This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Visualization of Cavitation Inside Nozzle Hole and Injected Liquid Jet
Technical Paper
2015-01-1908
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The atomization structure of the fuel spray is known to be affected by flow conditions and cavitation inside the nozzle hole. In this paper, the cavitation phenomena inside the nozzle hole was visualized by using large-scale transparent nozzles, as well as the effect of length-to-width ratio (l/w ratio) of the nozzle hole on cavitation and on the behavior of injection liquid jet. In addition, various flow patterns inside the nozzle hole same as experimental conditions were simulated by the use of Cavitation model incorporated in Star-CCM+, which was compared with experimental results.
Authors
Citation
Inagaki, R., Yamazaki, T., Haibara, T., Mitani, S. et al., "Visualization of Cavitation Inside Nozzle Hole and Injected Liquid Jet," SAE Technical Paper 2015-01-1908, 2015, https://doi.org/10.4271/2015-01-1908.Also In
References
- Nurick W. H. Orifice Cavitation and Its Effect on Spray Mixing Transactions of ASME, Journal of Fluids Engineering 98 681 687 1976
- Soteriou C. , Andrews R. and Smith M. Direct Injection Diesel Sprays and the Effect of Cavitation and Hydraulic Flip on Atomization SAE Paper No. 950080 1995
- Sou A. , Hosokawa S. and Tomiyama A. Effects of cavitation in a Nozzle on Liquid Jet Atomization International Journal of Heat & Transfer 50 17 18 3575 3582 2007
- Chaves H. , Knapp M. , Kubitzek A. , Obermeier F. and Sxhneider T. Experimental Study of Cavitation in the Nozzle Hole of Diesel Injectors Using Transparent Nozzles SAE Paper No. 950290 1995
- Arcoumanis C. , Badami M. , Flowa H. and Gavaises M. Cavitation in Real-Size Multi-Hole Diesel Injector Nozzles SAE Paper No. 2000-01-1249 2000
- Serras-Pereira J. , van Romunde Z. , Aleiferis P. G. , Richardson D. , Wallace S. and Cracknell R. F. Cavitation, primary break-up and flash boiling of gasoline, iso -octane and n -pentane with a realsize optical direct-injection nozzle Fuel 89 2592 2607 2010
- Huh K. Y. and Gosman A. D. A Phenomenological Model of Diesel Spray Atomization Proc. The International Conf. Multiphase Flows 515 518 1991
- Arcoumanis C. and Gavaises M. Linking the Nozzle Flow with Spray Characteristics in a Diesel Fuel Injector System Atomization and Sprays 8 3 1998
- von Kuensberg Sarre Christopher , Kong Song-Charng and Reitz Rolf D. Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays SAE Paper No. 1999-01-0912 1999
- Hiroyasu H. , Arai M. and Shimizu M. Break-up Length of a Liquid Jet and Internal Flow in a Nozzle Proc. ICLASS-91 1991
- Sou A. , Tomiyama A. , Hosokawa S. , Nigorikawa S. and Maeda T. Cavitation in a Two-Dimensional Nozzle and Liquid Jet Atomization (LDV Measurement of Liquid Velocity in a Nozzle) JSME International Journal, Series B 49 4 2006
- Papoulias D. , Giannadakis E. , Mitroglou N. , Gavaises M. and Theodorakakos A. Cavitation in Fuel Injection Systems for Spray-Guided Direct Injection Gasoline Engines SAE Paper No. 2007-01-1418 2007
- Kato Y. A new publication Cavitation -the foundation and progress- Maki book store 193 203 1999
- Oba R. and Ito Y. Cavitation Aspects in a Venturi (Johnson Effects in a Low Turbulent Flow) JSME B 45 398 449 450 1979
- Kato Y. A new publication Cavitation -the foundation and progress- Maki book store 219 221 1999