This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Identification of Aging Effects in Common Rail Diesel Injectors Using Geometric Classifiers and Neural Networks
Technical Paper
2016-01-0813
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Aging effects such as coking or cavitation in the nozzle of common rail (CR) diesel injectors deteriorate combustion performance. This is of particular relevance when it comes to complying with emission legislation and demonstrates the need for detecting and compensating aging effects during operation. The first objective of this paper is to analyze the influence of worn nozzles on the injection rate. Therefore, measurements of commercial solenoid common rail diesel injectors with different nozzles are carried out using an injection rate analyzer of the Bosch type. Furthermore, a fault model for typical aging effects in the nozzle of the injector is presented together with two methods to detect and identify these effects. Both methods are based on a multi-domain simulation model of the injector. The needle lift, the control piston lift and the pressure in the lower feed line are used for the fault diagnosis. The first method is based on signal characteristics in the time domain to generate normalized reference maps. For determining the aging parameters a geometric classification method is used. The second method is a multi-net implementation of an artificial neural network. The methods show good results regarding the detection and identification of the investigated aging effects and will therefore be the basis for the development of compensation methods in future investigations.
Recommended Content
Authors
Citation
Hofmann, O., Strauß, P., Schuckert, S., Huber, B. et al., "Identification of Aging Effects in Common Rail Diesel Injectors Using Geometric Classifiers and Neural Networks," SAE Technical Paper 2016-01-0813, 2016, https://doi.org/10.4271/2016-01-0813.Also In
References
- Galante-Fox , J. and Bennett , J. Diesel injector internal deposits in High Pressure Common Rail diesel engines Fuel Systems for IC Engines London 2012 10.1533/9780857096043.5.157
- Quigley , R. , Barbour , R. , Fahey , E. , and Arters , D. A Study of the Internal Diesel Injector Deposit Phenomenon th International Colloquium Fuels 2011
- d’Ambrosio , S. and Ferrari , A. Diesel Injector Coking: Optical-Chemical Analysis of Deposits and Influence on Injected Flow-Rate, Fuel Spray and Engine Performance Journal of Engineering for Gas Turbines and Power 134 6 062801 2012 10.1115/1.4005991
- Argueyrolles , B. , Dehoux , S. , Gastaldi , P. , Grosjean , L. et al. Influence of injector nozzle design and cavitation on coking phenomenon SAE Technical Paper 2007-01-1896 2007 10.4271/2007-01-1896
- Williams , R. , Smith , A. , and Buttery , I. Formation and Removal of Injector Nozzle Deposits in Modern Diesel Cars SAE Int. J. Fuels Lubr. 6 1 230 240 2013 10.4271/2013-01-1684
- Winterbone , D. , Clough , E. , Rao , K. , Richards , P. et al. The Effect of DI Nozzle Fouling on Fuel Spray Characteristics SAE Technical Paper 922232 1992 10.4271/922232
- Miyaki , M. , Takeuchi , K. , Ishizuka , K. and Sasaki , S. The Breakthrough of Common Rail System: Closed-loop Control Strategy Using Injector with Built-in Pressure Sensor 30th Internationales Wiener Motorensymposium Vienna 2009
- Marker , J. , Willmann , M. , Mlicki , F. and Mehr , A. Potential of INSITU closed-loop control of fuel injection in large LFO engines 15th The Working Process of the Internal Combustion Engine Graz 2015
- Shinohara , Y. , Takeuchi , K. , Herrmann , O. and Laumen , H. Common-Rail-Einspritzsystem mit 3000 bar MTZ - Motorentechnische Zeitschrift 72 1 10 15 2011 10.1365/s35146-011-0005-7
- Durst , F. , Han , Y. and Ratlamwala , H. Measurements of Instantaneous Volume Flow Rates During Fuel Injections MTZ - Motorentechnische Zeitschrift 76 6 32 37 2015 10.1007/s38313-015-0016-8
- Huber , B. and Ulbrich , H. Simulation and Validation of a Common Rail Diesel Injector Proceedings of the Ninth International Conference on Engineering Computational Technology 2014
- Huber , B. and Ulbrich , H. Experimental Evaluation of the Static Magnetic Force and Dynamic Investigation of the Solenoid Valve of a Common Rail Diesel Injector Proceedings of the FISITA 2014 World Automotive Congress. Royal Dutch Society of Engineers (KIVI) and FISITA (International Federation of Automotive Engineering Societies) 2014 10.4203/ccp.105.6
- Huber , B. and Ulbrich , H. Modeling and Experimental Validation of the Solenoid Valve of a Common Rail Diesel Injector SAE Technical Paper 2014-01-0195 2014 10.4271/2014-01-0195
- Dongiovanni , C. and Coppo , M. Accurate Modelling of an Injector for Common Rail Systems Fuel Injection 2010 10.5772/9728
- Isermann , R. Fault-Diagnosis Systems: An Introduction from Fault Detection to Fault Tolerance Springer-Verlag Berlin Heidelberg 978-3-540-24112-6 2006 10.1007/3-540-30368-5
- Murty , M. and Devi , V. Pattern Recognition: An Algorithmic Approach Springer-Verlag Berlin Heidelberg 978-0-85729-494-4 2011 10.1007/978-0-85729-495-1
- Hagan , M. , Demuth , H. and Beale , M. Neural Network Design 2 nd 2014 978-0971732117
- Siebertz , K. , van Bebber , D. and Hochkirchen , T. Statistische Versuchsplanung: Design of Experiments (DoE) Springer-Verlag Berlin Heidelber 978-3-642-05493-8 2010 10.1007/978-3-642-05493-8
- MacKay , D. Bayesian Interpolation Maximum Entropy and Bayesian Methods 39 66 1992 10.1007/978-94-017-2219-3_3
- Sharkey , A. , Chandroth , G. and Sharkey , N. A Multi-Net System for the Fault Diagnosis of a Diesel Engine Neural Computing & Applications 9 2 152 160 2000 10.1007/s005210070026