Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Numerical Investigation of Two-Phase Flow Evolution of In- and Near-Nozzle Regions of a Gasoline Direct Injection Engine During Needle Transients

Journal Article
2016-01-0870
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2016-01-0870
Published April 05, 2016 by SAE International in United States
Numerical Investigation of Two-Phase Flow Evolution of In- and Near-Nozzle Regions of a Gasoline Direct Injection Engine During Needle Transients
Sector:
Citation: Saha, K., Som, S., Battistoni, M., Li, Y. et al., "Numerical Investigation of Two-Phase Flow Evolution of In- and Near-Nozzle Regions of a Gasoline Direct Injection Engine During Needle Transients," SAE Int. J. Engines 9(2):1230-1240, 2016, https://doi.org/10.4271/2016-01-0870.
Language: English

References

  1. Montanaro , A. and Allocca , L. Flash Boiling Evidences of a Multi-Hole GDI Spray under Engine Conditions by Mie-Scattering Measurements SAE Technical Paper 2015-01-1945 2015 10.4271/2015-01-1945
  2. Weber D. and Leick P. Structure and Velocity Field of Individual Plumes of Flashing Gasoline Direct Injection Sprays ILASS-Europe 2014, 26^th Annual Conference on Liquid Atomiation and Spray Systems Bremen, Germany 2014
  3. Vanderwege B. A. and Hochgreb S. The Effect of Fuel Volatility on Sprays from High-Pressure Swirl -njectors International Symposium on Combustion 1998
  4. Zeng W. , Xu M. , Zhang G. , Zhang Y. , and Cleary D. J. Atomization and Vaporization for Flash-Boiling Multi-hole Sprays with Alcohol Fuels Fuel 95 287 297 2012
  5. Xu , M. , Zhang , Y. , Zeng , W. , Zhang , G. et al. Flash Boiling: Easy and Better Way to Generate Ideal Sprays than the High Injection Pressure SAE Int. J. Fuels Lubr. 6 1 137 148 2013 10.4271/2013-01-1614
  6. Blinkov V. N. , Jones O. C. , and Nigmatulia B. I. Nucleation and Flashing in Nozzles - 2. Comparison with Experiments Using a Five-Equation Model for Vapor Void Development International Journal of Mulitphase Flow 19 6 965 986 1993
  7. Chang D. L. and Lee C. F. Preliminary Computational Studies of Flash Boiling for Fuel Injectors in Gasoline Direct Injection Automotive Engines Proceedings of Inter-society Energy Conversion Engineering Conference 2002
  8. Kawano , D. , Goto , Y. , Odaka , M. , and Senda , J. Modeling Atomization and Vaporization Processes of Flash-Boiling Spray SAE Technical Paper 2004-01-0534 2004 10.4271/2004-01-0534
  9. Zeng Y. and Lee C. F. An Atomization Model for Flash Boiling Sprays Combustion Science and Technology 169 45 67 2001
  10. Zuo B. , Gomes A. M. , and Rutland C. J. Modelling Superheated Fuel Sprays and Vaporization International Journal of Engine Research 1 321 336 2000
  11. Lu N. , Reveillon J. , Meslem Y. , and Demoulin F. Modelling Cavitation and Flash Atomization ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting Chicago 2014
  12. Henry R. and Fauske H. The Two-Phase Critical Flow of One Component Mixtures in Nozzles, Orifices and Short Tubes ASME Journal of Heat Transfer 93 179 187 1971
  13. Bilicki Z. and Kestin J. Physical Aspects of the Relaxation Model in Two-Phase Flows Proceedings of Royal Society London A 428 379 397 1990
  14. Downar-Zaploski P. , Bilicki Z. , Bolle L. , and Franco J. The Non-equilibrium Relaxation Model for One-Dimensional Flashing Liquid Flow International Journal of Multiphase Flow 22 3 473 483 June 1996
  15. Schmidt D. P. , Gopalakrishnan S. , and Jasak H. Multidimensional Simulation of Thermal Non-equilibrium Channel Flow International Journal of Multiphase Flow 36 284 292 2010
