This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A High-Fidelity Study of High-Pressure Diesel Injection
Technical Paper
2015-01-1853
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A study of n-dodecane atomization, following the prescribed unseating of the needle tip, is presented for a high-pressure, non-cavitating Bosch Diesel injector (“Spray A”, in the Engine Combustion Network denomination). In the two simulations discussed here, the internal and external multiphase flows are seamlessly calculated across the injection orifice using an interface-capturing approach (for the liquid fuel surface) together with an embedded boundary formulation (for the injector's walls). This setting makes it possible to directly relate the liquid jet spray characteristics (under the assumption of sub-critical flow and with a grid resolution of 3 µm, or 1/30 of the orifice diameter) to the moving internal geometry of the injector. Another novelty is the capability of modeling the compressibility of the liquid and the gas phase while maintaining a sharp interface between the two. With an equation of state calibrated for n-dodecane, we briefly examine the difference in exit jet characteristics for adiabatic and isothermal wall conditions.
Citation
Arienti, M. and Sussman, M., "A High-Fidelity Study of High-Pressure Diesel Injection," SAE Technical Paper 2015-01-1853, 2015, https://doi.org/10.4271/2015-01-1853.Also In
References
- Arienti , M. and Sussman , M. An Embedded Level Set Method for Sharp-Interface Multiphase Simulations of Diesel Injectors Int. J. of Multiphase Flow 59 1 14 2014
- Bode , M. , Diewald , F. , Broll , D. , Heyse , J. , le Chenadec , V. , and Pitsch , H. Influence of the Injector Geometry on Primary Breakup in Diesel Injector Systems SAE Technical Paper 2014-01-1427 2014
- Caudwell , D.R. , Trusler , J.P.M. , Vesovic , V. and Wakeham , W. A. The Viscosity and Density of n-Dodecane and n-Octadecane at Pressures up to 200 MPa and Temperatures up to 473 K International Journal of Thermophysics 25 5 2004
- CCSE 2012 https://ccse.lbl.gov/BoxLib/index.html
- CMT “Virtual Injection Rate Generator www.cmt.upv.es/ECN09.aspx
- ECN 2013 http://www.sandia.gov/ecn/cvdata/targetCondition/injectorNozGeom.php
- ECN2 Proceedings Jan 2014 http://www.sandia.gov/ecn/workshop/ECN2.php
- Jemison , M. , Loch , E. , Sussman , M. , Shashkov , M. , Arienti , M. , Ohta , M. and Wang , Y. A Coupled Level Set-Moment of Fluid Method for Incompressible Two-Phase Flows J. of Scientific Computing 54 454 491 2013
- Jemison , M. , Sussman , M. , and Arienti , M. Compressible, Multi-Phase Semi-Implicit Method with Moment of Fluid Interface Representation J. of Computational Physics 279 182 217 2014
- Kadiouglu , S. Y. and Sussman , M. 2008 Adaptive Solution Techniques for Simulating Underwater Explosions and Implosions J. of Comp. Phys. 227 2083 2104
- Khasanshin , T. S. , Shchamialiou , A. P. , and Poddubskij , O. G. Thermodynamic Properties of Heavy n-Alkanes in the Liquid State: n-Dodecane International Journal of Thermophysics 24 5 2003
- Kastengren , A. L. , Tilocco , F. Z. , Powell , C. F. Manin , J. , Pickett , L. M. , Payri , R. , and Bazyn , T. 2012 Engine Combustion Network (ECN): Measurements of Nozzle Diameter and Hydraulic Behavior of Diesel Sprays Atomization and Sprays 19 11 1031 1044
- Padilla-Victoria , H. , Iglesias-Silva , G. A. , Ramos-Estrada , M. , Hall K. R. 2013 A correlation to predict speed of sound in liquids: 1. n-Alkanes (≥C 5 ) and their mixtures at high pressures Fluid Phase Equilibria 338 119 127
- Pickett , L. , Manin , J. , Payri , R. , Bardi , M. , and Gimeno , J. Transient Rate of Injection Effects on Spray Development SAE Technical Paper 2013-24-0001 2013
- Pickett , L. , Manin , J. , Kastengren , A. , and Powell , C. Comparison of Near-Field Structure and Growth of a Diesel Spray Using Light-Based Optical Microscopy and X-Ray Radiography SAE Int. J. Engines 7 2 1044 1053 2014 10.4271/2014-01-1412
- Pilliod , J. , Puckett , E. Second-order accurate volume-of-fluid algorithms for tracking material interfaces J. Computational Phys. 199 2 465 502 2004
- Shinjo , J. and Umemura , A. 2011 Detailed simulation of primary atomization mechanisms in Diesel jet sprays (isolated identification of liquid jet tip effects) Proceedings of the Combustion Institute 33 2089 2097
- Sussman , M. and Ohta , M. , 2009 A stable and efficient method for treating surface tension SIAM J. Sci. Comput. 31 2447 2471
- Xue , Q. , Som , S. , Battistoni , M. , Longman , D. E. Zhao , H. , Senecal , P. K. and Pomraning , E. Three-dimensional Simulations of the Transient Internal Flow in a Diesel Injector: Effects of Needle Movement In I LASS Americas, 25th Annual Conference on Liquid Atomization and Spray Systems Pittsburgh, PA May 2013