Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Mechanical Behavior of Lithium-Ion Battery Component Materials and Error Sources Analysis for Test Results

Journal Article
2016-01-0400
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2016-01-0400
Published April 05, 2016 by SAE International in United States
Mechanical Behavior of Lithium-Ion Battery Component Materials and Error Sources Analysis for Test Results
Sector:
Citation: Jiang, X., Luo, H., Xia, Y., and Zhou, Q., "Mechanical Behavior of Lithium-Ion Battery Component Materials and Error Sources Analysis for Test Results," SAE Int. J. Mater. Manf. 9(3):614-621, 2016, https://doi.org/10.4271/2016-01-0400.
Language: English

References

  1. Feng , X. , Sun , J. , Ouyang , M. , Wang , F. et al. Characterization of penetration induced thermal runaway propagation process within a large format lithium ion battery module Journal of Power Sources 275 261 273 2015 10.1016/j.jpowsour.2014.11.017
  2. Lamb , J. , Orendorff , C. J. , Steele , L. A. M. , and Spangler , S. W. Failure propagation in multi-cell lithium ion batteries Journal of Power Sources 283 517 523 2015 10.1016/j.jpowsour.2014.10.081
  3. Xia , Y. , Wierzbicki , T. , Sahraei , E. , and Zhang , X. Damage of cells and battery packs due to ground impact Journal of Power Sources 267 78 97 2014 10.1016/j.jpowsour.2014.05.078
  4. Sinz , W. , Breitfuß , C. , Tomasch , E. , Gugler , J. et al. Integration of a crashworthy battery in a fully electric city bus International Journal of Crashworthiness 17 1 105 118 2012 10.1080/13588265.2011.633420
  5. Sahraei , E. , Campbell , J. , and Wierzbicki , T. Modeling and short circuit detection of 18650 Li-ion cells under mechanical abuse conditions Journal of Power Sources 220 360 372 2012 10.1016/j.jpowsour.2012.07.057
  6. Sahraei , E. , Hill , R. , and Wierzbicki , T. Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity Journal of Power Sources 201 307 321 2012 10.1016/j.jpowsour.2011.10.094
  7. Sahraei , E. , Meier , J. , and Wierzbicki , T. Characterizing and modeling mechanical properties and onset of short circuit for three types of lithium-ion pouch cells Journal of Power Sources 247 503 516 2014 10.1016/j.jpowsour.2013.08.056
  8. Luo , H. , Jiang , X. , Xia , Y. , and Zhou , Q. Fracture mode analysis of lithium-ion battery under mechanical loading Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition (IMECE 2015) 2015
  9. Cai , W. , Wang , H. , Maleki , H. , Howard , J. et al. Experimental simulation of internal short circuit in Li-ion and Li-ion-polymer cells Journal of Power Sources 196 18 7779 7783 2015 10.1016/j.jpowsour.2011.04.024
  10. Wierzbicki , T. , and Sahraei , E. Homogenized mechanical properties for the jellyroll of cylindrical Lithium-ion cells Journal of Power Sources 241 467 476 2012 10.1016/j.jpowsour.2013.04.135
  11. Lai , W.-J. , Ali , M. Y. , and Pan , J. Mechanical behavior of representative volume elements of lithium-ion battery cells under compressive loading conditions Journal of Power Sources 245 609 623 2014 10.1016/j.jpowsour.2013.06.134
  12. Lai , W.-J. , Ali , M. Y. , and Pan , J. Mechanical behavior of representative volume elements of lithium-ion battery modules under various loading conditions Journal of Power Sources 248 789 808 2014 10.1016/j.jpowsour.2013.09.128
  13. Sung , S. , Lai , W. , Ali , M. , Pan , J. et al. Compressive Behavior of Representative Volume Element Specimens of Lithium-Ion Battery Cells under Different Constrained Conditions SAE Int. J. Mater. Manf. 7 2 480 487 2014 10.4271/2014-01-1987
  14. Ali , M. Y. , Lai , W.-J. , and Pan , J. Computational models for simulations of lithium-ion battery cells under constrained compression tests Journal of Power Sources 242 325 340 2013 10.1016/j.jpowsour.2013.05.022
  15. Avdeev , I. V. , Martinsen , M. J. , and Francis , A. B. Materials testing of a lithium ion battery separator for use in finite element analysis Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition (IMECE 2012) 2012
  16. Sheidaei , A. , Xiao , X. , Huang , X. , and Hitt , J. Mechanical behavior of a battery separator in electrolyte solutions Journal of Power Sources 196 20 8728 8734 2011 10.1016/j.jpowsour.2011.06.026
  17. Huh , H. , Jeong , S. , Bahng , G. W. , Chae , K. S. , and Kim , C. G. Standard Uncertainty Evaluation for Dynamic Tensile Properties of Auto-Body Steel-Sheets Experimental Mechanics 54 6 943 956 2014 10.1007/s11340-014-9847-5
  18. Zhu , J. , Xia , Y. , and Gu , G. Extension of non-associated Hill48 model for characterizing dynamic mechanical behavior of a typical High Strength Steel sheet Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition (IMECE 2014) 2014
  19. Xia , Y. , Zhu , J. , and Zhou , Q. 2015 Verification of a multiple-machine program for material testing from quasi-static to high strain-rate International Journal of Impact Engineering 86 284 294 2015 10.1016/j.ijimpeng.2015.07.010
  20. Xia , Y. , Zhu , J. , Wang , K. , and Zhou , Q. Design and verification of a strain gauge based load sensor for medium-speed dynamic tests with a hydraulic test machine International Journal of Impact Engineering

Cited By