Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Integrated In-Cylinder / CHT Methodology for the Simulation of the Engine Thermal Field: An Application to High Performance Turbocharged DISI Engines

Journal Article
2016-01-0578
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2016-01-0578
Published April 05, 2016 by SAE International in United States
Integrated In-Cylinder / CHT Methodology for the Simulation of the Engine Thermal Field: An Application to High Performance Turbocharged DISI Engines
Sector:
Citation: Cicalese, G., Berni, F., and Fontanesi, S., "Integrated In-Cylinder / CHT Methodology for the Simulation of the Engine Thermal Field: An Application to High Performance Turbocharged DISI Engines," SAE Int. J. Engines 9(1):601-617, 2016, https://doi.org/10.4271/2016-01-0578.
Language: English

References

  1. Turner , J.W.G. , Pearson , R.J. , and Kenchington , S.A. Concepts for improved fuel economy from gasoline engines International Journal of Engine Research January 1 2005 6 2 137 157 4
  2. Fraser , N. , Blaxill , H. , Lumsden , G. , and Bassett , M. Challenges for Increased Efficiency through Gasoline Engine Downsizing SAE Int. J. Engines 2 1 991 1008 2009 10.4271/2009-01-1053
  3. Fontanesi , S. , d’Adamo , A. , Rutland , C.J. Large-Eddy simulation analysis of spark configuration effect on cycle-tocycle variability of combustion and knock International Journal of Engine Research April 2015 16 3 403 418 January 9 2015
  4. Fontanesi , S. , and Giacopini , M. Multiphase CFD-CHT optimization of the cooling jacket and FEM analysis of the engine head of a V6 diesel engine Applied Thermal Engineering 52 2 15 April 2013 293 303 1359-4311 10.1016/j.applthermaleng.2012.12.005
  5. Alkidas , A.C. Heat Transfer Characteristics of a Spark-Ignition Engine ASME. J. Heat Transfer 1980 102 2 189 193 10.1115/1.3244258
  6. Alkidas , A.C. , Myers , J.P. Transient Heat-Flux Measurements in the Combustion Chamber of a Spark-Ignition Engine ASME. J. Heat Transfer 1982 104 1 62 67 10.1115/1.3245069
  7. Fontanesi , S. , Cicalese , G. , Cantore , G. , and D'Adamo , A. Integrated In-Cylinder/CHT Analysis for the Prediction of Abnormal Combustion Occurrence in Gasoline Engines SAE Technical Paper 2014-01-1151 2014 10.4271/2014-01-1151
  8. Fontanesi , S. , Giacopini , M. , Cicalese , G. , Sissa , S. , Fantoni , S. Numerical investigation of the cavitation damage in the wet cylinder liner of a high performance motorbike engine Engineering Failure Analysis 44 September 2014 408 423 1350-6307 http://dx.doi.org/10.1016/j.engfailanal.2014.05.025
  9. Fontanesi , S. , Cicalese , G. , d’Adamo , A. , Cantore , G. A Methodology to Improve Knock Tendency Prediction in High Performance Engines ENERGY PROCEDIA 45 769 778 1876-6102
  10. Fontanesi , S. , Cicalese , G. , and Giacopini , M. Multiphase CFD-CHT Analysis and Optimization of the Cooling Jacket in a V6 Diesel Engine SAE Technical Paper 2010-01-2096 2010 10.4271/2010-01-2096
  11. Han , Z. ; Reitz , R.D. A Temperature Wall Function Formulation for Variable Density Turbulent Flows with Application to Engine Convective Heat Transfer Modeling International Journal of Heat and Mass Transfer 40 3 613 625 1997
  12. Angelberger , C. , Poinsot , T. , and Delhay , B. Improving Near-Wall Combustion and Wall Heat Transfer Modeling in SI Engine Computations SAE Technical Paper 972881 1997 10.4271/972881
  13. Rakopoulos , C. D. , Kosmadakis , G. M. , Pariotis , E. G. Critical evaluation of current heat transfer models used in CFD incylinder engine simulations and establishment of a comprehensive wall-function formulation Applied Energy 87 2010 1612 1630
  14. Kays , W.M. , Crawford , M. E. Convective heat and mass transfer McGraw-Hill New York 3 rd 1994
  15. Fontanesi , S. , Cicalese , G. , and Tiberi , A. Combined Incylinder / CHT Analyses for the Accurate Estimation of the Thermal Flow Field of a High Performance Engine for Sport Car Applications SAE Technical Paper 2013-01-1088 2013 10.4271/2013-01-1088
  16. Giovannoni , N. , d'Adamo , A. , Cicalese , G. , and Cantore , G. Effects of Fuel-Induced Piston-Cooling and Fuel Formulation on the Formation of Fuel Deposits and Mixture Stratification in a GDI Engine SAE Technical Paper 2015-01-0394 2015 10.4271/2015-01-0394
  17. Esfahanian , V. , Javaheri , A. , Ghaffarpour , M. Thermal analysis of an SI engine piston using different combustion boundary condition treatments Applied Thermal Engineering 26 2-3 February 2006 277 287 1359-4311 http://dx.doi.org/10.1016/j.applthermaleng.2005.05.002
  18. Stevens , J.J. , Webb , B.W. Local Heat Transfer Coefficients Under an Axisymmetric, Single-Phase Liquid Jet ASME. J. Heat Transfer 1991 113 1 71 78 10.1115/1.2910554
  19. Malaguti , S. , Fontanesi , S. , Cantore , G. , Montanaro , A. , Allocca , L. Modelling of Primary Breakup Process of a Gasoline Direct Engine Multi-Hole Spray Atomization and Sprays 23 10 861 888 2013 1045-5110 1936-2684 10.1615/AtomizSpr.2013005867
  20. Reitz , R. and Diwakar , R. Effect of Drop Breakup on Fuel Sprays SAE Technical Paper 860469 1986 10.4271/860469
  21. Bai , C. and Gosman , A. Mathematical Modelling of Wall Films Formed by Impinging Sprays SAE Technical Paper 960626 1996 10.4271/960626
  22. Colin , O. , Benkenida , A. The 3-Zones Extended Coherent Flame Model (ECFM3Z) for Computing Premixed/Diffusion Combustion Oil & Gas Science and Technology - Rev. IFP 59 2004 6 593 609
  23. Bruneaux , G. , Poinsot , T. , Ferziger , J.H. Premixed flame-wall interaction in a turbulent channel flow: budget for the flame surface density evolution equation and modelling Journal of Fluid Mechanics 349 191 219 10.1017/S0022112097006769
  24. Angelberger , C. Contributions à la modélisation de l’interaction 17lame-paroi et des flux pariétaux dans les moteurs à allumage commandé PhD Thesis 1997
  25. Saric , S. and Basara , B. A Hybrid Wall Heat Transfer Model for IC Engine Simulations SAE Int. J. Engines 8 2 411 418 2015 10.4271/2015-01-0388

Cited By

Recommended Content

Technical Paper Combined In-cylinder / CHT Analyses for the Accurate Estimation of the Thermal Flow Field of a High Performance Engine for Sport Car Applications
Technical Paper Measurements and Multidimensional Modeling of Gas-Wall Heat Transfer in a S.I. Engine
Technical Paper Isobaric Combustion at a Low Compression Ratio