This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of Interfacial Shear Stress on Flexural Properties of Wood Filled Steel Tube
Technical Paper
2015-01-0728
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The behavior of composite material is a result of integrated contribution of fiber, matrix, and fiber/matrix interface. Applied load to members must effectively get transferred from matrix to fibers via interface. It is extremely important to study and understand the nature of the interface of any given composite system. The flexural behavior of wood filled steel tubes is largely dependent on interactions at wood/steel interface.
The objective of this paper is to present the work carried out to study the behavior and determine the interfacial shear stress in wood filled steel tubes. Interfacial shear stress is studied considering simple mechanical bonding by interference fit and adhesive bonding by structural epoxy adhesive.
The experimental results obtained indicate that the interfacial shearing strength is higher in the case of adhesively bonded wood/steel interface. And also the moment capacity of rectangular wood filled steel tubes of adhesively bonded wood/steel interface is higher. This also proves that flexural behavior of wood filled steel tubes is largely dependent on interfacial shear strength. It is also observed that the adhesively bonded beams fail in tensile at the bottom face incase of short beams having span-to-depth ratio about 6.9 and long beams having span-to-depth ratio about 13.6 fail in compression at top face with v-shape on both side webs.
Authors
Citation
Malagi, R. and Danawade, B., "Effect of Interfacial Shear Stress on Flexural Properties of Wood Filled Steel Tube," SAE Technical Paper 2015-01-0728, 2015, https://doi.org/10.4271/2015-01-0728.Also In
References
- Chawal K.K. Composite Materials Science and Engineering Springer New Delhi 978-81-8128-490-7 101 120 2009
- Lu H. Han L. et al. Analytical Behavior of Circular Concrete Filled Thin Walled Steel Tube Subjected to Bending Thin-Walled Structures 47 346 358 2009 10.1016/j.tws.2008.07.004
- Lu Y.Q. Kennedy D.J.L The Flexural Behavior of Concrete Filled Hollow Structural Sections Canadian Journal of Civil Engineering 21 1 111 130 1994
- Elchalakani M. , Zhao X. L. et al. Concrete Filed Circular Steel Tubes Subjected to Pure Bending Journal of Constructional Steel Research 57 1141 1168 2001
- Han L. , Yao G. et al. Performance of concrete filled thin walled steel tubes under pure torsion Thin-Walled Structures 45 24 36 2007 10.1016/j.tws.2007.01.008
- Roeder C.W. , Cameron B. et al. Composite Action in Concrete Filled Tubes Journal of Structural Engineering 125 5 477 484 1999
- Morishita Y. , Tomii M. et al. Experimental Studies on Strength in Concrete Filled Square and Octagonal Steel Tubular Columns Subjected to Axial Loads Transactions of Japanese Concrete Institute 359 366 1979
- Han L. Flexural Behavior of Concrete Filled Steel Tubes Journal of Constructional Steel Research 60 313 337 2004 10.1016/j/jcsr.2003.08.009
- Lu F.W. , Li S.P. et al. Flexural Behavior of Concrete Filled Non-Uni-Thickness Walled Rectangular Steel Tube Journal of Constructional Steel Structures 63 1051 1057 2007 10.1016/j.jesr.2006.09.006
- Kang J. , Choi E. et al. Flexural Behavior of Concrete Filled Steel Tube Members and Its Application Steel Structures 7 319 324 2007
- Danawade , B. , Malagi , R. , and Malagi , S. Flexural Strength Properties of Teak Wood Filled Rectangular Hollow Sectioned Thin Steel Tube and its Application in Automobile SAE Technical Paper 2013-01-1179 2013 10.4271/2013-01-1179
- ASTM D143 Standard method of testing small clear specimens of timber American Society for Testing and Materials 1994
- ASTM E8/E8M Standard Test Methods for Tension Testing of Metallic Materials American Society for Testing and Materials 2011
- Pidilite Industries Limited Fevitite Superfast Product Catalogue, CC-RF-SUPERFAST-ENG-09/08 2009
- ASTM D2344 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates 2013
- ASTM D198 Standard Test Methods of Static Tests of Lumber in Structural Sizes American Society for Testing and Materials 2009
- ASTM D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials American Society for Testing and Materials 2010
- Danawade B.A. , Malagi R.R. et al. Effect of Span-to-Depth Ratio on Flexural Properties of Wood Filled Steel Tubes Procedia Materials Science 5 96 105 2014 10.1016/j.mspro.2014.07.246