This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Vehicle Mid-Frequency Response Using the Superelement Component Dynamic Synthesis Technique
Technical Paper
2015-01-1320
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper presents the Component Dynamic Synthesis (CDS) superelement creation, which contains the loading frequency information and is much faster than the Component Mode Synthesis (CMS) method in the residual run. The Frequency Response Functions (FRFs) are computed using the direct frequency response method and the inversion of dynamic stiffness matrix is done using the singular value decomposition (SVD) method for every discrete frequency in the frequency range of interest. The CDS will be very efficient and economical for design of experiments and robust optimization, where hundreds of runs are required. The CDS super element can be used when there is a large number of residual runs on a very large vehicle model at higher end of the frequency range of study. For the residual analysis to run as fast as possible, all components, except very small ones, need to be converted into CDS superelements. Numerical results demonstrate the efficacy of the CDS method for the prediction of mid-frequency responses for vehicle vibration and noise.
Recommended Content
Authors
Topic
Citation
Bennur, M., "Vehicle Mid-Frequency Response Using the Superelement Component Dynamic Synthesis Technique," SAE Technical Paper 2015-01-1320, 2015, https://doi.org/10.4271/2015-01-1320.Also In
References
- ZIENKIEWICZ O.C. The Finite Element Method 3rd McGraw-Hill Book Company NY 1979
- BATHE K.J. Finite Element Procedures in Engineering Analysis Prentice-Hall Inc. New Jersey 1982
- MSC.NASTRAN MSC.Software Corp. Newport Beach, California, USA
- OPTISTRUCT Altair Engineering Troy, Michigan, USA
- CDH-AG America, Michigan, USA
- MALLIKARJUNA and KANT T. Free vibration of symmetrically laminated plates using a higher order theory with finite element technique International Journal for Numerical Methods in Engineering 28 8 1875 1889 1989
- MALLIKARJUNA and KANT T. Transient response of isotropic, orthotropic and anisotropic composite-sandwich shells with the superparametric element International Journal of Applied Finite Elements and Computer Aided Engineering - Finite Elements in Analysis & Design 12 1 63 73 1992
- MALLIKARJUNA and KANT T. Effect of cross-sectional warping of anisotropic sandwich laminates due to dynamic loads using a refined theory and Co finite elements International Journal for Numerical Methods in Engineering 35 10 2031 2047 1992
- MALLIKARJUNA and KANT T. Finite element transient response of composite and sandwich plates with a refined theory Journal of Applied Mechanics - American Society of Mechanical Engineers 57 4 1084 1086 1990
- MALLIKARJUNA and KANT T. A general fibre reinforced composite shell element based on a refined shear deformation theory International Journal of Computers & Structures 42 3 381 388 1992
- FAFARD M. , BENNUR MALLIKARJUNA , and SAVARD M. A general multi-axle vehicle model to study the bridge-vehicle interaction International Journal for Computer Aided Engineering & Software - Engineering Computations 14 5 491 508 1997
- Bennur , M. Superelement, Component Mode Synthesis, and Automated Multilevel Substructuring for Rapid Vehicle Development SAE Int. J. Passeng. Cars - Mech. Syst. 1 1 268 279 2009 10.4271/2008-01-0287
- Bennur , M. Vehicle Acoustic Sensitivity Performance Using Virtual Engineering SAE Technical Paper 2011-01-1072 2011 10.4271/2011-01-1072
- Bennur , M. , Guan , J. , and Mandal , D. Advancement in Vehicle Development Using The Auto Transfer Path Analysis SAE Int. J. Passeng. Cars - Mech. Syst. 7 1 113 124 2014 10.4271/2014-01-0379
- Bennur , M. and Weiss , L. Hybrid Technique Based on Finite Element and Experimental Data for Automotive Applications SAE Technical Paper 2007-01-0466 2007 10.4271/2007-01-0466
- Bennur , M. , Posthuma , D. , and Lewitzke , C. High Performance Vehicle Chassis Structure for NVH Reduction SAE Technical Paper 2006-01-0708 2006 10.4271/2006-01-0708
- PIERRE CHRISTOPHE and CASTNIER MATTHEW P. Mid-Frequency Dynamics of Complex Structural Systems: Assessing the State of the Art and Defining Future Research Directions Report submitted to Air Force Office of Scientific Research Aerospace and Materials Science Structural Mechanics, Grant #F49620-01-1-0413 2002
