This content is not included in your SAE MOBILUS subscription, or you are not logged in.

On the Effect of Friction Law in Closed-Loop Coupling Disc Brake Model

Journal Article
2016-01-0476
ISSN: 1946-3995, e-ISSN: 1946-4002
Published April 05, 2016 by SAE International in United States
On the Effect of Friction Law in Closed-Loop Coupling Disc Brake Model
Sector:
Citation: Du, Y., Lv, Y., Wang, Y., and Gao, P., "On the Effect of Friction Law in Closed-Loop Coupling Disc Brake Model," SAE Int. J. Passeng. Cars - Mech. Syst. 9(1):154-159, 2016, https://doi.org/10.4271/2016-01-0476.
Language: English

References

  1. Chen, F., Quaglia, R., and Tan, C., "On Automotive Disc Brake Squeal Part I: Mechanisms and Causes," SAE Technical Paper 2003-01-0683, 2003, doi:10.4271/2003-01-0683.
  2. Kinkaid, N., O'Reilly, O., Papadopoulos, P., "Automotive disc brake squeal," Journal of Sound and Vibration, 267(1), 105-166, 2003, doi:10.1016/S0022-460X(02)01573-0.
  3. Ouyang, H., Nack, W., Yuan, Y., and Chen, F., "On Automotive Disc Brake Squeal Part II: Simulation and Analysis," SAE Technical Paper 2003-01-0684, 2003, doi:10.4271/2003-01-0684.
  4. Jiang, D., "A Study on Disc Brake Squeal," PH.D. thesis Automotive Engineering Department, Tsinghua University, Beijing, 1998.
  5. Dihua, G. and Dongying, J., "A Study on Disc Brake Squeal Using Finite Element Methods," SAE Technical Paper 980597, 1998, doi:10.4271/980597.
  6. Guan, D., Du, Y., Li Q., "Analysis of A Disc Brake High Frequency Squeal and Reduction". Engineering Mechanics, 2014, 31(12): 217-222.
  7. Xinchao, Z. and Dihua, G., "The Experimental and Simulational Analysis on Drum Brake Squeal by Structurally Closed-Loop Coupling Model," SAE Technical Paper 931879, 1993, doi:10.4271/931879.
  8. Zhu, X., Guan D., "Simulations of structurally close-loop coupling and experimental study on drum brake squeal of commercial vehicles". SAE Paper945049, 1994.
  9. Chen, X., "A study of drum brake judder," PH.D. thesis Automotive Engineering Department, Tsinghua University, Beijing, 1998.
  10. Xiaoyue, C., Dihua, G., and Xiaodong, W., "A Study on Drum Brake Judder," SAE Technical Paper 891329, 1989.
  11. Guan, D., Zhu, X., Cheng, B., "A Study on the Structural Vibration Noise of Drum Brake," Automotive Engineering, 15 (2): 71-78, 1993
  12. Sun, Z., Zeng, Q., Jiang, D., Guan, D., "A Study on Disc Brake Squeal," Automotive Engineering, 21(6): 326-332, 1997.
  13. Su, X., "Study on Brake Vibration and Noise Reduction Methods Using Substructure Sensitivity Analysis and Structural Modification Techniques," PH.D. thesis Automotive Engineering Department, Tsinghua University, Beijing, 2003.
  14. Guan, D., Su, X., Zhang, F., "Sensitivity analysis of brake squeal tendency to substructures' modal parameters," Journal of sound and vibration, 291(1): 72-80, 2006, doi:10.1016/j.jsv.2005.05.023.
  15. Guan, D., and Huang, J., "The method of feed-in energy on disc brake squeal," Journal of Sound and Vibration, 261 (2): 297-307, 2003, doi:10.1016/S0022-460X(02)01074-X.
  16. Du, Y., Lv, Y., Wang, Y., "Study on a New Closed-Loop Brake Squeal Model". (to be published in Chinese Journal of Mechanical Engineering).
  17. Guan, D., Su, X., "An Overview on Brake Vibrations and Noise," Engineering Mechanics, 21(4): 150-155, 2004.
  18. AbuBakar, A., Sharif, A., Rashid, M., and Ouyang, H., "Brake Squeal: Complex Eigenvalue versus Dynamic Transient Analysis," SAE Technical Paper 2007-01-3964, 2007, doi:10.4271/2007-01-3964.
  19. Kung, S., Stelzer, G., Belsky, V., and Bajer, A., "Brake Squeal Analysis Incorporating Contact Conditions and Other Nonlinear Effects," SAE Technical Paper 2003-01-3343, 2003, doi:10.4271/2003-01-3343.
  20. Bajer, A., Belsky, V., and Kung, S., "The Influence of Friction-Induced Damping and Nonlinear Effects on Brake Squeal Analysis," SAE Technical Paper 2004-01-2794, 2004, doi:10.4271/2004-01-2794.
  21. Zhang, L., Miao, W., Yu, Z., "Experimental Investigation to Friction-Vibration Coupling Characteristics of Vehicle Disc Brake," Tribology, 28(5): 480-484, 2008.
  22. Li, L., "Mechanism and Control of Disc Brake Noise," PH.D. thesis Chongqing Jiaotong University,2013.
  23. Willams, J., Zhang, Z., Oberst, S., et al, "Model Updating of Brake Components’ Influence on Instability Prediction," The 22nd International congress on sound and vibration.
  24. Bakar, A., Ouyang, H., and Siegel, J., "Brake Pad Surface Topography Part I: Contact Pressure Distribution," SAE Technical Paper 2005-01-3941, 2005, doi:10.4271/2005-01-3941.
  25. Du, Y., Gao, P., Wang, Y., and Lv, Y., "On the Coupling Stiffness in Closed-Loop Coupling Disc Brake Model through Optimization," SAE Int. J. Passeng. Cars - Mech. Syst. 8(1):31-36, 2015, doi:10.4271/2015-01-0668.

Cited By