  16. Neroorkar K. D. Modeling of Flash Boiling Flows in Injectors with Gasoline-Ethanol Fuel Blends Ph. D. Thesis University of Massachusetts Amherst 2011
  17. Bianchi , G. , Negro , S. , Forte , C. , Cazzoli , G. et al. The Prediction of Flash Atomization in GDI Multi-Hole Injectors SAE Technical Paper 2009-01-1501 2009 10.4271/2009-01-1501
  18. Brennen C. E. Cavitation and Bubble Dynamics Oxford University Press 1995
  19. Gopalakrishnan , S. and Schmidt , D. A Computational Study of Flashing Flow in Fuel Injector Nozzles SAE Int. J. Engines 1 1 160 170 2009 10.4271/2008-01-0141
  20. Moulai , M. , Grover , R. , Parrish , S. , and Schmidt , D. Internal and Near-Nozzle Flow in a Multi-Hole Gasoline Injector Under Flashing and Non-Flashing Conditions SAE Technical Paper 2015-01-0944 2015 10.4271/2015-01-0944
  21. Saha K. , Som S. , Battistoni M. , Li Y. , Quan S. , and Senecal P. K. Modeling of Internal and Near-nozzle Flow for a GDI Fuel Injector Proceedings of the ASME 2015 ICED Fall Technical Conference ICEF2015-1112, Houston 2015
  22. Spray G ECN Sandia National Laboratory 2015
  23. Richards K. J. , Senecal P. K. , and Pomraning E. CONVERGE v2.2 Documentation Convergent Sciences, Inc. 2014
  24. Battistoni , M. , Xue , Q. , Som , S. , and Pomraning , E. Effect of Off-Axis Needle Motion on Internal Nozzle and Near Exit Flow in a Multi-Hole Diesel Injector SAE Int. J. Fuels Lubr. 7 1 167 182 2014 10.4271/2014-01-1426
  25. Xue Q. , Battistoni M. , Powell C. F. , Longman D. E. , Quan S. P. , Pomraning E. , Senecal P. K. , Schmidt D. P. , and Som S. An Eulerian CFD Model and X-ray Radiography for Coupled Nozzle Flow and Spray in Internal Combustion Engines International Journal of Multiphase Flow 70 77 88 2015
  26. Zhao H. , Quan S. , Dai M. , Pomraning E. , Senecal P. , Xue Q. , Battistoni M. , and Som S. Validation of a Three-Dimensional Internal Nozzle Flow Model Including Automatic Mesh Generation and Cavitation Effects ASME 2013 Internal Combustion Engine Division Fall Technical Conference Dearborn, Michigan 2013
  27. Battistoni M. , Som S. , and Longman D. E. Comparison of Mixture and Multi-fluid Models for In-Nozzle Cavitation Prediction ASME Journal of Engineering for Gas Turbuines and Power 136 6 (061506)1 12 2014
  28. Battistoni M. , Duke D. J. , Swantek A. B. , Tilocco F. Z. , Powell C. F. , and Som S. Effects of Non-condensable Gas on Cavitating Nozzles Atomization and Sprays 25 6 453 483 2015
  29. Dymond J. H. , Glen N. F. , and Isdale J. D. Transport Properties of Nonelectrolyte Liquid Mixtures vii. Viscosity Coefficients for Isooctane and for Equimolar Mixtures of Isooctane + N-Octane and Isooctane + N-Dodecane from 25 to 100 at Pressures up to 500 mpa or to the Freezing Pressure International Journal of Thermophysics 6 3 233 250 1985
  30. Som S. , Wang Z. , Pei Y. , Senecal P. K. , and Pomraning E. LES of Vaporizing Gasoline Sprays Considering Multi-injection Averaging And Grid-convergent Mesh Resolution Proceedings of the ASME 2015 Internal Combustion Engine Division Fall Technical Conference ICEF2015-1003, Houston, Texas 2015
  31. Manin , J. , Jung , Y. , Skeen , S. , Pickett , L. et al. Experimental Characterization of DI Gasoline Injection Processes SAE Technical Paper 2015-01-1894 2015 10.4271/2015-01-1894

Cited By

Recommended Content

Technical Paper Numerical Study of Internal Combustion Engine using OpenFOAM®
Technical Paper Primary Breakup Model for Turbulent Liquid Jet Based on Ligament Evolution
Technical Paper Characterization of Intake-Generated Flow Fields in I.C. Engines Using 3-D Particle Tracking Velocimetry (3-D PTV)