This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Investigations of Power Distribution in Transmissions of Heavy Trucks
Technical Paper
2016-01-1100
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The main indicators for mobility of a multipurpose wheeled vehicle are the maximum and average technical velocity (it is defined as the distance traveled divided by the time elapsed), and they are mainly determined by power-to-weight ratio and the parameters of the suspension. As our analysis shows, with the increase of the power-toweight ratio of the vehicle and its weight, the growth rate of the velocity is reduced, and after reaching a certain value, the velocity remains almost constant. This is due to the fact that for operating conditions of the multi-purpose wheeled vehicle, movement on roads with different degrees of uneven distribution of the rolling resistance and adhesion, in both transverse and longitudinal directions, is typical.
In this investigation we evaluate the effectiveness of the main methods of power distribution between the drive wheels of the multipurpose wheeled vehicles: disabling of drive axles, blocking of cross-axle and inter-axle differentials, a slowdown of slipping wheels.
It was revealed that the transmission of a promising multipurpose wheeled vehicle has to be modernized in the following ways: 1) all-wheel drive with the rational value of the gear ratio of inter-axle differential; 2) realization of the possibility of periodic shutdown of the drive axles when road conditions are good, or turning on the additional driving axles of the trailer when the road conditions require significant drive forces and torques; 3) providing of limited excess capacity of power unit by reducing the fuel supply or applying braking torque to the slipping wheels; 4) providing of rigid kinematic connection in the movement process with compensation of the kinematic mismatch by adjusting of air pressure in the tires.
At present, the effectiveness of the proposed methods of power distribution has been investigated in different extent. Thus, there arises the problem of the complex evaluation of the effectiveness of methods of the power distribution between the drive wheels of the multi-purpose wheeled vehicle. This investigation is devoted to this problem.
Recommended Content
Technical Paper | Power Distribution in Transmissions of Multi-Wheeled Vehicles |
Technical Paper | Effect of Leaf Springs on Suspension and Steering System |
Journal Article | A New Chassis Dynamometer Laboratory for Vehicle Research |
Authors
Citation
Keller, A., Aliukov, S., Anchukov, V., and Ushnurcev, S., "Investigations of Power Distribution in Transmissions of Heavy Trucks," SAE Technical Paper 2016-01-1100, 2016, https://doi.org/10.4271/2016-01-1100.Also In
References
- Keller , A. , and Murog , I. Principles and methods of distribution of power among drive wheels of automobile chassis base Chelyabinsk 2009
- Pliev , I. Multi-purpose vehicles Moscow Moscow State Industrial University 2011
- Verzhbitzkij , A. , and Pliev , I. Analysis of parameters and designs of domestic and foreign vehicles Cars and motors Moscow NAMI 231 2003
- Kaminaga et al. Vehicle Body Slip Angle Estimation Using an Adaptive Observer Proceeding of JSAE Society of Automotive Engineers of Japan 1998
- Fukumura et al. The method of optimizing Traction Control System (TCS) and an application to vehicle dynamics control system Proceeding of JSAE (Society of Automotive Engineers of Japan) 1996
- Kageyama et al. A Study of Anti-Lock Braking Systems with Estimation AVEC '96 1996
- Gillespie , T. Fundamentals of Vehicle Dynamics Warrendale Society of Automotive Engineers, Inc. 1992 10.4271/R-114
- Hoeck , M. and Gasch , C. The Influence of Various 4WD Driveline Configurations on Handling and Traction on Low Friction Surfaces SAE Technical Paper 1999-01-0743 1999 10.4271/1999-01-0743
- Keller , A. and Aliukov , S. Methodology of System Analysis of Power Distribution among Drive Wheels of an All-wheel-drive Truck SAE Technical Paper 2015-01-2788 2015 10.4271/2015-01-2788
- Keller , A. and Aliukov , S. Rational Criteria for Power Distribution in All-wheel-drive Trucks SAE Technical Paper 2015-01-2786 2015 10.4271/2015-01-2786
- Keller , A. and Aliukov , S. Effectiveness of Methods of Power Distribution in Transmissions of All-Wheel-Drive Trucks SAE Technical Paper 2015-01-2732 2015 10.4271/2015-01-2732
- Keller , A. , Murog , I. , and Aliukov , S. Comparative Analysis of Methods of Power Distribution in Mechanical Transmissions and Evaluation of their Effectiveness SAE Technical Paper 2015-01-1097 2015 10.4271/2015-01-1097