This content is not included in your SAE MOBILUS subscription, or you are not logged in.

An Investigation of Radiation Heat Transfer in a Light-Duty Diesel Engine

Journal Article
2015-24-2443
ISSN: 1946-3936, e-ISSN: 1946-3944
Published September 06, 2015 by SAE International in United States
An Investigation of Radiation Heat Transfer in a Light-Duty Diesel Engine
Sector:
Citation: Benajes, J., Martin, J., Garcia, A., Villalta, D. et al., "An Investigation of Radiation Heat Transfer in a Light-Duty Diesel Engine," SAE Int. J. Engines 8(5):2199-2212, 2015, https://doi.org/10.4271/2015-24-2443.
Language: English

References

  1. Caresana , F. , Bilancia , M. , Bartolini C.M. Numerical method for assessing the potential of smart engine thermal management: Application to a medium-upper segment passenger car Appl. Therm. Eng. 31 16 3559 3568 2011 10.1016/j.applthermaleng.2011.07.017
  2. Chalgren , R. and Allen , D. Light Duty Diesel Advanced Thermal Management SAE Technical Paper 2005-01-2020 2005 10.4271/2005-01-2020
  3. Dimopoulos , P. , Bacha , C. , Soltica , P. , Boulouchos , K. Hydrogen-natural gas blends fuelling passenger car engines: Combustion, emissions and well-to-wheels assessment Int. J. Hydrogen Energ. 33 23 7224 7236 2008 10.1016/j.ijhydene.2008.07.012
  4. Osada , H. , Uchida , N. , Shimada , K. , and Aoyagi , Y. Reexamination of Multiple Fuel Injections for Improving the Thermal Efficiency of a Heavy-Duty Diesel Engine SAE Technical Paper 2013-01-0909 2013 10.4271/2013-01-0909
  5. Sanli , A. , Ozsezen A.N. , Kilicaslan , I. , Canakci , M. The influence of engine speed and load on the heat transfer between gases and in-cylinder walls at fired and motored conditions of an IDI diesel engine Appl. Therm. Eng. 28 11-12 1395 1404 2008 10.1016/j.applthermaleng.2007.10.005
  6. Taymaz , i. An experimental study of energy balance in low heat rejection diesel engine Energy 31 2-3 364 371 2006 10.1016/j.energy.2005.02.004
  7. Morawitz , U. , Mehring , J. , and Schramm , L. Benefits of Thermal Spray Coatings in Internal Combustion Engines, with Specific View on Friction Reduction and Thermal Management SAE Technical Paper 2013-01-0292 2013 10.4271/2013-01-0292
  8. Serrano , J. , Olmeda , P. , Tiseira , A. , García-Cuevas , L. et al. Importance of Mechanical Losses Modeling in the Performance Prediction of Radial Turbochargers under Pulsating Flow Conditions SAE Int. J. Engines 6 2 729 738 2013 10.4271/2013-01-0577
  9. Benajes , J. et al. Analysis of the combustion process, pollutant emissions and efficiency of an innovative 2-stroke HSDI engine designed for automotive applications Appl. Therm. Eng. 58 1-2 181 193 10.1016/j.applthermaleng.2013.03.050
  10. Struwe , F. and Foster , D. In-Cylinder Measurement of Particulate Radiant Heat Transfer in a Direct Injection Diesel Engine SAE Technical Paper 2003-01-0072 2003 10.4271/2003-01-0072
  11. Furmanski , P. , Banaszek , J. , and Wisniewski , T. Radiation Heat Transfer in a Combustion Chamber of Diesel Engine with Partially Transparent Burnt Gas Zone SAE Technical Paper 980504 1998 10.4271/980504
  12. Vögelin , P. , Obrecht , P. , and Boulouchos , K. Experimental Investigation of Multi-In-Cylinder Pyrometer Measurements and Exhaust Soot Emissions Under Steady and Transient Operation of a Heavy-Duty Diesel Engine SAE Int. J. Engines 6 3 1855 1865 2013 10.4271/2013-24-0177
  13. Skeen , S. , Manin , J. , Pickett , L. , Dalen , K. et al. Quantitative Spatially Resolved Measurements of Total Radiation in High-Pressure Spray Flames SAE Technical Paper 2014-01-1252 2014 10.4271/2014-01-1252
  14. Flynn , P. , Mizusawa , M. , Uyehara , O. , and Myers , P. An Experimental Determination of the Instantaneous Potential Radiant Heat Transfer Within an Operating Diesel Engine SAE Technical Paper 720022 1972 10.4271/720022
  15. Li , X. and Wallace , J. In-Cylinder Measurement of Temperature and Soot Concentration Using the Two-Color Method SAE Technical Paper 950848 1995 10.4271/950848
  16. Tree , D.R , Svensson , K. I. Soot processes in compression ignition engines Progress in Energy and Combustion Science 33 2007 272 309
