Pseudoplastic Systems Journal of Colloid Science 20 417 437 1965
- Elrod , H. G. A cavitation algorithm Journal of Lubrication Technology 103 350 354 1981
- Rahnejat , H. Multi-body dynamics: Vehicles, machines and mechanisms Professional Engineering Publishing 1998
- Rahnejat , H. Multi-body dynamics: Historical evolution and application Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 214 149 173 2010
- Ebrat , O. , Mourelatos , Z. P. , Vlahopoulos , N. , Vaidyanathan , K. Calculation of Journal Bearing Dynamic Characteristics Including Journal Misalignment and Bearing Structural Deformation Tribology Transactions 47 94 102 2004
- Patir , N. , Cheng , H. S. An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication Journal of Lubrication Technology 100 12 17 1978
- Khonsari , M. M. , Wang , S. H. On The Fluid-Solid Interaction in Reference to Thermoelastohydrodynamic Analysis of Journal Bearings Journal of Tribology 113 2 398 404 1991
- Cheng , X. Einfluß einer Schmierfilmkavitation auf die dynamischen Eigenschaften von Quetschöldämpfern VDI servies 1 243 Duesseldorf 1994
- Sommerfeld , A. Zur hydrodynamischen Theorie der Schmiermittelreibung Zeitschrift für Mathematik und Physik 40 97 155 1904
- Guembel , L. , Everling , E. Reibung und Schmierung im Maschinenbau Krayn 1925
- Reynolds , O. On the Theory of Lubrication and its Application to Mr. Beauchamp Towers Experimental Determination of the Viscosity of Olive Oil Philosophical transactions of the Royal Society of London 177 157 234 1927
- Jakobsson , B. , Floberg , L. The Finite Journal Bearing considering Vaporization Transactions of Chalmers University of Technology 190 1 116 1957
- Olsson , K. O. Cavitation in Dynamically Loaded Bearings Transactions of Chalmers University of Technology 308 1965
- Sahlin , F. , Almqvist , A. , Larsson , R. , Glavatskih , S. A Cavitation Algorithm for Arbitrary Lubricant Compressibility Tribology International 40 1294 1300 2007
- Murty , K. G. Note on a Bard-Type Scheme for Solving the Complementarity Problem Journal of Operational Research Society of India 11 123 130 1974
- Bode , B. Modell zur Beschreibung des Fließverhaltens von Flüssigkeiten unter hohem Druck Tribologie und Schmierungstechnik 36 4 182 189 1989
- Roelands , C. J. A. Correlational aspects of the viscosity-temperature-pressure relationship of lubricating oil PhD thesis University of Delft 1966
- Bukovnik , S. , Offner , G. , Caika , V. , Priebsch , H. H. , Bartz , W. J. Thermo-Elasto-Hydrodynamic Lubrication Model for Journal Bearing Including Shear Rate Dependent Viscosity Journal of Lubrication Science 19 4 231 245 2007
- Offner , G. Friction Power Loss Simulation of Internal Combustion Engines Considering Mixed Lubricated Radial Slider, Axial Slider and Piston to Liner Contacts Tribology Transactions 56 503 515 2013
- Offner , G. Modelling of Condensed Flexible Bodies Considering Non-linear Inertia Effects resulting from Gross Motions Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics 225 3 204 219 2011
- Schwertassek , R. , Wallrapp , O. , Shabana , A. A. Flexible Multibody Simulation and Choice of Shape Functions Nonlinear Dynamics 20 361 380 1999
- Grün , F. , Godor , I. , Sailer , W. , Gänser , H.-P. Simulation of tribological functionality of heterogeneous tribomaterials Tribology International 46 119 127 2012
- Krampl , H. , Grün , F. , Godor , I. Novel Methodology for the Calculation of Local Loadings in Lubricated Heterogeneous Tribosystems 3rd European Conference on Tribology Vienna 2011
- Offner , G. , Herbst , H. , Mahmoud , K. , Baier , W. Analysis of the Lubricant Flow in a Main Bearing European Conference on Tribology ECOTRIB, Vienna 2011
- Barus C. Isothermals isopiestics and isometrics relative to viscosity American journal of science 1893 266 87 96
- Mittwollen , N. Das Betriebsverhalten von Radialgleitlagern bei hohen Umfangsgeschwindigkeiten und hohen thermischen Belastungen VDI series I No. 187, VDI, phd-thesis
- Goodwin , M. J. , Nikolajsen J. L. , and Ogrodnik P. J. Reciprocating machinery bearing analysis: theory and practice Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 217.6 2003 409 426
- Vogel , Hans. The law of the relation between the viscosity of liquids and the temperature Phys. Z 22 1921 645 646
- Teodorescu , M. , Balakrishnan S. , and Rahnejat H. Integrated tribological analysis within a multi-physics approach to system dynamics Tribology and interface engineering series 48 2005 725 737