This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Study of a Highly Boosted and Efficient Downsized Ethanol Direct Injection (EDI) Engine in Two Different Configurations for the Purpose of Replacing High-Displacement Gasoline Engines
Technical Paper
2015-01-1255
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The paper presents a layout of a highly boosted Ethanol Direct Injected (EDI) engine with extreme downsizing, which represents a powerful means to reduce emissions at reduced production costs. The substitution of high-displacement engines (2.4- or 3.0-liter) by a downsized turbocharged EDI-engine is studied. The paper describes the detailed layout of all engine hardware and in particular, the cylinder head structure including the optimized intake and exhaust manifolds as well as implemented DI injectors. The paper continues with a presentation of the experimental data obtained at the engine test rig. The paper concludes presenting a series of experimental data obtained with the downsized engine mounted in a car as a replacement for its original high-displacement engine.
Recommended Content
Authors
Topic
Citation
Pontoppidan, M. and Baeta, J., "A Study of a Highly Boosted and Efficient Downsized Ethanol Direct Injection (EDI) Engine in Two Different Configurations for the Purpose of Replacing High-Displacement Gasoline Engines," SAE Technical Paper 2015-01-1255, 2015, https://doi.org/10.4271/2015-01-1255.Also In
References
- Bakenhus M. and Brusstar M. Economical, High-Efficiencies Engine Technologies for Alcohol Fuels EPA report 2005
- Radwan M. S. Performance and Knock Limits of Ethanol-Gasoline Blends in Spark-Ignited Engines SAE paper 850213 1985
- Dodge , L. , Shouse , K. , Grogan , J. , Leone , D. et al. Development of an Ethanol-Fueled Ultra-Low Emissions Vehicle SAE Technical Paper 981358 1998 10.4271/981358
- Metghalchi M. and Keck J. C. Burning Velocities of Mixtures of Air with Methanol, Isooctane and Indolene at High Pressure and Temperature Combustion and Flame 48 191 210 1989
- Marinov N. M. A Detailed Chemical Kinetic Model for High Temperature Ethanol Oxidation Int. J. Chemical Kinetics 31 3 183 220 1999
- Pontoppidan M. , Bonfiglioli S. , Damasceno F. and Montanari G. Mixture Preparation Optimization by CFD of a Flex-Vehicle (gasoline/ethanol) Intake System Layout SAE-Brazil paper 2004 - No do Resumo 118
- Pontoppidan M. , Bonfiglioli S. , Montanari and Ewald P Description of Technology Development Methods used to Implement Ethanol Mixture Preparation Systems on both Automotive and Aviation SIengines Proceedings of XVI ISAF-convention on Alcohol Fuels Rio de Janeiro November 2006 Section: Infrastructure, Consumption and Environment
- Lake , T. , Stokes , J. , Murphy , R. , Osborne , R. et al. Turbocharging Concepts for Downsized DI Gasoline Engines SAE Technical Paper 2004-01-0036 2004 10.4271/2004-01-0036
- Pollice G. , Diana S. , Giglio V. , Iorio B. , Rispoli N. Downsizing of SI engines by turbocharging Proceeding of ESDA 2006-95215, Torino ASME Conference July 2006
- Wirth , M. , Mayerhofer , U. , Piock , W. , and Fraidl , G. Turbocharging the DI Gasoline Engine SAE Technical Paper 2000-01-0251 2000 10.4271/2000-01-0251
- Bechtold R. L. Alternative Fuels Guidebool SAE International 1997
- Heywood J. B. Internal Combustion Engine Fundamentals McGraw-Hill 1988
- Hou , S. and Schmidt , D. Interaction Mechanisms between Closely Spaced Sprays SAE Technical Paper 2008-01-0946 2008 10.4271/2008-01-0946
- Hung , D. , Zhu , G. , Winkelman , J. , Stuecken , T. et al. A High Speed Flow Visualization Study of Fuel Spray Pattern Effect on Mixture Formation in a Low Pressure Direct Injection Gasoline Engine SAE Technical Paper 2007-01-1411 2007 10.4271/2007-01-1411
- Mitroglou , N. , Nouri , J. , Yan , Y. , Gavaises , M. et al. Spray Structure Generated by Multi-Hole Injectors for Gasoline Direct-Injection Engines SAE Technical Paper 2007-01-1417 2007 10.4271/2007-01-1417
- Pontoppidan M. , Bella G. and Rocco V. Mixture formation in SI-Engine intake Systems - A simplified theoretical Model with Experimental Verification ASME 1996 Spring Congress
- Pontoppidan , M. , Gaviani , G. , Bella , G. , and Rocco , V. Direct Fuel Injection - A Study of Injector Requirements for Different Mixture Preparation Concepts SAE Technical Paper 970628 1997 10.4271/970628
- Pontoppidan M. Combined use of 3D-CFD Simulation and direct Visualization Techniques to decrease the Optimization Procedure Complexity of Combustion chamber Layout and Engine Control Pre-mapping operation necessary for Online Engine Test rig Optimization Internationales Symposium für Verbrennungsdiagnostik 2002 Baden-Baden 137 147
- Amsden , A.A. , O'Rourke , P.J. and Butler C.D. KIVA II A Computer Program for Chemical Reactive Flows with Sprays Los Alamos National Labs. LA -11560-MS-1989
- Amsden , A.A. , O'Rourke , P.J. and Butler C.D. KIVA III: A KIVA Program with Block Structured Mesh for Complex Geometries Los Alamos National Labs. LA-12503-MS
- Alkidas Alex C. Combustion Advancements in gasoline engines Energy conversion and Management 48 2007
- VanDerWege , B. , Han , Z. , Iyer , C. , Muñoz , R. et al. Development and Analysis of a Spray-Guided DISI Combustion System Concept SAE Technical Paper 2003-01-3105 2003 10.4271/2003-01-3105
- Pontoppidan M. , Demaio A. , Rotondi R. Parametric Study of Physical Requirements for Successful Use of a Homogenous Charge Compression Ignition (HCCI) Approach in a Direct Injected Gasoline Engine
- Hyvönen , J. , Haraldsson , G. , and Johansson , B. Operating Conditions Using Spark Assisted HCCI Combustion During Combustion Mode Transfer to SI in a Multi-Cylinder VCR-HCCI Engine SAE Technical Paper 2005-01-0109 2005 10.4271/2005-01-0109
- Ayala , F. , Gerty , M. , and Heywood , J. Effects of Combustion Phasing, Relative Air-fuel Ratio, Compression Ratio, and Load on SI Engine Efficiency SAE Technical Paper 2006-01-0229 2006 10.4271/2006-01-0229
- Van Der Wege , B. , Han , Z. , Iyer , C. , Muñoz , R. et al. Development and Analysis of a Spray-Guided DISI Combustion System Concept SAE Technical Paper 2003-01-3105 2003 10.4271/2003-01-3105