- VALE URGUERIA ANTONIO PAULO Dynamic analysis of coupled structures using experimental data Ph.D. Thesis University of London 1989
- GOLUB , G.H. and KAHAN , W. Calculating the singular values and Pseudo-Inverse of a Matrix SIAM J. Numer. Anal. 2 1965
- WILKINSON , J.H. , and REINSCH , C. Linear Algebra Hand Book of Automatic Computation Springer Verlag 1971
- FRANCIS , J.G.F. The QR Transformation - Part 2 SIAM Review 23 1 1981
- CRAIG R.R. Jr. A review of time-domain and frequency- domain component mode synthesis methods International Journal of Analytical and Experimental Modal Analysis 2 59 72 1995
- HURTY , W.C. Dynamic Analysis of Structural Systems Using Component Modes AIAA Journal 3 4 678 685 1965
- CRAIG R.R. Jr. , and BAMPTON M.C.C. Coupling of substructures for dynamic analysis AIAA Journal 6 7 1313 1319 1968
- GRAFE HENNING Model updating of large structural dynamics models using measured response functions Ph.D. Thesis University of London 1998
- CRAIG Jr. , R.R. A review of time domain and frequency domain component mode synthesis methods Int. J. Anal. & Exper. Modal Analysis 2 2 59 72 1987
- HINTZ , R.M. Analytical methods in component mode synthesis AIAA Journal 13 8 1007 1016 1975
- HURTY , W.C. Dynamic analysis of structural systems using component modes AIAA Journal 3 1 678 685 1965
- CRAIG Jr. , R.R. and Bampton M.C.C. Coupling of substructures for dynamic analysis AIAA Journal 6 7 1313 1319 1968
- RUBIN , S. Improved component-mode representation for structural dynamic analysis AIAA Journal 13 8 995 1006
- CUPPENS K. , SAS P. , and HERMANS L. Evaluation of the FRF based substructuring and modal synthesis technique applied to vehicle FE data Flemish Research Project IWT-VPR Belgium
- HERMANS L. , MAS P. , LEURS W. , and BOUCART N. Estimation and use of residual modes in modal coupling calculations: A case study Proc. 18 th Inter. Modal Analysis Conf (IMAC) San Antonio, Texas 2000
- HERMANS L. , BRUGHMANS M. , and TZANNETAKIS N. Use of modal coupling and modification methods for the vibro-acoustic optimization of a car body VDI-Berichte 1550: Experimentalle and rechernerische modalanalyse sowie identification dynamischer systeme (VDI-Schwingungstagung) 543 557 2000
- De GERSEM H. , MOENS D. , DESMET W. , and VANDEPITTE D. Deviatoric component modes in an interval component mode synthesis procedure Proc. ISMA 2008
- BRAHMI K. , BOUHADDI N. , and FILLOD R. Reduction of junction degrees of freedom in certain methods of dynamic substructure synthesis 13 th Inter. Modal Analysis Conf. Nashville, USA 1995a
- BRAHMI K. , BOUHADDI N. , and FILLOD R. Reduction of junction degrees of freedom before assembly in dynamic substructuring Design Engg. Tech. Conf. ASME Boston, USA 1995b
- LOMBARD J.P. , BOUHADDI N. , and FILLOD R. A variant of the McNeal component mode synthesis method based on a congruent transformation 15 th Inter. Modal Anan. Conf. Orlando, USA 1997
- MacNeal R.H. A hybrid method of component mode synthesis Compu. & Struct. 1 581 601 1971
- BENNIGHOF J.K. and KIM C.K. An adaptive multi-level substructuring method for efficient modeling of complex structures Proceedings of the AIAA, 39 TH SDM Conference, 33 rd SDM Conference, 1631-1639 Dallas, TX 1992
- BENNIGHOF J.K. and KAPLAN M.F. Frequency sweep analysis using multi-level substructuring, global modes and iteration Proceedings of the AIAA, 39th SDM Conference Long Beach, CA 1998
- BENNIGHOF J.K. , KAPLAN M.F. , MULLER M.B. , KIM M. Meeting the NVH computational challenge: automated multilevel substructuring Proceedings of the International Modal Analysis Conference XVIII San Antonio, Texas 909 915 2000
- BENNIGHOF J.K. AND LEHOUCQ R.B. An automated multilevel substructuring method for the eigenspace computation in linear elastodynamics SIAM Journal Sci. Comput. 25 2084 2106 2004
- ELSSEL K. and VOSS H. Reducing huge gyroscopic eigenproblems by automated multi-level substructuring Archive of Applied Mechanics 76 171 179 2006
- ELSSEL K. and VOSS H. A modal approach for the gyroscopic quadratic eigenvalue problem Proc. European Congress on Computational Methods in Applied Sciences and Engineering Finland 2004