This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Reduction of Heat Loss and Improvement of Thermal Efficiency by Application of “Temperature Swing” Insulation to Direct-Injection Diesel Engines

Journal Article
2016-01-0661
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 05, 2016 by SAE International in United States
Reduction of Heat Loss and Improvement of Thermal Efficiency by Application of “Temperature Swing” Insulation to Direct-Injection Diesel Engines
Sector:
Citation: Wakisaka, Y., Inayoshi, M., Fukui, K., Kosaka, H. et al., "Reduction of Heat Loss and Improvement of Thermal Efficiency by Application of “Temperature Swing” Insulation to Direct-Injection Diesel Engines," SAE Int. J. Engines 9(3):1449-1459, 2016, https://doi.org/10.4271/2016-01-0661.
Language: English

References

  1. Bryzik, W. and Kamo, R., "TACOM/Cummins Adiabatic Engine Program," SAE Technical Paper 830314, 1983, doi:10.4271/830314.
  2. Osawa, K., Kamo, R., and Valdmanis, E., "Performance of Thin Thermal Barrier Coating on Small Aluminum Block Diesel Engine," SAE Technical Paper 910461, 1991, doi:10.4271/910461.
  3. Suziki, T., Tsujita, M., Mori, Y., and Suzuki, T., "An Observation of Combustion Phenomenon on Heat Insulated Turbo-Charged and Inter-Cooled D.I. Diesel Engines," SAE Technical Paper 861187, 1986, doi:10.4271/861187.
  4. Assanis, D. and Badillo, E., "Transient Heat Conduction in Low-Heat-Rejection Engine Combustion Chambers," SAE Technical Paper 870156, 1987, doi:10.4271/870156.
  5. Wong, V., Bauer, W., Kamo, R., Bryzik, W. et al., "Assessment of Thin Thermal Barrier Coatings for I.C. Engines," SAE Technical Paper 950980, 1995, doi:10.4271/950980.
  6. Saad, D., Saad, P., Kamo, L., Mekari, M. et al., "Thermal Barrier Coatings for High Output Turbocharged Diesel Engine," SAE Technical Paper 2007-01-1442, 2007, doi:10.4271/2007-01-1442.
  7. Kosaka, H., Wakisaka, Y., Nomura, Y., Hotta, Y. et al., "Concept of “Temperature Swing Heat Insulation” in Combustion Chamber Walls, and Appropriate Thermo-Physical Properties for Heat Insulation Coat," SAE Int. J. Engines 6(1):142-149, 2013, doi:10.4271/2013-01-0274.
  8. Fujimoto, H., Yamamoto, H., Fujimoto, M., and Yamashita, H., "A Study on Improvement of Indicated Thermal Efficiency of ICE Using High Compression Ratio and Reduction of Cooling Loss," SAE Technical Paper 2011-01-1872, 2011, doi:10.4271/2011-01-1872.
  9. Kikusato, A., Jin, K., and Daisho, Y., "A Numerical Simulation Study on Improving the Thermal Efficiency of a Spark Ignited Engine --- Part 1: Modeling of a Spark Ignited Engine Combustion to Predict Engine Performance Considering Flame Propagation, Knock, and Combustion Chamber Wall ---," SAE Int. J. Engines 7(1):96-105, 2014, doi:10.4271/2014-01-1073.
  10. Nishikawa N., Takagishi R., Shimizu F. and Horie T., “Heat Insulation by “Temperature Swing” in Combustion Chamber Walls (Third Report), Proceedings of JSAE (in Japanese), (2015)
  11. Fukui, K., Hattori, Y., Kosaka, H., Kawaguchi, A. et al., "Development of instantaneous temperature measurement technique for combustion chamber surface and verification of temperature swing concept," SAE Technical Paper 2016-01-0675, 2016, doi:10.4271/2016-01-0675.
  12. Yamamoto S., Nagaoka M., Ueda R., Wakisaka Y. and Noda S., ”Numerical simulation of diesel combustion with a high exhaust gas recirculation rate”, International Journal of Engine Research, Vol. 11, No.1, p17-27, (2010)
  13. KuboyamaT., Kosaka H., Aizawa, T and matsui Y., “A Study on Heat Loss in DI Diesel Engines, Proceedings of COMODIA 2004, (2004)
  14. Kawaguchi A., Tateno M., Yamasita H., Tomoda T., NishikawaN., Yamashita C., Wakisaka Y. and Nakakita K., ”Toyota’s Innovative Thermal Management Approaches -Thermo Swing Wall Insulation Technology-, Proceedings of 24th Aachen Colloquium Automobile and Engine Technology, (2015)

Cited By