This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Combustion Visualization, Performance, and CFD Modeling of a Pre-Chamber Turbulent Jet Ignition System in a Rapid Compression Machine

Journal Article
2015-01-0779
ISSN: 1946-3936, e-ISSN: 1946-3944
Published April 14, 2015 by SAE International in United States
Combustion Visualization, Performance, and CFD Modeling of a Pre-Chamber Turbulent Jet Ignition System in a Rapid Compression Machine
Sector:
Citation: Gentz, G., Thelen, B., Litke, P., Hoke, J. et al., "Combustion Visualization, Performance, and CFD Modeling of a Pre-Chamber Turbulent Jet Ignition System in a Rapid Compression Machine," SAE Int. J. Engines 8(2):538-546, 2015, https://doi.org/10.4271/2015-01-0779.
Language: English

References

  1. Toulson , E. , Schock , H. , and Attard , W. A Review of Pre- Chamber Initiated Jet Ignition Combustion Systems SAE Technical Paper 2010-01-2263 2010 10.4271/2010-01-2263
  2. Attard , W. , Blaxill , H. , Anderson , E. , and Litke , P. Knock Limit Extension with a Gasoline Fueled Pre-Chamber Jet Igniter in a Modern Vehicle Powertrain SAE Int. J. Engines 5 3 1201 1215 2012 10.4271/2012-01-1143
  3. Attard , W. and Parsons , P. Flame Kernel Development for a Spark Initiated Pre-Chamber Combustion System Capable of High Load, High Efficiency and Near Zero NOx Emissions SAE Int. J. Engines 3 2 408 427 2010 10.4271/2010-01-2260
  4. Attard , W. , Fraser , N. , Parsons , P. , and Toulson , E. A Turbulent Jet Ignition Pre-Chamber Combustion System for Large Fuel Economy Improvements in a Modern Vehicle Powertrain SAE Int. J. Engines 3 2 20 37 2010 10.4271/2010-01-1457
  5. Anderson , E. , Attard , W. , Brown , A. , Litke , P. et al. Experimental Study of a Pre-Chamber Jet Igniter in a Turbocharged Rotax 914 Aircraft Engine SAE Technical Paper 2013-01-1629 2013 10.4271/2013-01-1629
  6. Attard , W. , Kohn , J. , and Parsons , P. Ignition Energy Development for a Spark Initiated Combustion System Capable of High Load, High Efficiency and Near Zero NOx Emissions SAE Int. J. Engines 3 2 481 496 2010 10.4271/2010-32-0088
  7. Lumsden G. The Phenomena of Hydrogen Assisted Jet Ignition Ph.D. Thesis The Department of Mechanical Engineering, The University of Melbourne 1995
  8. Toulson , E. , Huisjen , A. , Chen , X. , Squibb , C. et al. Visualization of Propane and Natural Gas Spark Ignition and Turbulent Jet Ignition Combustion SAE Int. J. Engines 5 4 1821 1835 2012 10.4271/2012-32-0002
  9. Attard , W. , Toulson , E. , Huisjen , A. , Chen , X. et al. Spark Ignition and Pre-Chamber Turbulent Jet Ignition Combustion Visualization SAE Technical Paper 2012-01-0823 2012 10.4271/2012-01-0823
  10. Maxson , J. , Hensinger , D. , Hom , K. , and Oppenheim , A. Performance of Multiple Stream Pulsed Jet Combustion Systems SAE Technical Paper 910565 1991 10.4271/910565
  11. Sadanandan R. , Schießl R. , Markus D. , Maas U. 2D Mixture Fraction Studies in a Hot-Jet Ignition Configuration Using NO-LIF and Correlation Analysis Flow Turbulence Combust 86 2011 45 62 10.1007/s10494-010-9285-0
  12. Chinnathambi P.K. , Abdullah , Rajagopal , Manikanda , Nalim , Razi Experimental Study of Traversing Hot-Jet Ignition of Lean Hydrocarbon-Air Mixtures in a Constant-Volume Combustor 8 th U.S. National Combustion Meeting the Western States Section of the Combustion Institute the University of Utah May 19 22 2013
  13. Murase , E. and Hanada , K. Enhancement of Combustion by Injection of Radicals SAE Technical Paper 2000-01-0194 2000 10.4271/2000-01-0194
  14. Murase , E. and Hanada , K. Control of the Start of HCCI Combustion by Pulsed Flame Jet SAE Technical Paper 2002-01-2867 2002 10.4271/2002-01-2867
  15. Allen C. , Toulson E. , Edwards T. , Lee T. Combustion and Flame Application of a novel charge preparation approach to testing the autoignition characteristics of JP-8 and camelina hydroprocessed renewable jet fuel in a rapid compression machine 159 2012 2780 2788 10.1016/j.combustflame.2012.03.019
  16. Allen C. , Valco D. , Toulson E. , Edwards T. , Lee T. Ignition behavior and surrogate modeling of JP-8 and of camelina and tallow hydrotreated renewable jet fuels at low temperatures Combustion and Flame 160 2013 232 239 10.1016/j.combustflame.2012.10.008
  17. Shiga S. , Ozone S. , Machacon H.T.C. , Karasawa T. , Nakamura H. , Ueda T. , Jingu N. , Huang Z. , Tsue M. , Kono M. A study of the combustion and emission characteristics of compressed-natural-gas direct-injection stratified combustion using a rapid- compression-machine Combustion and Flame 129 2002 1 10 10.1016/S0010-2180(01)00367-4
  18. Mittal M.Z. , G. Schock , H. Fast mass-fraction-burned calculation using the net pressure method for real-time applications Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering (Part D: J. Automobile Engineering 2009 223 3 389 394 10.1243/09544070JAUTO1006
  19. Sadanandan R. , Markus D. , Schießl R. , Maas U. , Olofsson J. , Seyfried H. , Richter M. , Aldén M. Detailed Investigation of ignition by hot gas jets Proceedings of the Combustion Institute 31 2007 719 726 10.1016/j.proci.2006.08.027
  20. Attard , W. and Blaxill , H. A Lean Burn Gasoline Fueled Pre- Chamber Jet Ignition Combustion System Achieving High Efficiency and Low NOx at Part Load SAE Technical Paper 2012-01-1146 2012 10.4271/2012-01-1146
  21. Richards , K. , Senecal , P. , and Pomraning , E. CONVERGE (Version 1.4.1) Convergent Science, Inc. Middleton, WI 2012
  22. Senecal , P. , Richards , K. , Pomraning , E. , Yang , T. et al. A New Parallel Cut-Cell Cartesian CFD Code for Rapid Grid Generation Applied to In-Cylinder Diesel Engine Simulations SAE Technical Paper 2007-01-0159 2007 10.4271/2007-01-0159
  23. University of California at San Diego, Mechanical and Aerospace Engineering (Combustion Research) Chemical-Kinetic Mechanisms for Combustion Applications http://combustion.ucsd.edu Aug. 2014
  24. Thelen B. , Gentz G. , Toulson E. Computational Study of a Turbulent Jet Ignition System for Lean Burn Operation in a Rapid Compression Machine SAE Technical Paper 2015-01-0396

Cited By