This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Induction Mode Operation in the Electrical Machine with DC Stator Excitation
Technical Paper
2015-01-0151
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The purpose of this paper is to investigate opportunity to create a new type AC induction motor with the salient pole rotor (without winding) and both winding AC excitation and short circuited placed on the stator. There are some advantages in this design: The suggested design has a cold rotor. The stator short circuited and excitation windings are easier for cooling. The rotor has reduced weight in compare with regular induction motor rotor. The short circuit winding can be used for the current control like in the regular induction wound-rotor machines. In this case, the problem maintenance of the slip rings is eliminated. In this paper, we discuss theoretical opportunity for realization the induction mode operation in two and three phase machines. As a base for this, it serves the analyses operation of one phase machine. This analysis is fulfilled in comparison with regular induction motors with short circuited and wound-rotor windings. Experimental verification was fulfilled in specially designed one phase machine, two phase and three phase machines. Design two and three phase machine demands use two windings for each phase like in regular induction machines. The results of this paper in connection with our previous publications shows that it is possible to design all type of traditional AC and DC machines on base of the salient pole rotor (without winding) and all winding placed on the stator.
Recommended Content
Technical Paper | A Simulation Method of Rear Axle Gear Noise |
Technical Paper | Design of an Aeronautical Engine Test Stand |
Technical Paper | Driveline Optimization to Reduce the Noise in 4X4 Heavy Commercial Vehicle |
Authors
Topic
Citation
Gladyshev, S., Okrainskaya, I., and Gladyshev, P., "Induction Mode Operation in the Electrical Machine with DC Stator Excitation," SAE Technical Paper 2015-01-0151, 2015, https://doi.org/10.4271/2015-01-0151.Also In
References
- Electric Machines: Theory, Operation, Applications, Adjustment, and Control 2nd Prentice Hall Upper Saddle River, NJ 2002
- Gladyshev , S. , Mi , C. , and Okrainskaya , I. , One Phase Machine with DC Stator Excitation SAE Technical Paper 2010-01-0489 2010 10.4271/2010-01-0489
- Walker J.H. The Theory of the Inductor Alternator Proc. IEE 89 1942 227 241
- Raymond Ramshaw , van Heeswijk R. G. Energy Conversion, Electric Motors and Generators Sauders College Publishing, A Division of Holt, Rinehart and Winston Inc. 1990
- Gladyshev , S. and Okrainskaya , I. , Synchronous Mode Operation in Electrical Machine with DC Stator Excitation SAE Technical Paper 2013-01-1412 2013 10.4271/2013-01-1412
- Gladyshev , S. and Okrainskaya , I. , Brushless Series Connected Machine with DC Stator Excitation SAE Technical Paper 2012-01-0505 2012 10.4271/2012-01-0505
- Matsch , L. W. , and Morgan J.D. Electromagnetic and Electromechanical Machines Harper and Row New York 1986