This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Residual Stress Distributions in Rectangular Bars Due to High Rolling Loads
Journal Article
2016-01-0424
ISSN: 1946-3979, e-ISSN: 1946-3987
Sector:
Topic:
Citation:
Ali, M., Michlik, P., and Pan, J., "Residual Stress Distributions in Rectangular Bars Due to High Rolling Loads," SAE Int. J. Mater. Manf. 9(3):661-678, 2016, https://doi.org/10.4271/2016-01-0424.
Language:
English
References
- Altenberger , I. Deep Rolling - the Past, the Present and the Future Proceedings of 9th International Conference on Shot Peening ICSP9: 144-155 Paris, France 2005
- Wu , T. , Hartley , C.S. , Wang , X.M. and Tsai , C.T. Residual Stress Distribution in Cold Rolled Brass Sheet J. Mater. Process. Technol. 45 111 116 1994
- Sartkulvanich , P. , Altan , T. , Jasso , F. and Rodriguez , C. Finite Element Modeling of Hard Roller Burnishing: An Analysis on the Effects of Process Parameters Upon Surface Finish and Residual Stresses Journal of Manufacturing Science and Engineering 129 705 716 August 2007
- Klocke , F. , Bäcker , V. , Wegner , H. and Timmer , A. Innovative FE-Analysis of the Roller Burnishing Process for Different Geometries X International Conference on Computational Plasticity, COMPLAS X Oñate E. and Owen D. R. J. Ó CIMNE Barcelona, Spain 2009
- Klocke , F. , Bäcker , V. , Wegner , H. , Feldhaus , B. , Baron , H.-U. and Hessert , R. Influence of Process and Geometry Parameters on the Surface Layer State after Roller Burnishing of IN718 Prod. Eng. Res. Devel., German Academic Society for Production Engineering (WGP) 2009 10.1007/s11740-009-0182-0
- Klocke , F. , Bäcker , V. , Wegner , H. and Zimmermann , M. Finite Element Analysis of the Roller Burnishing Process for Fatigue Resistance Increase of Engine Components Proc. IMechE, 225 Part B: J. Engineering Manufacture 2010
- Prabhu , P. R. , Kulkarni , S. M. and Sharma , S. S. Influence of Deep Cold Rolling and Low Plasticity Burnishing on Surface Hardness and Surface Roughness of AISI 4140 Steel World Academy of Science, Engineering and Technology 72 619 624 2010
- Ali , M. Y. and Pan , J. Residual Stresses due to Rigid Cylinder Indentation and Rolling at a Very High Rolling Load ASME J. Manuf. Science and Engineering 137 051005 1 2015 10.1115/1.4031067
- Merwin , J. E. and Johnson , K. L. An Analysis of Plastic Deformation in Rolling Contact Proc. Instn. Mech. Engrs. 177 25 676 690 1963
- Bhargava , V. , Hahn , G. T. , and Rubin , C. A. An Elastic-Plastic Finite Element Model of Rolling Contact Part 1: Analysis of Single Contacts J. of Appl. Mech. 52 67 74 1985 10.1115/1.3169028
- Bhargava , V. , Hahn , G. T. , and Rubin , C. A. An Elastic-Plastic Finite Element Model of Rolling Contact Part 2: Analysis of Repeated Contacts J. of Appl. Mech. 52 75 82 1985 10.1115/1.3169030
- Kulkarni , S. M. , Hahn , G. T. , Rubin , C. A. , and Bhargava , V. Elastoplastic Finite Element Analysis of Three-Dimensional, Pure Rolling Contact at the Shakedown Limit J. Appl. Mech. 57 57 65 1990 10.1115/1.2888324
- Kulkarni , S. M. , Hahn , G. T. , Rubin , C. A. , and Bhargava , V. Elasto-Plastic Finite Element Analysis of Three-Dimensional Pure Rolling Contact Above the Shakedown Limit J. of Appl. Mech. 58 347 353 1991 10.1115/1.2897192
- Jiang , Y. and Sehitoglu , H. Rolling Contact Stress Analysis with the Application of a New Plasticity Model Wear 191 35 44 1996 10.1016/0043-1648(95)06663-2
- Jiang , Y. , Xu , B. , and Sehitoglu , H. Three-Dimensional Elastic-Plastic Stress Analysis of Rolling Contact J. Tribol. 124 699 708 2002 10.1115/1.1491978
- Yu , M. , Moran , B. , and Keer , L. M. A Direct Analysis of Two-Dimensional Elastic-Plastic Rolling Contact J. Tribol. 115 227 236 1993 10.1115/1.2920996
- Yu , M. M. H. , Moran , B. , and Keer , L. M. A Direct Analysis of Three-Dimensional Elastic-Plastic Rolling Contact J. Tribol. 117 234 243 1995 10.1115/1.2831236
- Chaise , T. and Nélias , D. Contact Pressure and Residual Strain in 3D Elasto-Plastic Rolling Contact for a Circular or Elliptical Point Contact J. Tribol. 133 1 9 2011
- Bijak-Zochowski , M. and Marek , P. Residual Stress in Some Elasto-Plastic Problems of Rolling Contact with Friction Int. J. Mech. Sci. 39 1 15 32 1997 10.1016/0020-7403(96)00018-5
- ABAQUS Version 6.10 User Manual SIMULIA Providence, RI 2010
- Michlik , P. Internal Report Caterpillar Inc. Peoria, IL 2009
- Ali , M. and Pan , J. Effect of a Deformable Roller on Residual Stress Distribution for Elastic-Plastic Flat Plate Rolling under Plane Strain Conditions SAE Int. J. Mater. Manf. 5 1 129 142 2012 10.4271/2012-01-0190
- Ali , M. and Pan , J. Elastic-Plastic Indentation and Flat Plate Rolling under Plane Strain Conditions SAE Int. J. Mater. Manuf. 4 1 125 137 2011 10.4271/2011-01-0035
- Choi , K.S. and Pan , J. Effects of Pressure-sensitive Yielding on Stress Distributions in Crankshaft Sections under Fillet Rolling and Bending Fatigue Tests Int. J. of Fatigue 31 10 1588 1597 2009 10.1016/j.ijfatigue.2009.04.007
- Sung , S. , Pan , J. , Ali , M. , Sorab , J. et al. Effects of Non-Associated Flow on Residual Stress Distributions in Crankshaft Sections Modeled as Pressure-Sensitive Materials under Fillet Rolling SAE Int. J. Mater. Manf. 8 2 487 493 2015 10.4271/2015-01-0602