This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Influence of Short Rear End tapers on the Base Pressure of a Simplified Vehicle.

Journal Article
2015-01-1560
ISSN: 1946-3995, e-ISSN: 1946-4002
Published April 14, 2015 by SAE International in United States
Influence of Short Rear End tapers on the Base Pressure of a Simplified Vehicle.
Sector:
Topic:
Citation: Perry, A., Passmore, M., and Finney, A., "Influence of Short Rear End tapers on the Base Pressure of a Simplified Vehicle.," SAE Int. J. Passeng. Cars - Mech. Syst. 8(1):317-327, 2015, https://doi.org/10.4271/2015-01-1560.
Language: English

References

  1. Gurlek , C. , Sahin , B. , Memduh Ozhan , G. PIV studies around a bus model Experimental Thermal and Fluid Science 38 115 126 2012
  2. Beaudoin , J. , Aider , J. , Drag and Lift Reduction of a 3D bluff body using flaps Experiments in Fluids 44 491 501 2008
  3. McCallen , R. , Salari , K. , Ortega , J. , Castellucci , P. et al. DOE's Effort to Reduce Truck Aerodynamic Drag Through Joint Experiments and Computations SAE Technical Paper 2005-01-3511 2005 10.4271/2005-01-3511
  4. Howell , J. , Sims-Williams , D. , Sprot , A. , Hamlin , F. et al. Bluff Body Drag Reduction with Ventilated Base Cavities SAE Int. J. Passeng. Cars - Mech. Syst. 5 1 152 160 2012 10.4271/2012-01-0171
  5. Lanser , W. , Ross , J. , and Kaufman , A. Aerodynamic Performance of a Drag Reduction Device on a Full-Scale Tractor/Trailer SAE Technical Paper 912125 1991 10.4271/912125
  6. Aider , J. , Beaudoin , J. , Wesfreid , J.E. Drag & Lift Reduction of a 3D bluff-body using Active Vortex Generators Exp. Fluids 48 771 789 2010
  7. Englar , R. , Drag Reduction, Safety Enhancement, and Performance Improvement for Heavy Vehicles and SUVs Using Advanced Pneumatic Aerodynamic Technology SAE Technical Paper 2003-01-3378 2003 10.4271/2003-01-3378
  8. Joseph , P. , Amandolese , X. , Aider , J. , Drag Reduction on the 25° slant Angle Ahmed reference body using pulsed jets Exp. Fluids 52 5 1169 1185 2012
  9. Roumeas , M. , Gillieron , P. , Kourta , A. , Drag Reduction by Flow Separation Control on a Car Afterbody International Journal for Numerical Methods in Fluids 60 1222 1240 2009
  10. Irving Brown , Y. , Windsor , S. , and Gaylard , A. The Effect of Base Bleed and Rear Cavities on the Drag of an SUV SAE Technical Paper 2010-01-0512 2010 10.4271/2010-01-0512
  11. Howell , J. , Sheppard , A. , and Blakemore , A. Aerodynamic Drag Reduction for a Simple Bluff Body Using Base Bleed SAE Technical Paper 2003-01-0995 2003 10.4271/2003-01-0995
  12. Ahmed , S. , Ramm , G. , and Faltin , G. Some Salient Features Of The Time-Averaged Ground Vehicle Wake SAE Technical Paper 840300 1984 10.4271/840300
  13. Littlewood , R. and Passmore , M. The Optimization of Roof Trailing Edge Geometry of a Simple Square-Back SAE Technical Paper 2010-01-0510 2010 10.4271/2010-01-0510
  14. Littlewood , R. , Passmore , M. , and Wood , D. An Investigation into the Wake Structure of Square Back Vehicles and the Effect of Structure Modification on Resultant Vehicle Forces SAE Int. J. Engines 4 2 2629 2637 2011 10.4271/2011-37-0015
  15. Grandemange , M. , Mary , A. , Gohlke , M. , Cadot , O. , Effect on drag of the flow orientation at the base separation of a simplified blunt road vehicle Exp Fluids 54 1529 2013
  16. Johl , G. , Passmore , M. , Render , P. , Design Methodology and Performance of an indraft wind tunnel The Aeronautical Journal 108 1087 465 473 2004
  17. Howell , J. and Hickman , D. The Influence of Ground Simulation on the Aerodynamics of a Simple Car Model SAE Technical Paper 970134 1997 10.4271/970134
  18. Howell , J. and Le Good , G. The Effect of Backlight Aspect Ratio on Vortex and Base Drag for a Simple Car-Like Shape SAE Technical Paper 2008-01-0737 2008 10.4271/2008-01-0737
  19. Jowsey , L. , Passmore , M. , Experimental study of multiple-channel automotive underbody diffusers Proceedings of The Institution of Mechanical Engineers Part D - Journal of Automobile Engineering 224 865 879 2010
  20. Cooper , K. , Bertenyi , T. , Dutil , G. , Syms , J. et al. The Aerodynamic Performance of Automotive Underbody Diffusers SAE Technical Paper 980030 1998 10.4271/980030
  21. Howell , J. , Le Good , G. Vortex Drag for a Simple Car-Like Shape 5 th MIRA International Vehicle Aerodynamics Conference 13th October 2004

Cited By