This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Experimental and Numerical Investigations of Close-Coupled Pilot Injections to Reduce Combustion Noise in a Small-Bore Diesel Engine

Journal Article
2015-01-0796
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 14, 2015 by SAE International in United States
Experimental and Numerical Investigations of Close-Coupled Pilot Injections to Reduce Combustion Noise in a Small-Bore Diesel Engine
Sector:
Citation: Busch, S., Zha, K., Miles, P., Warey, A. et al., "Experimental and Numerical Investigations of Close-Coupled Pilot Injections to Reduce Combustion Noise in a Small-Bore Diesel Engine," SAE Int. J. Engines 8(2):660-678, 2015, https://doi.org/10.4271/2015-01-0796.
Language: English

References

  1. Russell , M. , Young , C. , and Nicol , S. Modulation of Injection Rate to Improve Direct Injection Diesel Engine Noise SAE Technical Paper 900349 1990 10.4271/900349
  2. Dürnholz , M. , Endres , H. , and Frisse , P. Preinjection A Measure to Optimize the Emission Behavior of DI-Diesel Engine SAE Technical Paper 940674 1994 10.4271/940674
  3. The new 1.3 Multijet II 95 HP (Euro5) engine is making its first appearance on the Fiat 500 and 500C Fiat Group Automobile Press 25 Nov. 2009 www.fiatgroupautomobilespress.com/cartelle/zoom/4594 March 2014
  4. Diesel Systems: Common Rail Systems CRS2 with 1,600 to 2,000 bar and solenoid injectors Robert Bosch GmbH, Diesel Systems 2011 March 2014
  5. Badami , M. , Millo , F. , and D'Amato , D. Experimental Investigation on Soot and NOx Formation in a DI Common Rail Diesel Engine with Pilot Injection SAE Technical Paper 2001-01-0657 2001 10.4271/2001-01-0657
  6. Ricaud , J.C. and Lavoisier , F. Optimizing the multiple injection settings on an HSDI diesel engine Proceedings of the Conference on Thermo- and Fluid-Dynamic Processes in Diesel Engines 251 275 Valencia 2002
  7. Sahoo , D. , Petersen , B. , and Miles , P. Measurement of Equivalence Ratio in a Light-Duty Low Temperature Combustion Diesel Engine by Planar Laser Induced Fluorescence of a Fuel Tracer SAE Int. J. Engines 4 2 2312 2325 2011 10.4271/2011-24-0064
  8. Sahoo , D. , Miles , P. , Trost , J. , and Leipertz , A. The Impact of Fuel Mass, Injection Pressure, Ambient Temperature, and Swirl Ratio on the Mixture Preparation of a Pilot Injection SAE Int. J. Engines 6 3 1716 1730 2013 10.4271/2013-24-0061
  9. Miles , P. , Sahoo , D. , Busch , S. , Trost , J. et al. Pilot Injection Ignition Properties Under Low-Temperature, Dilute In-Cylinder Conditions SAE Int. J. Engines 6 4 1888 1907 2013 10.4271/2013-01-2531
  10. Heywood , J.B. Internal Combustion Engine Fundamentals McGraw-Hill New York 1988
  11. The Allrounder Moehwald GmbH (Bosch Group) Website Moehwald GmbH 15 Sept. 2014 http://www.moehwald.de/runtime/cms.run/doc/English/150/HDA.html
  12. Busch , S. and Miles , P.C. Parametric Study of Injection Rates with Solenoid Injectors in an Injection Quantity and Rate Measuring Device Proceedings of the ASME 2014 ICEF October 19 22 2014
  13. Colban , W. , Miles , P. , and Oh , S. On the Cyclic Variability and Sources of Unburned Hydrocarbon Emissions in Low Temperature Diesel Combustion Systems SAE Technical Paper 2007-01-1837 2007 10.4271/2007-01-1837
  14. Shahlari , A. , Hocking , C. , Kurtz , E. , and Ghandhi , J. Comparison of Compression Ignition Engine Noise Metrics in Low-Temperature Combustion Regimes SAE Int. J. Engines 6 1 541 552 2013 10.4271/2013-01-1659
  15. Brunt , M. and Platts , K. Calculation of Heat Release in Direct Injection Diesel Engines SAE Technical Paper 1999-01-0187 1999 10.4271/1999-01-0187
  16. Kashdan , J. and Bruneaux , G. Laser-Induced Phosphorescence Measurements of Combustion Chamber Surface Temperature on a Single-Cylinder Diesel Engine SAE Technical Paper 2011-01-2049 2011 10.4271/2011-01-2049
  17. Naber , J. and Siebers , D. Effects of Gas Density and Vaporization on Penetration and Dispersion of Diesel Sprays SAE Technical Paper 960034 1996 10.4271/960034
  18. Hiroyasu , H. and Arai , M. Structures of Fuel Sprays in Diesel Engines SAE Technical Paper 900475 1990 10.4271/900475
  19. Reitz , R. and Bracco , F. On the Dependence of Spray Angle and Other Spray Parameters on Nozzle Design and Operating Conditions SAE Technical Paper 790494 1979 10.4271/790494
  20. Payri , R. , Salvador , F. , Gimeno , J. , and de la Morena , J. Macroscopic Behavior of Diesel Sprays in the Near-Nozzle Field SAE Int. J. Engines 1 1 528 536 2009 10.4271/2008-01-0929
  21. Lide , D.R. CRC Handbook of Chemistry and Physics 84 th CRC press 2003
  22. Banipal , T.S. ; Garg , S.K. ; Ahluwalia , J.C. Heat capacities and densities of liquid n-octane, n-nonane, n-decane, and n-hexadecane at temperatures from 318.15 to 373.15 K and at pressures up to 10 MPa Journal of Chemical Thermodynamics 1991 23 923 931
  23. Hasse , C. , Peters , N. Modelling of ignition mechanisms and pollutant formation in direct-injection Diesel engines with multiple injections International Journal of Engine Research 6 3 231 246 June 1 2005
  24. Smith , W.J. Modern Optical Engineering 4th McGraw-Hill New York 2008
  25. McFarlane , N.J.B. , Schofield , C.P. Segmentation and tracking of piglets in images Machine Vision and Applications 8 3 187 193 1995

Cited By