This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Performance Optimization of Single Cylinder Diesel Engine Oil Pump through PRV and Rotor System
Technical Paper
2015-26-0028
ISSN: 0148-7191, e-ISSN: 2688-3627
Sector:
Language:
English
Abstract
Oil pump is one of the important engine parasitic loads which takes up engine power through crankshaft to deliver oil flow rate according to engine demand to maintain required oil pressure. The proper functioning of oil pump along with optimum design parameters over various operating conditions is considered for required engine oil pressure. Pressure relief passage is also critical from design point of view as it maintains the required oil pressure in the engine. Optimal levels of oil pressure and flow are very important for satisfied performance and lubrication of various engine parts. Low oil pressure will lead to seizure of engine and high oil pressure leads to failure of oil filters, gasket sealing, etc. Optimization of pressure relief passage area along with other internal systems will also reduce the power consumed by the pump. Hence, the various oil pump critical design metrics are reviewed for single cylinder diesel engine to have optimal performance along with reduced power consumption without reduction in the oil pressure at the main oil gallery. This design was validated in the engine against the current and optimized design.
Recommended Content
Authors
Citation
Loganathan, S., Esakkimuthu, P., Srivatsan, M., and Anand, M., "Performance Optimization of Single Cylinder Diesel Engine Oil Pump through PRV and Rotor System," SAE Technical Paper 2015-26-0028, 2015, https://doi.org/10.4271/2015-26-0028.Also In
References
- Mancò , S. , Nervegna , N. , Rundo , M. , Armenio , G. et al. Gerotor Lubricating Oil Pump for IC Engines SAE Technical Paper 982689 1998 10.4271/982689
- Fabiani , M. , Mancò , S. , Nervegna , N. , Rundo , M. et al. Modelling and Simulation of Gerotor Gearing in Lubricating Oil Pumps SAE Technical Paper 1999-01-0626 1999 10.4271/1999-01-0626
- Mancò , S. , Nervegna , N. , and Rundo , M. Effects of Timing and Odd/Even Number of Teeth on Noise Generation of Gerotor Lubricating Pumps for IC Engines SAE Technical Paper 2000-01-2630 2000 10.4271/2000-01-2630
- Loganathan , S. , Sivanantham , R. , and kumar , J. Investigations on Reduction of Power Consumption of Oil Pump for New Advanced Multijet Diesel Engine SAE Technical Paper 2009-01-1463 2009 10.4271/2009-01-1463
- Sivanantham , R. and Sureshkumar , J. Performance Improvement of Oil Pump of a Passenger Car Diesel Engine to Enable Use of Low Viscous Oil and Operate at High Thermal Levels SAE Technical Paper 2010-01-1102 2010 10.4271/2010-01-1102