This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Studies on Aero-Acoustics Noise Prediction of MAC Unit Using Computational Modelling
ISSN: 0148-7191, e-ISSN: 2688-3627
Published April 05, 2016 by SAE International in United States
Annotation ability available
In an automotive air conditioning, aero-acoustic noise originating from HVAC (Heating Ventilation and Air Conditioning) unit is one of the major concerns for the customer satisfaction. “Fan blower excessive noise” is one among the top issues for all automotive manufacturers. In this paper, a 3D computational analysis is carried out for a passenger car HVAC unit to predict the noise originated from the HVAC unit. HVAC modeling is done using uni graphics and ANSA and the analysis is carried out using the commercial CFD software STAR CCM+. The inputs for the analysis are the airflow at HVAC Inlet, blower speed and the pressure drop characteristics of evaporator, filter and heater core. The computational model is done by considering the blower region as MRF (Moving Reference Frame) and the air flow is considered incompressible. DES (Detached Eddy Simulation) model is used to resolve the eddies generated by the turbulent flow. The pressure is sampled at measurement point which is processed to give the sound pressure level. The result predicted is the sound pressure level in dBA measured at 50 cm away from HVAC outlet in vent mode. Test is carried out to compare the simulation results. Test is carried out by placing the HVAC unit in the anechoic chamber with the inlet air flow of 450 m3/hr, blower rpm of 4100 and the sound pressure levels are measured using a microphone placed in central position in front of HVAC outlet air opening, 50 cm away from the opening and at an height from ground corresponding to the center of the opening. Simulation results correlate well with the test results and the error is within 10%. This methodology can be used to check the HVAC noise during early design stages resulting in optimized design and better customer satisfaction. Successful validation of the model has led to the application of this methodology in the pre-production stage of new programs during the design phase and it helps to reduce the physical testing.
|Journal Article||Numerical Simulation and Validation of Cabin Aiming and Cool-Down of a Passenger Car|
|Technical Paper||Modelling and Testing of Air Flow in a HVAC Module|
|Technical Paper||Evaluation of Cabin Comfort in Air Conditioned Buses Using CFD|
CitationVasanth, B., Sathish, K., and Sah, M., "Studies on Aero-Acoustics Noise Prediction of MAC Unit Using Computational Modelling," SAE Technical Paper 2016-01-0218, 2016, https://doi.org/10.4271/2016-01-0218.
- Uni graphics software NX 9.0 user manual
- Lee , D. , Perot , F. , Ih , K. , and Freed , D. Prediction of Flow-Induced Noise of Automotive HVAC Systems SAE Technical Paper 2011-01-0493 2011 10.4271/2011-01-0493
- STAR CCM 7.06 Help documents
- AbdulNour , B. CFD Prediction of Automotive Windshield Defrost Pattern SAE Technical Paper 1999-01-1203 1999 10.4271/1999-01-1203
- Prediction of noise in HVAC ducts, Sandhu, Dr Kamaljit Climate Control Systems, Jaguar Land Rover Open Source CFD International Conference 2008
- Pérot , F. , Kim , M.S. , Moreau , S. , Henner , M. , and Neal , D. Direct Aeroacoustics Prediction of a Low Speed Axial Fan 16th AIAA/CEAS Aeroacoustics Conference, AIAA-2010-3887 Stockholm, Sweden June 2010
- Lee , D. , Lee , M. , Ih , K. , Kim , M. et al. Aeroacoustics Predictions of Automotive HVAC Systems SAE Technical Paper 2010-01-0415 2010 10.4271/2010-01-0415
- Humbad , N. , Schlinke , G. , Scherer , S. Correlating HVAC Vehicle Interior Noise to Subsystem Measurements SAE Technical Paper 2009-01-2117 2009 10.4271/2009-01-2117