  17. Zhao , H.C. , and Broughton , F. P. Determination of True Temperature and Total Radiation From Luminous Gas Flames Ind. Eng. Chem. Anal. Ed. 4 2 166 175 1932 10.1021/ac50078a004
  18. Vattulainen , J. , Nummela , V. , Hernberg , R. and Kytölä , J. A system for quantitative imaging diagnostics and its application to pyrometric in-cylinder flame-temperature measurements in large diesel engines Meas. Sci. Technol. 11 2 2000 10.1088/0957-0233/11/2/303
  19. Musculus , P.B.M. , Singh , S. and Reitz , R. D. Gradient effects on two-color soot optical pyrometry in a heavy-duty DI diesel engine Combustion and Flame 153 216 227 2008 10.1016/j.combustflame.2007.10.023
  20. Pastor , J. , García , J. , Pastor , J. , and Buitrago , J. Analysis Methodology of Diesel Combustion by Using Flame Luminosity, Two-Colour Method and Laser-Induced Incandescence SAE Technical Paper 2005-24-012 2005 10.4271/2005-24-012
  21. DRIVVEN Stand Alone Direct Injector Driver System User's Manual October 2010 Drivven, INC 12001 Network Blvd, 110. San Antonio, Texas 78249 www.drivven.com http://www.drivven.com
  22. Payri , F. , Olmeda , P. , Martin , J. , and Carreño , R. A New Tool to Perform Global Energy Balances in DI Diesel Engines SAE Int. J. Engines 7 1 43 59 2014 10.4271/2014-01-0665
  23. Payri F. , Molina S. , Martín J. , Armas O. Influence of measurement errors and estimated parameters on combustion diagnosis Appl. Therm. Eng. 26 2e3 2006 226 236 http://dx.doi.org/10.1016/j.applthermaleng.2005.05.006
  24. Payri F. , Olmeda P. , Martín J. , García A. A complete 0D thermodynamic predictive model for direct injection diesel engines Appl. Energy 88 12 2011 4632 4641 http://dx.doi.org/10.1016/j.apenergy.2011.06.005
  25. Payri , F. , Galindo , J. , Martín , J. , and Arnau , F. A Simple Model for Predicting the Trapped Mass in a DI Diesel Engine SAE Technical Paper 2007-01-0494 2007 10.4271/2007-01-0494
  26. Lapuerta M. , Armas O. , Hernandez J.J. Diagnosis of DI diesel combustion from in-cylinder pressure signal by estimation of mean thermodynamic properties of the gas Appl. Therm. Eng. 19 5 1999 513 529 http://dx.doi.org/10.1016/S1359-4311(98)00075e1
  27. Payri , F. , Margot , X. , Gil , A. , and Martin , J. Computational Study of Heat Transfer to the Walls of a DI Diesel Engine SAE Technical Paper 2005-01-0210 2005 10.4271/2005-01-0210
  28. Benajes J. , Olmeda P. , Martín J. , Carreño R. A new methodology for uncertainties characterization in combustion diagnosis and thermodynamic modelling Appl. Therm. Eng. 71 2014 389 399 http://dx.doi.org/10.1016/j.applthermaleng.2014.07.010
  29. Payri F. , Pastor J. , Garcia J. Measurement Science and Technology 18 8 2579 2598 2007
  30. Zhao H. and Ladommatos N Progress in Energy and Combustion Science 24 3 221 255 1998
  31. Hottel H. and Broughton F. Industrial and Engineering Chemistry 4 2 166 175 1932
  32. Operating Manual Product and Guide Optical probe's manual
  33. Pickett L.M. and Siebers D.L. Soot in diesel fuel jets: effects of ambient temperature, ambient density, and injection pressure Combustion and Flame 138 2004 114 135
  34. Way RJB Methods for determination of composition and thermodynamic properties of combustion products for internal combustion engine calculations P I Mech Eng 1976 190 686 97
  35. Musculus , M. Measurements of the Influence of Soot Radiation on In-Cylinder Temperatures and Exhaust NOx in a Heavy-Duty DI Diesel Engine SAE Technical Paper 2005-01-0925 2005 10.4271/2005-01-0925
  36. Arrègle J. , Pastor J.V. , López J.J. , García A. Insights on postinjection-associated soot emissions in direct injection diesel engines Combustion and Flame 154 2008 448 461
  37. Lopez J.J. , García-Oliver J.M. , García , A. , Domenech V. Gasoline effects on spray characteristics, mixing and auto-ignition processes in a CI engine under Partially Premixed Combustion conditions Applied Thermal Engineering 70 2014 996 1006
  38. Manin , J. , Pickett , L. , and Skeen , S. Two-Color Diffused Back-Illumination Imaging as a Diagnostic for Time-Resolved Soot Measurements in Reacting Sprays SAE Int. J. Engines 6 4 1908 1921 2013 10.4271/2013-01-2548

Cited By