This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Study on the Influence of Material Parameters to Acoustic Performance
Technical Paper
2015-01-2200
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Acoustic performance of auto interiors is definitely important to control the NVH (noise, vibration, and harshness) performance inside a vehicle, and it is determined by the material parameters, such as density (ρ), thickness (d), open porosity (OP), airflow resistivity (σ), tortuosity (T), viscous characteristic length (VCL), thermal characteristic length (TCL), young's modulus, poisson's ratio, and damping coefficient. Firstly, by making different felt samples (of different surface density and thickness), the sound absorption performance and related parameters were obtained. Then the correlation between the parameters and the sound absorption coefficient (SAC) was summarized. Through this method, database of acoustic parameters and the corresponding SAC for porous materials can be established and sound package design and adjustment can be easily conducted based on the database.
Recommended Content
| Technical Paper | Acoustics Characterization of Nano Enhanced Open Cell Foams |
| Technical Paper | Structural Damping by the Use of Fibrous Materials |
Authors
Citation
Zhou, G., Tian, X., Zhu, K., Huang, W. et al., "Study on the Influence of Material Parameters to Acoustic Performance," SAE Technical Paper 2015-01-2200, 2015, https://doi.org/10.4271/2015-01-2200.Also In
References
- Ersoy Sezgin , Kucuk Haluk Investigation of industrial tea-leaf-fibre waste material for its sound absorption properties Applied Acoustics 70 2009 215 220
- Panneton , R. , Atalla , Y. , Blanchet , D. , and Bloor , M. Validation of the Inverse Method of Acoustic Material Characterization SAE Technical Paper 2003-01-1584 2003 10.4271/2003-01-1584
- Lu , T.J. , Hess A. , and Ashby M.F. Sound absorption in metallic foams Journal of Applied Physics 1999 85 11 7528 7539
- Hansen , Colin H. Solutions to problems in engineering noise control South Australia Department of Mechanical Engineering University of Adelaide 1996 178 181
- Sound Research Laboratories Noise control in industry Sound Research Laboratories 3rd London E. & FN. Spon 1991 245 247
- Allard J.-F. Propagation of Sound in Porous Media: Modeling Sound Absorbing Materials Elsevier Applied Science New York 1993
- Atalla Y. , Panneton R. Inverse Acoustical Characterization of Open Cell Porous Media Using Impedance Tube Measurements Canadian Acoustics 33 1 11 24 2005